Ultra fast sequencing workflow. Punch-in FX lets you add quick, rapid-firing, unique, live variations and adding individual step components creates an extra dimension and deep rhythmic patterns. Randomize note timing, velocity and pitch, or use live automation to alter filters. use brain to create chord progressions, generating tracks that reinvent themselves.

Run every track, independently, at different speeds and lengths to form powerful polyrhythms. Create new sequences every time with step components, variations that can be added to any step on the sequencer, controlling everything from altering pitch to bending, skipping or even multiplying steps.

The 2 Vrms main output drives any sound system, real loud. Keep everything locked in sync and sequenced with the multi-out and take control with midi-in. Process and sample external audio with the audio-in. control, record and charge with the audio/midi host over usb-c, plus a complete wireless experience with midi over bluetooth.

Compose your album, head off to the gig, plug and play immediately, then keep everything locked-in with all the i/o you could ask for. 16-hour, battery-powered freedom lets you perform for hours on-end. create, produce and perform anywhere.

Features

• 8 unique synth engines
• new drum sampler + multisampler + synth sampler
• 4 filter types
• 24-voice multitimbral synthesis
• instant sampling
• 6 built-in FX
• master eq, saturator, compressor and limiter
• 24 punch-in FX for performance
• creative tape looper
• 2 sequenceable built-in FX slots
• midi channels selectable per track
• 10 000+ project files with version history
• 16-track, 64-step step sequencer with 4 pages
• 9 patterns per track, 99 scenes
• song mode with 9 songs per project
• 10 grooves for creative swing
• usb-c audio/midi host and device
• audio-out
• a multi-out jack, for cv, midi, audio and sync out
• midi-in + audio-in
• built-in speaker + mic
• smooth parameter locks
• pressure sensitive pitchbend
• bluetooth LE midi
• microtonal tuning
• performance gyroscope

Specs

• Dimensions:282 x 102 x 13.5 mm
• Weight: 900g

The post Teenage Engineering OP-XY Portable Synthesizer / Sampler / Sequencer appeared first on Elevator Sound.

Features

• 12 synth engines
• sampler, drum machine and sequencer
• tape recorder
• built in effects
• ultra-portable
• dimensions: 28.8 cm x 10.2 cm x 2.9 cm
• weight: 589 g / 20.8 oz

The post Teenage Engineering OP-1 Field Portable Sampler/Synthesizer appeared first on Elevator Sound.

The EP–1320 comes with hundreds of medieval sounds and samples, a redesigned set of send effects and punch-in fx, a brand new arpeggiator and a collection of craftily captured multi-sampled instruments. the line input and the internal microphone allow you to sample your own sounds in just seconds. whether you’re into making sultry serenades or bubonic beats, the EP–1320 has you covered.

Alongside a bucketful of one-shot samples the instrumentalis electronicum features a number of readily playable medieval instruments – play them on the pads or on an external midi keyboard. In demus mode, choose any of the 9 medieval songs and jam along using the sounds and instruments on the four banks. add some punch-in fx and you’re ready to send any tavern floor into a frenzy! (also perfect for banquets and fetes).

Features

• built-in mic and speaker
• 6 stereo voices / 12 mono
• 128 MB memory including 96 MB ROM sounds and 32 MB user sample memory
• 9 built-in demo songs
• 9 user projects
• 7 built-in FX and 12 punch-in FX
• pressure sensitive keys and multifunctional faedr
• sampling frequency: 46 kHz / 16-bit
• 1x stereo in/out, sync in/out, midi in/out and usb-c
• powered by 4x AAA batteries, or via usb-c.

Dimensions and Weight

• 240 mm x 176 mm x 16 mm
• 9.45″ x 6.93″ x 0.63″ inches
• 620 g / 22 oz

The post Teenage Engineering EP-1320 Medieval Desktop Sequencer and Sampler appeared first on Elevator Sound.

]]> https://www.elevatorsound.com/product/elektron-digitakt-ii-desktop-stereo-sampler-and-sequencer-b-stock/ Mon, 02 Dec 2024 17:56:38 +0000 https://www.elevatorsound.com/?post_type=product&p=95612 *Returned after initial use after customer decided on something else. Item is in as new condition with the screen protector still on, the box, all the accessories and a full warranty* Send yourself to another sampling dimension. With Digitakt II, you can weave splinters of sound in stereo, ripped from the moment and brought to your fingertips for marvellous audio manipulation and beat arraying. Preserve or distort reality as you so desire with 16 tracks ready for stereo or mono samples, or MIDI. Choose from several swappable filters for each track and utilise a wide assortment of effects and modulation, pull on enhanced processing power, and enough memory for a lifetime of samples.Further tasty features like a Euclidean sequence generator, an extended 128 step sequencer, kits, trig modes, an extensive sample library, and a modular workflow to play with ensure your sonic-montage sculpting potential will know no beat-making bounds. Specifications Audio track features 16 × stereo or mono audio tracks, or MIDI tracks 5 × selectable SRC (audio) machines: Oneshot Werp Stretch Repitch Grid 5 × selectable FLTR machines: Multi-Mode Lowpass 4 Equalizer Comb Legacy LP/HP 1 × digital base-width filter per track 1 × digital overdrive per track 1 […]

The post Elektron Digitakt II Desktop Stereo Sampler and Sequencer [B-Stock] appeared first on Elevator Sound.

]]> *Returned after initial use after customer decided on something else. Item is in as new condition with the screen protector still on, the box, all the accessories and a full warranty*

Send yourself to another sampling dimension. With Digitakt II, you can weave splinters of sound in stereo, ripped from the moment and brought to your fingertips for marvellous audio manipulation and beat arraying. Preserve or distort reality as you so desire with 16 tracks ready for stereo or mono samples, or MIDI. Choose from several swappable filters for each track and utilise a wide assortment of effects and modulation, pull on enhanced processing power, and enough memory for a lifetime of samples.Further tasty features like a Euclidean sequence generator, an extended 128 step sequencer, kits, trig modes, an extensive sample library, and a modular workflow to play with ensure your sonic-montage sculpting potential will know no beat-making bounds.

Specifications

Audio track features

• 16 × stereo or mono audio tracks, or MIDI tracks
• 5 × selectable SRC (audio) machines:
  • Oneshot
  • Werp
  • Stretch
  • Repitch
  • Grid
• 5 × selectable FLTR machines:
  • Multi-Mode
  • Lowpass 4
  • Equalizer
  • Comb
  • Legacy LP/HP
• 1 × digital base-width filter per track
• 1 × digital overdrive per track
• 1 × digital bit reduction
• 1 × digital sample rate reduction
• 1 × overdrive master effect
• 1 × stereo compressor master effect
• 3 × assignable LFOs per track
• 400 MB sample memory
• 20 GB +Drive storage
• Diverse sample library

MIDI track features

• 4 note polyphony per step
• 16 × assignable CC controls
• 2 × assignable LFOs per track

Performance features

• 4 × Trig modes
  • Tracks
  • Velocity
  • Retrigs (only works on audio tracks)
  • Preset pool (only works on audio tracks)
• Keyboard mode with 36 different scales
• Song Mode

Sequencer features

• 128 steps per pattern and track
• Individual pattern length per track
• Individual time scale multiplier per track
• Parameter locks
• Trig conditions & trig chance
• Retrig (audio tracks only)
• Micro timing
• 1 × Euclidean sequence generator per track

Send effects

• Saturator Delay
• Supervoid Reverb
• Panoramic Chorus

Hardware

• 128 × 64 pixel OLED screen
• 2 × ¼” impedance balanced audio out jacks
• 2 × ¼” impedance balanced audio in jacks
• 1 × ¼” stereo headphone jack
• 48 kHz, 24-bit D/A and A/D converters
• Hi-Speed USB 2.0 port
• MIDI In/Out/Thru with DIN Sync out

Physical specifications

• Sturdy steel casing
• Dimensions: W 215 × D 176 × H 63 mm (8.5? × 6.9? × 2.5?) (including knobs and feet)
• Weight: approximately 1.48 kg (3.25 lbs)
• 100 × 100 mm VESA mounting holes. Use M4 screws with a max length of 7 mm.

Miscellaneous

• Overbridge enabled
• Class Compliant USB Audio
• External Input mixer
• 3 year Elektron warranty

Included in the box

• Power Supply PSU-3c
• Elektron USB cable
• Exclusive artwork

The post Elektron Digitakt II Desktop Stereo Sampler and Sequencer [B-Stock] appeared first on Elevator Sound.

]]> https://www.elevatorsound.com/product/elektron-digitakt-ii-desktop-stereo-sampler-and-sequencer/ Wed, 24 Apr 2024 17:00:42 +0000 https://www.elevatorsound.com/?post_type=product&p=89990 Send yourself to another sampling dimension. With Digitakt II, you can weave splinters of sound in stereo, ripped from the moment and brought to your fingertips for marvellous audio manipulation and beat arraying. Preserve or distort reality as you so desire with 16 tracks ready for stereo or mono samples, or MIDI. Choose from several swappable filters for each track and utilise a wide assortment of effects and modulation, pull on enhanced processing power, and enough memory for a lifetime of samples.Further tasty features like a Euclidean sequence generator, an extended 128 step sequencer, kits, trig modes, an extensive sample library, and a modular workflow to play with ensure your sonic-montage sculpting potential will know no beat-making bounds. Specifications Audio track features 16 × stereo or mono audio tracks, or MIDI tracks 5 × selectable SRC (audio) machines: Oneshot Werp Stretch Repitch Grid 5 × selectable FLTR machines: Multi-Mode Lowpass 4 Equalizer Comb Legacy LP/HP 1 × digital base-width filter per track 1 × digital overdrive per track 1 × digital bit reduction 1 × digital sample rate reduction 1 × overdrive master effect 1 × stereo compressor master effect 3 × assignable LFOs per track 400 MB sample memory […]

The post Elektron Digitakt II Desktop Stereo Sampler and Sequencer appeared first on Elevator Sound.

]]> Send yourself to another sampling dimension. With Digitakt II, you can weave splinters of sound in stereo, ripped from the moment and brought to your fingertips for marvellous audio manipulation and beat arraying. Preserve or distort reality as you so desire with 16 tracks ready for stereo or mono samples, or MIDI. Choose from several swappable filters for each track and utilise a wide assortment of effects and modulation, pull on enhanced processing power, and enough memory for a lifetime of samples.Further tasty features like a Euclidean sequence generator, an extended 128 step sequencer, kits, trig modes, an extensive sample library, and a modular workflow to play with ensure your sonic-montage sculpting potential will know no beat-making bounds.

Specifications

Audio track features

• 16 × stereo or mono audio tracks, or MIDI tracks
• 5 × selectable SRC (audio) machines:
  • Oneshot
  • Werp
  • Stretch
  • Repitch
  • Grid
• 5 × selectable FLTR machines:
  • Multi-Mode
  • Lowpass 4
  • Equalizer
  • Comb
  • Legacy LP/HP
• 1 × digital base-width filter per track
• 1 × digital overdrive per track
• 1 × digital bit reduction
• 1 × digital sample rate reduction
• 1 × overdrive master effect
• 1 × stereo compressor master effect
• 3 × assignable LFOs per track
• 400 MB sample memory
• 20 GB +Drive storage
• Diverse sample library

MIDI track features

• 4 note polyphony per step
• 16 × assignable CC controls
• 2 × assignable LFOs per track

Performance features

• 4 × Trig modes
  • Tracks
  • Velocity
  • Retrigs (only works on audio tracks)
  • Preset pool (only works on audio tracks)
• Keyboard mode with 36 different scales
• Song Mode

Sequencer features

• 128 steps per pattern and track
• Individual pattern length per track
• Individual time scale multiplier per track
• Parameter locks
• Trig conditions & trig chance
• Retrig (audio tracks only)
• Micro timing
• 1 × Euclidean sequence generator per track

Send effects

• Saturator Delay
• Supervoid Reverb
• Panoramic Chorus

Hardware

• 128 × 64 pixel OLED screen
• 2 × ¼” impedance balanced audio out jacks
• 2 × ¼” impedance balanced audio in jacks
• 1 × ¼” stereo headphone jack
• 48 kHz, 24-bit D/A and A/D converters
• Hi-Speed USB 2.0 port
• MIDI In/Out/Thru with DIN Sync out

Physical specifications

• Sturdy steel casing
• Dimensions: W 215 × D 176 × H 63 mm (8.5? × 6.9? × 2.5?) (including knobs and feet)
• Weight: approximately 1.48 kg (3.25 lbs)
• 100 × 100 mm VESA mounting holes. Use M4 screws with a max length of 7 mm.

Miscellaneous

• Overbridge enabled
• Class Compliant USB Audio
• External Input mixer
• 3 year Elektron warranty

Included in the box

• Power Supply PSU-3c
• Elektron USB cable
• Exclusive artwork

The post Elektron Digitakt II Desktop Stereo Sampler and Sequencer appeared first on Elevator Sound.

]]> https://www.elevatorsound.com/product/chompi-club-chompi-desktop-sampler/ Mon, 15 Jan 2024 19:51:26 +0000 https://www.elevatorsound.com/?post_type=product&p=87331 CHOMPI is a quirky, chromatic sampler and tape music instrument, inviting you into the magical world of sound design. With its unique stereo sampling engine, expressive multi-effects and varispeed “tape” style looper; CHOMPI is ready for immediate fun. Special care was taken with sourcing quality materials for CHOMPI’s hardware, but many aspects of the platform have also been designed with user customization in mind. The modular panel enclosure, MX mechanical key switches & keycaps, and dj style encoder knobs can all be customized and retrofitted by the user to match their own unique style. CHOMPI’s workflow is designed to be user-friendly and accessible to individuals of all experience levels… So whether you’ve been playing music for years, or are just starting your sonic journey, CHOMPI just might become your new favorite buddy! Features Unique screenless workflow utilizes rgb LED indicators Endless push button encoders for multi-page parameter controls Two octave chromatic keyboard utilizes MX Cherry switches 3 selectable sampling sources Built-in microphone Stereo Aux input Resample master output signal Minimal, yet capable sound design engine: Sample playback speed & direction control Sample start & end point control Sample attack & release/decay envelope Single knob multi-FX section Pg 1 Magic Wand: […]

The post Chompi Club Chompi Desktop Sampler appeared first on Elevator Sound.

]]> CHOMPI is a quirky, chromatic sampler and tape music instrument, inviting you into the magical world of sound design. With its unique stereo sampling engine, expressive multi-effects and varispeed “tape” style looper; CHOMPI is ready for immediate fun.

Special care was taken with sourcing quality materials for CHOMPI’s hardware, but many aspects of the platform have also been designed with user customization in mind. The modular panel enclosure, MX mechanical key switches & keycaps, and dj style encoder knobs can all be customized and retrofitted by the user to match their own unique style.

CHOMPI’s workflow is designed to be user-friendly and accessible to individuals of all experience levels… So whether you’ve been playing music for years, or are just starting your sonic journey, CHOMPI just might become your new favorite buddy!

Features

• Unique screenless workflow utilizes rgb LED indicators
• Endless push button encoders for multi-page parameter controls
• Two octave chromatic keyboard utilizes MX Cherry switches
• 3 selectable sampling sources
• Built-in microphone
• Stereo Aux input
• Resample master output signal
• Minimal, yet capable sound design engine:
• Sample playback speed & direction control
• Sample start & end point control
• Sample attack & release/decay envelope
• Single knob multi-FX section
• Pg 1 Magic Wand: combo delay + reverb
• Pg 2 Tape Saturation: w/ wow & flutter
• Pg 3 Multi-Mode Filter:
• Varispeed tape-style looper
• Transport knob provides control over loop playback speed & direction, as well as manual tape scrubbing when loop is paused
• Overdub decay controls allow for “frippertronics” loop composition techniques
• Real time audio thru mode for live FX and loop recording
• Two types of sample playback engines: chromatic & 1-shot
• 7 Voice Polyphony
• 84 Slots to Save/Recall Presets (3 banks of 14 slots per engine)
• ~6hrs of sample storage capacity on Micro SD card
• 16-bit, 48kHz stereo audio I/O
• USB-C and rechargeable battery power
• Built-In Microphone
• 3.5mm Stereo Aux Input
• 3.5mm Stereo Line Output
• 3.5mm Headphone Output
• 3.5mm and/or USB-C Midi In & Out

Specs

• Dimensions: 13” Wide x 4.5” Deep (without Handle) 5.75” Deep (with Handle) x 2.5” Tall (table/surface to top of encoders)
• Weight = 2lb 3oz
• Recommended USB power brick spec: 5V ? 2A (or higher)
• Manufactured in California, USA

Included In The Box

• 1x CHOMPI Sampler (Classic Black & Gold Colorway)
• 1x USB-C Cable
• 1x Quickstart Guide
• 1x CHOMPI Sticker

Manufacturer Product Page HERE
Manufacturer Manual HERE

The post Chompi Club Chompi Desktop Sampler appeared first on Elevator Sound.

]]> https://www.elevatorsound.com/product/teenage-engineering-ep-133-koii-desktop-sequencer-and-sampler/ Wed, 22 Nov 2023 14:17:08 +0000 https://www.elevatorsound.com/?post_type=product&p=85711 Meet the next evolution of the world’s most sold sampler. based on the legendary PO-33 K.O!, the new EP–133 K.O. II adds more power, more sampling capabilities, a fully reworked sequencer and brand new punch-in 2.0™ effects. introducing a workflow that lets you go from idea to track faster than ever. it’s pocket operators gone pro. EP–133 K.O. II is a powerful sampler, sequencer and composer. record sounds around you, sequence your samples and loops, tweak and automate filter, pitch and more, add stereo effects, compressor and next generation punch-in effects – go from idea to track faster than ever. built-in mic and speaker 6 stereo voices / 12 mono 64 MB memory, or 999 sample slots built-in effects pressure sensitive keys and multifunctional fader sampling frequency: 46 kHz / 16-bit 1x stereo in/out, sync in/out, midi in/out and usb-c powered by 4x AAA batteries, or via usb-c. dimensions: 240 mm x 176 mm x 16 mm comes in a limited edition 10″ collectors box Record sounds around you, sample your voice, favourite synths, vinyl records or whatever audio that you’ve got on your phone. Sequence your samples and loops. make use of the curated selection of drums, bass and […]

The post Teenage Engineering EP-133 K.O.II Desktop Sequencer and Sampler appeared first on Elevator Sound.

]]> Meet the next evolution of the world’s most sold sampler. based on the legendary PO-33 K.O!, the new EP–133 K.O. II adds more power, more sampling capabilities, a fully reworked sequencer and brand new punch-in 2.0 effects. introducing a workflow that lets you go from idea to track faster than ever. it’s pocket operators gone pro.

EP–133 K.O. II is a powerful sampler, sequencer and composer. record sounds around you, sequence your samples and loops, tweak and automate filter, pitch and more, add stereo effects, compressor and next generation punch-in effects – go from idea to track faster than ever.

• built-in mic and speaker
• 6 stereo voices / 12 mono
• 64 MB memory, or 999 sample slots
• built-in effects
• pressure sensitive keys and multifunctional fader
• sampling frequency: 46 kHz / 16-bit
• 1x stereo in/out, sync in/out, midi in/out and usb-c
• powered by 4x AAA batteries, or via usb-c.
• dimensions: 240 mm x 176 mm x 16 mm
• comes in a limited edition 10″ collectors box

Record sounds around you, sample your voice, favourite synths, vinyl records or whatever audio that you’ve got on your phone.
Sequence your samples and loops. make use of the curated selection of drums, bass and keys that come pre-loaded on your K.O. II.
Tweak and automate things like filter, pitch and more… add stereo effects, compressor and next generation punch-in effects.

Features

• 9 projects each with 80,000 notes
• projects contain 4 groups, each with 99 patterns
• patterns have 12 tracks for samples and midi
• variable pattern length per group (1 to 99 bars)
• 12 mono / 6 stereo voice polyphony
• use groups to mix and match patterns on the fly
• record and automate all 12 fader assignments
• sequence in free time or quantized with swing
• assign any pad to one of 16 midi channels
• loop mode from OB–4 with length and slide
• 12 pressure and velocity sensitive padsv
• instantaneous time correction and erase
• slice samples live or automatically
• stereo / mono sampling at 46.875 kHz / 16-bit
• punch-in 2.0 effects (pressure sensitive)
• arrange quickly using the instant commit feature
• 32-bit float signal chain, 24-bit adc/dac
• sync io for ext. gear. 8th, 16th note or sync24
• 6 built-in send fx and a master compressor
• drag and drop samples using the sample tool

The sequencer engine of the K.O. II provides an intuitive, fast way of building up beats and variations using 4 groups x 12 patterns. like most daws, you can instantly swap patterns per group, experiment with different combos to find what beat and bass lines work together. the commit button helps you freeze a point in time and move on, adding a verse or a break. it all happens in real time while playing.

K.O.II Highlights

• built-in mic and speaker
• usb–c
• midi output
• midi input
• sync output
• sync input
• audio input
• audio output
• 4x aaa batteries
• one-two punch
• vintage style keys with a modern touch, combining tactility with pressure sensitivity.
• sampling frequency: 46 kHz / 16-bit
• internal signal chain: 32-bit
• 999 sample slots
• 64 MB memory
• preset samples
• high resolution sequencer
• built-in FX
• fader and pressure sensitive pads
• six stereo voices, twelve mono
• runs on 4x AAA batteries with the option to be powered via usb-c

Dimensions and Weight

• 240 mm x 176 mm x 16 mm
• 9.45″ x 6.93″ x 0.63″ inches
• 620 g / 22 oz

The post Teenage Engineering EP-133 K.O.II Desktop Sequencer and Sampler appeared first on Elevator Sound.

]]> https://www.elevatorsound.com/product/torso-electronics-s-4-desktop-sculpting-sampler/ Thu, 16 Nov 2023 15:00:59 +0000 https://www.elevatorsound.com/?post_type=product&p=85501 The S-4 is a sculpting sampler designed to capture and transform sounds. Merging tape-era workflows with cutting-edge technology, the S-4 redefines sound mangling by providing a futuristic platform for crafting unique soundscapes and compositions, using samples and real-time audio processing. S-4 is a tool made for sonic explorers. It has four parallel stereo tracks, each with an audio engine featuring a chain of audio devices including samplers, live granular processing, morphing resonators, and a range of audio effects. A novel modulation system allows anything and everything to be modulated with 4 modulators per track. Capture sounds on the fly with the onboard microphone and stereo line input, or load samples from the four gigabyte internal flash storage. Specifications Audio engine 4 parallel stereo audio tracks Tape player with live looping capabilities Polyphonic sample player Live granular processing with time-warping and pitch-shifting algorithms Morphing resonator (48-band filter bank) Bit crushing, drive, and compression Combined reverb and delay with pitch-shifting and shimmer Modulation 4 modulators per track Modulate any parameter of the audio engine Modulator types: Complex LFOs Generative sequencing tools Envelopes Hardware Quad-core 1.5 GHz processor 4 GB flash memory (sample pool) 24-bit / 48 kHz stereo audio in and out […]

The post Torso Electronics S-4 Desktop Sculpting Sampler appeared first on Elevator Sound.

]]> The S-4 is a sculpting sampler designed to capture and transform sounds. Merging tape-era workflows with cutting-edge technology, the S-4 redefines sound mangling by providing a futuristic platform for crafting unique soundscapes and compositions, using samples and real-time audio processing.

S-4 is a tool made for sonic explorers. It has four parallel stereo tracks, each with an audio engine featuring a chain of audio devices including samplers, live granular processing, morphing resonators, and a range of audio effects. A novel modulation system allows anything and everything to be modulated with 4 modulators per track.

Capture sounds on the fly with the onboard microphone and stereo line input, or load samples from the four gigabyte internal flash storage.

Specifications

Audio engine

• 4 parallel stereo audio tracks
• Tape player with live looping capabilities
• Polyphonic sample player
• Live granular processing with time-warping and pitch-shifting algorithms
• Morphing resonator (48-band filter bank)
• Bit crushing, drive, and compression
• Combined reverb and delay with pitch-shifting and shimmer

Modulation

• 4 modulators per track
• Modulate any parameter of the audio engine
• Modulator types:
  • Complex LFOs
  • Generative sequencing tools
  • Envelopes

Hardware

• Quad-core 1.5 GHz processor
• 4 GB flash memory (sample pool)
• 24-bit / 48 kHz stereo audio in and out

I/O

• 2 line-inputs
• 2 line-outputs
• Built-in microphone
• Stereo headphone output
• MIDI in/out
• Analog sync in/out
• USB-C

Miscellaneous

• WiFi – Ableton Link
• Class-compliant USB audio interface
• Expandable number of inputs/outputs with class-compliant USB interfaces User interface
• High-resolution LCD color display, 3.5 inch
• 21 tactile RGB buttons
• 9 high-quality endless encoders

Physical

• Matte black aluminum casing
• Dimensions: 242 x 156 x 39 mm (9.5” x 6.1” x 1.5”)
• Weight: 820g (1.8 lbs)

Manufacturer product page here.

The post Torso Electronics S-4 Desktop Sculpting Sampler appeared first on Elevator Sound.

]]> https://www.elevatorsound.com/product/polyend-play-16-track-groovebox-synth-and-sequencer/ Tue, 05 Dec 2023 18:43:50 +0000 https://www.elevatorsound.com/?post_type=product&p=86265 Play+ is the modern groovebox experience, elevated. With an upgraded internal architecture and the same Play form factor, Play+ delivers richer stereo sounds, multitimbral polyphonic synthesis, seamless audio over USB, and a host of new features and enhancements. Advanced Capabilities with an Intuitive Interface Play+ strikes the perfect balance between advanced sequencing options and intuitive control, making it easy to create complex evolving patterns. Features include deep generative capabilities, randomization functions, track-specific swing, length, and speed adjustments. Play+ also includes an innovative performance mode and the capability to sequence every parameter on a per-step basis. Multitimbral Synthesizer Play+ features four built-in synth engines, each offering a unique character: ACD: A recreation of iconic single-oscillator monophonic analog synths, with a lightning-fast synthesis experience. FAT: A powerhouse synth engine that epitomizes the lush, vintage warmth of classic analog synthesizers. VAP: A versatile Virtual Analog Polysynth, ideal for creating mesmerizing textures, lush pads, and one-of-a-kind sound effects. WTFM: A unique 2-operator FM synth engine that utilizes WaveTable-based oscillators driven by a 3x feedback system. Stereo Expansion Play+ now supports stereo sample playback, allowing for a more nuanced and expansive sonic canvas. Seamless Audio over USB Play+ can send 14 stereo tracks into your […]

The post Polyend Play+ 16 Track Groovebox, Synth and Sequencer appeared first on Elevator Sound.

]]> Play+ is the modern groovebox experience, elevated. With an upgraded internal architecture and the same Play form factor, Play+ delivers richer stereo sounds, multitimbral polyphonic synthesis, seamless audio over USB, and a host of new features and enhancements.

Advanced Capabilities with an Intuitive Interface

Play+ strikes the perfect balance between advanced sequencing options and intuitive control, making it easy to create complex evolving patterns. Features include deep generative capabilities, randomization functions, track-specific swing, length, and speed adjustments. Play+ also includes an innovative performance mode and the capability to sequence every parameter on a per-step basis.

Multitimbral Synthesizer

Play+ features four built-in synth engines, each offering a unique character:

• ACD: A recreation of iconic single-oscillator monophonic analog synths, with a lightning-fast synthesis experience.
• FAT: A powerhouse synth engine that epitomizes the lush, vintage warmth of classic analog synthesizers.
• VAP: A versatile Virtual Analog Polysynth, ideal for creating mesmerizing textures, lush pads, and one-of-a-kind sound effects.
• WTFM: A unique 2-operator FM synth engine that utilizes WaveTable-based oscillators driven by a 3x feedback system.
  Stereo Expansion

Play+ now supports stereo sample playback, allowing for a more nuanced and expansive sonic canvas.

Seamless Audio over USB

Play+ can send 14 stereo tracks into your DAW, ensuring precision and flexibility in post-production. This makes it easy to multi-track your sessions, add effects, and mix and master your tracks to perfection.

Play+, The Complete Groovebox Solution

Play+ is a groovebox for musicians of all levels. With its powerful synth engines, advanced sequencing capabilities, and seamless audio over USB integration, Play+ is the perfect tool for creating and performing electronic music.

Manufacturer product page here.
Product manual here.

The post Polyend Play+ 16 Track Groovebox, Synth and Sequencer appeared first on Elevator Sound.

]]> https://www.elevatorsound.com/product/oficina-de-sonido-la-golden-acapulco-dub-siren-and-desktop-sampler/ Mon, 14 Aug 2023 18:02:19 +0000 https://www.elevatorsound.com/?post_type=product&p=81911 La Golden Acapulco Dub Siren is a dub siren style analogue synthesizer with variable pitch and rate, as well as three different wave forms. You can play the siren in three different modes, changing your set into a veridical sonidero or an old school sound system. This machine also contains a monophonic sampler with 12 samples, divided in 3 banks of 4 sound effects each. It works with a SD card (included) with sound effects, but you can add your own files too! Features: Monophonic dub siren and sampler Dub Siren: Analog LFO-shaped synth voice 12 slot, one shot sampler Manufacturers Product Page HERE

The post Oficina De Sonido La Golden Acapulco Dub Siren and Desktop Sampler appeared first on Elevator Sound.

]]> La Golden Acapulco Dub Siren is a dub siren style analogue synthesizer with variable pitch and rate, as well as three different wave forms. You can play the siren in three different modes, changing your set into a veridical sonidero or an old school sound system.

This machine also contains a monophonic sampler with 12 samples, divided in 3 banks of 4 sound effects each. It works with a SD card (included) with sound effects, but you can add your own files too!

Features:

• Monophonic dub siren and sampler
• Dub Siren: Analog LFO-shaped synth voice
• 12 slot, one shot sampler

Manufacturers Product Page HERE

The post Oficina De Sonido La Golden Acapulco Dub Siren and Desktop Sampler appeared first on Elevator Sound.

]]>