Controllers Archives - Elevator Sound https://www.elevatorsound.com/product-category/controllers/ Eurorack Modular, Synthesizer & Electronic Music Hardware Store Sat, 28 Sep 2024 12:52:09 +0000 en-GB hourly 1 https://wordpress.org/?v=6.7.1 Buchla LEM218 CV/MIDI Touchplate Keyboard https://www.elevatorsound.com/product/buchla-lem218-cv-midi-touchplate-keyboard/ Thu, 22 Aug 2024 15:50:06 +0000 https://www.elevatorsound.com/?post_type=product&p=92896 The third iteration of one of the most used touch interfaces, the 218, as the LEM218v3: The 218e version3 Lunar Excursion Module. The first design appeared in the 1973 release of the Buchla Music Easel and named for the spacecraft that delivered astronauts to the moon. Providing the familiar piano key layout for this early mobile music machine, the additional controls and capabilities were an interface for exploring uncharted musical territory. With the new version 3, it’s been updated with a new foundation of stable, modern electronics and plenty of inputs and outputs to integrate with your Buchla, MIDI, and Eurorack gear. The incredible sensitivity and accuracy of the redesigned touch bed means the lightest touch will produce triggers and control voltage for your setup. The adjustable sensor has the dynamic range and durability to handle your playing. The new texture not only improves the sensing, but provides a satisfying tactile experience. As always, pressure is an expressive output, adding an extra dimension to the control. MIDI outputs velocity and polyphony, as well as channel pressure, making the LEM218 a uniquely expressive controller for all your synthesizers. The configurable touchstrip adds a fantastic addition for pitch bend or as an […]

The post Buchla LEM218 CV/MIDI Touchplate Keyboard appeared first on Elevator Sound.

]]> The third iteration of one of the most used touch interfaces, the 218, as the LEM218v3: The 218e version3 Lunar Excursion Module. The first design appeared in the 1973 release of the Buchla Music Easel and named for the spacecraft that delivered astronauts to the moon. Providing the familiar piano key layout for this early mobile music machine, the additional controls and capabilities were an interface for exploring uncharted musical territory. With the new version 3, it’s been updated with a new foundation of stable, modern electronics and plenty of inputs and outputs to integrate with your Buchla, MIDI, and Eurorack gear.

The incredible sensitivity and accuracy of the redesigned touch bed means the lightest touch will produce triggers and control voltage for your setup. The adjustable sensor has the dynamic range and durability to handle your playing. The new texture not only improves the sensing, but provides a satisfying tactile experience. As always, pressure is an expressive output, adding an extra dimension to the control. MIDI outputs velocity and polyphony, as well as channel pressure, making the LEM218 a uniquely expressive controller for all your synthesizers. The configurable touchstrip adds a fantastic addition for pitch bend or as an additional modulator to patch into your system

Even if you don’t have any Buchla products, the LEM 218 v3 is designed to work with your Eurorack-compatible gear. Four 3.5mm jacks output 1v/octave pitch, 0-8 volts pressure, touchstrip voltage, and gate outputs for use with Eurorack equipment. Or, combine your Euro with your Buchla instruments. If NATO can do it, so can you. The sound design possibilities will blow your mind

A pulse input allows the arpeggiator to be driven by external inputs and are allowed to interact with the automated notes to make the pattern more complex. Additional controls allow you to blend different patterns and randomness to easily change from the expected to the surprising

The classic preset voltage knobs offer several possible ways to shift your sounds into new territory. Not only can the knobs be used for quick access to voltages for your patch, they can control arpeggiation modes and octave shifting. Pads output pulses for additional control

Such a unique device will spark many ideas. With easy front panel configuration, you can quickly customize the velocity and pressure sensitivity, MIDI channel, knob behavior, and more. No cumbersome software setups, just simple settings with the keys and knobs, and you’re ready to play.

The post Buchla LEM218 CV/MIDI Touchplate Keyboard appeared first on Elevator Sound.

]]> AtoVproject 16n Faderbank CV and MIDI Controller (Silver) https://www.elevatorsound.com/product/atovproject-16n-faderbank-cv-and-midi-controller-silver/ Mon, 31 Jul 2023 15:08:28 +0000 https://www.elevatorsound.com/?post_type=product&p=81496 The 16n AtoVproject Rework is aimed at solving a problem very specific to modular synthesis. As a patch is getting more and more complex a forest of cables has grown over your system before you know it. This module allows you to take the control from the modular into a very ergonomic controller that integrates perfectly into a modern studio. The 16n AtoVproject Rework is a controller sending CV, I2C, MIDI jack, USB MIDI (compatible PC, Mac, iPad etc…), making it the absolute ultimate controller for any of your hardware and software all in one! Even better this controller can either be used as a Eurorack module or as a standalone unit using the beautiful aluminum enclosure. In 2019, the Berlin Modular community showed interest in building the 16n Faderbank. As one of the Berlin Modular community organizers, I decided to make a redesign of the 16n faderbank following the suggestions and desires of our members. The 16n AtoVproject Rework is the result. The 16n AtoVproject rework is a complete redesign of the original open source (CC-BY-SA) project 16n faderbank. This project was originated by Brian Crabtree, Sean Hellfritsch, Tom Armitage, Brendon Cassidy. As wished by the original designers the […]

The post AtoVproject 16n Faderbank CV and MIDI Controller (Silver) appeared first on Elevator Sound.

]]> The 16n AtoVproject Rework is aimed at solving a problem very specific to modular synthesis. As a patch is getting more and more complex a forest of cables has grown over your system before you know it. This module allows you to take the control from the modular into a very ergonomic controller that integrates perfectly into a modern studio.

The 16n AtoVproject Rework is a controller sending CV, I2C, MIDI jack, USB MIDI (compatible PC, Mac, iPad etc…), making it the absolute ultimate controller for any of your hardware and software all in one!

Even better this controller can either be used as a Eurorack module or as a standalone unit using the beautiful aluminum enclosure.

In 2019, the Berlin Modular community showed interest in building the 16n Faderbank. As one of the Berlin Modular community organizers, I decided to make a redesign of the 16n faderbank following the suggestions and desires of our members. The 16n AtoVproject Rework is the result.

The 16n AtoVproject rework is a complete redesign of the original open source (CC-BY-SA) project 16n faderbank. This project was originated by Brian Crabtree, Sean Hellfritsch, Tom Armitage, Brendon Cassidy. As wished by the original designers the 16n AtoVproject rework is also open source and uses the same CC-BY-SA licence.

Features

  • 16 high-end Alps faders
  • Eurorack compatible (50hp) and standalone enclosure (for use in or out of the rack)
  • Selectable 0-5V or 0-10V CV output range (independent setting for each fader)
  • High stability power conditioning for high stability analog outputs
  • Soft MIDI thru. MIDI data sent to the 16n through USB is echoed to the MIDI jack (Since firmware v2.1.0)
  • Utility connector on the back of the unit to simplify the use of i2c with modules like the ER301

This version of the 16n Faderbank ships with:

  • AtoVproject 16n Rework Eurorack module
  • Enclosure for standalone use (Alumunium Powder coated)
  • USB cable (High quality 1.5m braided and shielded)
  • MIDI din to Jack adapter (90° angled, Type A)
  • Eurorack Power Cable

Dimensions

  • 254 x 135 x 42 mm inside the case
  • 27mm deep under panel in Eurorack power cable

Manufacturer product page here.
Product manual here.

The post AtoVproject 16n Faderbank CV and MIDI Controller (Silver) appeared first on Elevator Sound.

]]> AtoVproject 16n Faderbank CV and MIDI Controller (Black) https://www.elevatorsound.com/product/atovproject-16n-faderbank-cv-and-midi-controller-black/ Mon, 31 Jul 2023 15:07:51 +0000 https://www.elevatorsound.com/?post_type=product&p=81491 The 16n AtoVproject Rework is aimed at solving a problem very specific to modular synthesis. As a patch is getting more and more complex a forest of cables has grown over your system before you know it. This module allows you to take the control from the modular into a very ergonomic controller that integrates perfectly into a modern studio. The 16n AtoVproject Rework is a controller sending CV, I2C, MIDI jack, USB MIDI (compatible PC, Mac, iPad etc…), making it the absolute ultimate controller for any of your hardware and software all in one! Even better this controller can either be used as a Eurorack module or as a standalone unit using the beautiful aluminum enclosure. In 2019, the Berlin Modular community showed interest in building the 16n Faderbank. As one of the Berlin Modular community organizers, I decided to make a redesign of the 16n faderbank following the suggestions and desires of our members. The 16n AtoVproject Rework is the result. The 16n AtoVproject rework is a complete redesign of the original open source (CC-BY-SA) project 16n faderbank. This project was originated by Brian Crabtree, Sean Hellfritsch, Tom Armitage, Brendon Cassidy. As wished by the original designers the […]

The post AtoVproject 16n Faderbank CV and MIDI Controller (Black) appeared first on Elevator Sound.

]]> The 16n AtoVproject Rework is aimed at solving a problem very specific to modular synthesis. As a patch is getting more and more complex a forest of cables has grown over your system before you know it. This module allows you to take the control from the modular into a very ergonomic controller that integrates perfectly into a modern studio.

The 16n AtoVproject Rework is a controller sending CV, I2C, MIDI jack, USB MIDI (compatible PC, Mac, iPad etc…), making it the absolute ultimate controller for any of your hardware and software all in one!

Even better this controller can either be used as a Eurorack module or as a standalone unit using the beautiful aluminum enclosure.

In 2019, the Berlin Modular community showed interest in building the 16n Faderbank. As one of the Berlin Modular community organizers, I decided to make a redesign of the 16n faderbank following the suggestions and desires of our members. The 16n AtoVproject Rework is the result.

The 16n AtoVproject rework is a complete redesign of the original open source (CC-BY-SA) project 16n faderbank. This project was originated by Brian Crabtree, Sean Hellfritsch, Tom Armitage, Brendon Cassidy. As wished by the original designers the 16n AtoVproject rework is also open source and uses the same CC-BY-SA licence.

Features

  • 16 high-end Alps faders
  • Eurorack compatible (50hp) and standalone enclosure (for use in or out of the rack)
  • Selectable 0-5V or 0-10V CV output range (independent setting for each fader)
  • High stability power conditioning for high stability analog outputs
  • Soft MIDI thru. MIDI data sent to the 16n through USB is echoed to the MIDI jack (Since firmware v2.1.0)
  • Utility connector on the back of the unit to simplify the use of i2c with modules like the ER301

This version of the 16n Faderbank ships with:

  • AtoVproject 16n Rework Eurorack module
  • Enclosure for standalone use (Alumunium Powder coated)
  • USB cable (High quality 1.5m braided and shielded)
  • MIDI din to Jack adapter (90° angled, Type A)
  • Eurorack Power Cable

Dimensions

  • 254 x 135 x 42 mm inside the case
  • 27mm deep under panel in Eurorack power cable

Manufacturer product page here.
Product manual here.

The post AtoVproject 16n Faderbank CV and MIDI Controller (Black) appeared first on Elevator Sound.

]]> Sixty Four Pixels Le Grand Strum Desktop Strummed Chord MIDI Controller https://www.elevatorsound.com/product/sixty-four-pixels-le-grand-strum-desktop-strummed-chord-midi-controller/ Mon, 22 May 2023 17:45:53 +0000 https://www.elevatorsound.com/?post_type=product&p=78956 LE GRAND STRUM is a new version of our popular LE STRUM controller. It comes pre-assembled, in a larger format, with high quality 12mm tactile switches and gold plated strum pads. To play MIDI notes, you hold down one of the chord buttons and touch the tip of the stylus to the strum plate. The contacts on the strum plate are mapped to notes of the chord across multiple octaves and you can create guitar-like strums, massive chord sweeps and arpeggios by moving the stylus across the strum plate. 36 chord buttons give you immediate access to 84 different chords (maj, min, dom7, maj7, min7, aug, dim for 12 root notes). You can also play sus4, add6 and add9 chord variations (with some limitations) The 16 pad, gold plated strum plate has a tapering layout which allows fast chord strums at the top and individual note picking at the bottom. Two new circular strum areas duplicate notes from the main pads and allow you to play continuous arpeggios by moving the stylus in a circular motion. Multiple chord modes are offered, including stacked triads, guitar chord voicing, “drone” chords on second MIDI channel and scale mapping for playing melodies 5 […]

The post Sixty Four Pixels Le Grand Strum Desktop Strummed Chord MIDI Controller appeared first on Elevator Sound.

]]> LE GRAND STRUM is a new version of our popular LE STRUM controller. It comes pre-assembled, in a larger format, with high quality 12mm tactile switches and gold plated strum pads.

To play MIDI notes, you hold down one of the chord buttons and touch the tip of the stylus to the strum plate. The contacts on the strum plate are mapped to notes of the chord across multiple octaves and you can create guitar-like strums, massive chord sweeps and arpeggios by moving the stylus across the strum plate.

  • 36 chord buttons give you immediate access to 84 different chords (maj, min, dom7, maj7, min7, aug, dim for 12 root notes). You can also play sus4, add6 and add9 chord variations (with some limitations)
  • The 16 pad, gold plated strum plate has a tapering layout which allows fast chord strums at the top and individual note picking at the bottom.
  • Two new circular strum areas duplicate notes from the main pads and allow you to play continuous arpeggios by moving the stylus in a circular motion.
  • Multiple chord modes are offered, including stacked triads, guitar chord voicing, “drone” chords on second MIDI channel and scale mapping for playing melodies
  • 5 pin MIDI socket for direct connection MIDI synthesizer hardware or to a computer (Using a suitable MIDI interface/USB-MIDI cable)
  • Long life from a 9V PP3 battery (7mA current draw typical). Battery not included
  • Integral enclosed acrylic base plate with leather stylus holder and acrylic side legs/hand-grips and non-slip rubber feet
  • Open-source hardware and firmware and hackable design – with PCB pads for attaching a second stylus and external pads or strings
  • Approx size – 17 x 12 x 3.5cms. Approx weight – 250g without battery
  • A fun, unique and expressive MIDI controller.Great for learning about chord progressions and a helpful songwriting tool

LE GRAND STRUM shares the same firmware and function with the LE STRUM DIY kit.

Please note that synthesizer hardware or software is required to make sound. LE GRAND STRUM is a MIDI controller and does not make any sound by itself!

Specifications

  • A PP3 battery is required (not included)
  • Integrated ON/OFF switch and power LED
  • 4mm banana plug stylus with keepy-hole in PCB
  • Designed for hackability (e.g. solder wires to the provided holes on the pads to make proper “strings” to pluck)
  • Transmits on MIDI Channel 1 for stylus activity and MIDI Channel 2 for Chord Buttons.
  • Output is to a standard MIDI 5-pin DIN socket.
  • Size 98mm x 75mm x 45mm (incl MIDI socket)
  • Weight approx 120g with battery

Manufacturer product page here.

The post Sixty Four Pixels Le Grand Strum Desktop Strummed Chord MIDI Controller appeared first on Elevator Sound.

]]> Doepfer LMK4+ 88 Key MIDI Keyboard with PSU (No Case) https://www.elevatorsound.com/product/doepfer-lmk4-88-key-midi-keyboard-with-psu-no-case/ Thu, 10 Mar 2022 17:26:49 +0000 https://www.elevatorsound.com/?post_type=product&p=58150 LMK4+ is our most powerful MIDI master keyboard with 8 split zones, 128 memories and a lot of free programmable controllers (2 wheels, 2 sliders, one rotary potentiometer, 2 footcontrol connectors, 2 footswitch connectors, after touch). LMK4+ meets all conditions one would expect from a high-end master keyboard. The MIDI master keyboards of the LMK Plus series have become a household name in the music scene over the last few years. The same high-quality TP/40GH 88-key hammer action keyboard with freely swinging hammers is used in all keyboards in the LMK Plus series. This keyboard meets the highest demands in terms of feel. The LMK plus series of MIDI master keyboards established in the musician scene during the last few years. All keyboards of the LMK-plus series are equipped with the same high quality 88 keys piano-type keyboard TP/40GH with real hammer mechanics. This type of hammer mechanics does not compare to low cost hammer mechanics offered by some competitors (not only a simple metal lever beyond each key). Features High quality keyboard TP/40GH with real piano style action and hammer mechanics, 88 keys Touch dynamics with a maximum of 127 levels, depending on the selected dynamic characteristic Velocity resolution […]

The post Doepfer LMK4+ 88 Key MIDI Keyboard with PSU (No Case) appeared first on Elevator Sound.

]]> LMK4+ is our most powerful MIDI master keyboard with 8 split zones, 128 memories and a lot of free programmable controllers (2 wheels, 2 sliders, one rotary potentiometer, 2 footcontrol connectors, 2 footswitch connectors, after touch). LMK4+ meets all conditions one would expect from a high-end master keyboard.

The MIDI master keyboards of the LMK Plus series have become a household name in the music scene over the last few years. The same high-quality TP/40GH 88-key hammer action keyboard with freely swinging hammers is used in all keyboards in the LMK Plus series. This keyboard meets the highest demands in terms of feel.

The LMK plus series of MIDI master keyboards established in the musician scene during the last few years. All keyboards of the LMK-plus series are equipped with the same high quality 88 keys piano-type keyboard TP/40GH with real hammer mechanics. This type of hammer mechanics does not compare to low cost hammer mechanics offered by some competitors (not only a simple metal lever beyond each key).

Features

  • High quality keyboard TP/40GH with real piano style action and hammer mechanics, 88 keys
  • Touch dynamics with a maximum of 127 levels, depending on the selected dynamic characteristic
  • Velocity resolution max. 127 steps resolution, dependent upon selected velocity curve
  • Adjustable dynamic ratio of black to white keys
  • Adjustable velocity reduction factor for black keys
  • Monophonic aftertouch (channel aftertouch)
  • Illuminated 2-line, 16-digit, blue LC display, contrast and lighting adjustable 2-line, 16-character blue LC display, adjustable backlight/contrast
  • Operation via 24 buttons, 8 of which are menu buttons with blue, rectangular LED displays
  • Operation via 24 buttons grouped in three rows of eight, 8 buttons with blue rectangle LED display

The post Doepfer LMK4+ 88 Key MIDI Keyboard with PSU (No Case) appeared first on Elevator Sound.

]]> Elevator Sound x Big T Music 16n Faderbank CV and MIDI Controller https://www.elevatorsound.com/product/elevator-sound-x-big-t-music-16n-faderbank-cv-and-midi-controller/ Wed, 25 Aug 2021 11:35:30 +0000 https://elevatoruk.wpengine.com/?post_type=product&p=48377 *Made In Bristol!* Elevator Sound x Big T Music collaborate on the FIRST Elevator Sound Edition hardware, we’re kicking things off with a modern classic. The 16n Ele-faderbank, with anodised aluminium panels, Machina green Buchla-style caps and laser etched graphics. Control EVERYTHING and rep your favourite modular store at the same time.. Features 16 smooth as silk Alps 60mm faders. MIDI over USB and/or via 3.5mm TRS for all your DAW and MIDI enabled hardware needs. Configure CC and Channel per channel easily using a handy Chrome based editor. https://16n-faderbank.github.io/editor/ Sixteen CV outs (0-5V) for Eurorack and other hardware controllable via control voltage. Breakout Eurorack module for bipolar and extended CV range coming soon. I2C over 3.5mm TRS featuring a pull up resistor switch to support both I2C configurations (switch left for pull up resistors, right for no pull up resistors). USB cable included.

The post Elevator Sound x Big T Music 16n Faderbank CV and MIDI Controller appeared first on Elevator Sound.

]]> *Made In Bristol!*

Elevator Sound x Big T Music collaborate on the FIRST Elevator Sound Edition hardware, we’re kicking things off with a modern classic. The 16n Ele-faderbank, with anodised aluminium panels, Machina green Buchla-style caps and laser etched graphics. Control EVERYTHING and rep your favourite modular store at the same time..

Features

  • 16 smooth as silk Alps 60mm faders.
  • MIDI over USB and/or via 3.5mm TRS for all your DAW and MIDI enabled hardware needs.
  • Configure CC and Channel per channel easily using a handy Chrome based editor. https://16n-faderbank.github.io/editor/
  • Sixteen CV outs (0-5V) for Eurorack and other hardware controllable via control voltage. Breakout Eurorack module for bipolar and extended CV range coming soon.
  • I2C over 3.5mm TRS featuring a pull up resistor switch to support both I2C configurations (switch left for pull up resistors, right for no pull up resistors).
    USB cable included.

The post Elevator Sound x Big T Music 16n Faderbank CV and MIDI Controller appeared first on Elevator Sound.

]]> Novation Launchkey 25 Mk3 USB/MIDI Keyboard with Arpeggiator https://www.elevatorsound.com/product/novation-launchkey-25mk3-usb-midi-keyboard-with-arpeggiator/ Fri, 21 Aug 2020 16:53:48 +0000 https://elevatoruk.wpengine.com/?post_type=product&p=28813 Launchkey is our intuitive and fully integrated MIDI keyboard controller for making tracks in Ableton Live and with your external equipment. The Launchkey experience is designed for players of all types and abilities. With Launchkey, regardless of experience, you can create and play your music like never before. With its various musical creation features, all of which can be used standalone, Launchkey removes barriers to creativity, and expands the musical vocabulary of even the most talented keyboardists. Custom Modes simplify the relationship between controller and software, with more power than ever in your hands. Programmable using the Novation Components browser-based tool, Custom Modes let you design the behaviour of your Launchkey, with control over control assignments, MIDI routing, pad colour and much more. Launchkey 25 is equipped with a full-size five-pin MIDI DIN output, enabling simple connection to the universe of MIDI devices — new and old. Coupled with its immense standalone potential, Launchkey is now the centrepiece to your live or studio rig — computer or not. The Launchkey platform has always been about flexibility, and the MK3 revision carries this mantra at its core. Larger, improved velocity-sensitive pads provide greater control over dynamics, and eight fixed rotary knobs […]

The post Novation Launchkey 25 Mk3 USB/MIDI Keyboard with Arpeggiator appeared first on Elevator Sound.

]]> Launchkey is our intuitive and fully integrated MIDI keyboard controller for making tracks in Ableton Live and with your external equipment. The Launchkey experience is designed for players of all types and abilities. With Launchkey, regardless of experience, you can create and play your music like never before. With its various musical creation features, all of which can be used standalone, Launchkey removes barriers to creativity, and expands the musical vocabulary of even the most talented keyboardists.

Custom Modes simplify the relationship between controller and software, with more power than ever in your hands. Programmable using the Novation Components browser-based tool, Custom Modes let you design the behaviour of your Launchkey, with control over control assignments, MIDI routing, pad colour and much more.

Launchkey 25 is equipped with a full-size five-pin MIDI DIN output, enabling simple connection to the universe of MIDI devices — new and old. Coupled with its immense standalone potential, Launchkey is now the centrepiece to your live or studio rig — computer or not.

The Launchkey platform has always been about flexibility, and the MK3 revision carries this mantra at its core. Larger, improved velocity-sensitive pads provide greater control over dynamics, and eight fixed rotary knobs bring your software to life at your fingertips. The integration with Ableton Live is truly seamless, with a dedicated button for activating the Capture MIDI function, plus track arm, quantise, click and loop controls, for flying around your Session faster than ever.

Features

  • Velocity-sensitive keyboard and 16 velocity-sensitive pads enable expressive and dynamic performance.
  • Three chord modes (fixed, scale and user) let you trigger chords with one finger.
  • Scale modes transpose keys and pads to notes in the selected scale.
  • Powerful arpeggiator takes you to new melodic, harmonic and rhythmic places.
  • Five-pin MIDI output works with any MIDI-compatible device.
  • Easy-to-read screen – 16×2 character screen lets you easily see the state of what you’re controlling or selecting.
  • Free software, including Ableton Live 10 Lite, virtual instruments, plugins and sample packs let you start creating straight away.
  • Four Custom Modes enable you to create unique control setups for any performance or studio rig, using Novation Components.

The post Novation Launchkey 25 Mk3 USB/MIDI Keyboard with Arpeggiator appeared first on Elevator Sound.

]]> Arturia Keystep 37 Hardware MIDI/CV Keyboard Controller (White) https://www.elevatorsound.com/product/arturia-keystep-37-hardware-midi-cv-keyboard-controller/ Mon, 14 Sep 2020 18:31:25 +0000 https://elevatoruk.wpengine.com/?post_type=product&p=29746 A controller, evolved. KeyStep 37 combines a flexible 37-note keyboard with intuitive sequencing, instant chord generation and creative real-time MIDI controls that let you discover and interact with music like never before. KeyStep 37’s unique & enhanced Chord mode takes your single note melodies and unfinished ideas and transforms them into musical stepping stones. Choose from multiple voicings, instrument-like strum effects, and velocity settings and make your music really sing. Map out KeyStep 37’s 3-octave keyboard range with a scale of your choice using Scale mode. Any key you play will automatically quantize to the nearest note in the chosen scale – never play a wrong note again. The same velocity-sensitive 37-note keybed as the KeyStep Pro, complete with aftertouch and RGB LED feedback. A lightweight and compact keyboard that offers full and familiar creative flexibility, whatever your style or ability. At the center of KeyStep 37’s interface we’ve added 4 new control knobs with a screen, giving you instant access to inspiring new expressive tools and MIDI tweaking – total control. Main Features Slimkey keybed with velocity and aftertouch RGB LEDs on each key for instant feedback on your sequence, arp, scale Arpeggiator mode: Up, Down, Inclusive, Exclusive, Random, […]

The post Arturia Keystep 37 Hardware MIDI/CV Keyboard Controller (White) appeared first on Elevator Sound.

]]> A controller, evolved. KeyStep 37 combines a flexible 37-note keyboard with intuitive sequencing, instant chord generation and creative real-time MIDI controls that let you discover and interact with music like never before.

KeyStep 37’s unique & enhanced Chord mode takes your single note melodies and unfinished ideas and transforms them into musical stepping stones. Choose from multiple voicings, instrument-like strum effects, and velocity settings and make your music really sing. Map out KeyStep 37’s 3-octave keyboard range with a scale of your choice using Scale mode. Any key you play will automatically quantize to the nearest note in the chosen scale – never play a wrong note again.

The same velocity-sensitive 37-note keybed as the KeyStep Pro, complete with aftertouch and RGB LED feedback. A lightweight and compact keyboard that offers full and familiar creative flexibility, whatever your style or ability. At the center of KeyStep 37’s interface we’ve added 4 new control knobs with a screen, giving you instant access to inspiring new expressive tools and MIDI tweaking – total control.

Main Features

  • Slimkey keybed with velocity and aftertouch
  • RGB LEDs on each key for instant feedback on your sequence, arp, scale
  • Arpeggiator mode: Up, Down, Inclusive, Exclusive, Random, Walk, Pattern and Order
  • Sequencer mode: 8 polyphonic step-sequences with Rest, Tie, and Legato note entry
  • Rate control and tap tempo: REC, PLAY, and STOP buttons for performance control over the sequencer and arpeggiator
  • Advanced Chord mode with pre-defined or user Chords and strumming capability
  • SHIFT button selection : MIDI Channel selection, Gate length, Swing, Sequence Edit, Scale quantization, CC Bank selection
  • DC power jack for standalone operation
  • USB MIDI and MIDI in/out ports
  • CV Sync I/O ports
  • Sync source switch : Internal, USB, MIDI, Clock
  • CV/Gate outputs with configurable pitch, gate and Modulation formats.
  • Capacitive pitch bend and mod wheel strips
  • Each sequence can have 64 steps with 8 notes of polyphony

The post Arturia Keystep 37 Hardware MIDI/CV Keyboard Controller (White) appeared first on Elevator Sound.

]]> Arturia Keystep Pro Hardware Polyphonic Sequencer (Black) https://www.elevatorsound.com/product/arturia-keystep-pro-hardware-polyphonic-sequencer-black/ Wed, 07 Jul 2021 16:00:24 +0000 https://elevatoruk.wpengine.com/?post_type=product&p=46131 It’s the sequencer you’ve all been asking for! KeyStep Pro is a 37-key MIDI controller and multi-channel polyphonic sequencer all in one. It will allow musicians to take full control of their modular rigs, outboard synths, and software studio all at the same time. The 4 independent polyphonic sequencer tracks give you full control over your instruments, and Track 1 can also function as a 16-part integrated drum sequencer. It’s incredibly intuitive, has unparalleled connectivity, and promises to make even complex performances a breeze. Features: 37 note slim keys, velocity and aftertouch sensitivewith LED above each key for efficient visual feedback Four track step sequencerwith 16 step buttons, up to 64 steps per sequence Up to 16 notes of polyphony per step-Melodic sequencerwith Real-Time recording, step recording, step editing Pitch, velocity, gate length, time shift and probability for each note-Scale quantization with user scales Polyphonic CV outputs-24 part drum sequencer with Polyrhythm Performance-oriented sequencer with Forward and two random playing modes, Pattern randomization, Quantized or unquantized recording, and Looping Arpeggiator: 7 arpeggiator modes, 5 octave range Chord mode/Controller mode: Use the 5 encoders to send CCs and automate the CCs Crisp OLED display-4x (CV, Gate, Mod) outputs + 8 drum […]

The post Arturia Keystep Pro Hardware Polyphonic Sequencer (Black) appeared first on Elevator Sound.

]]> It’s the sequencer you’ve all been asking for! KeyStep Pro is a 37-key MIDI controller and multi-channel polyphonic sequencer all in one. It will allow musicians to take full control of their modular rigs, outboard synths, and software studio all at the same time.

The 4 independent polyphonic sequencer tracks give you full control over your instruments, and Track 1 can also function as a 16-part integrated drum sequencer. It’s incredibly intuitive, has unparalleled connectivity, and promises to make even complex performances a breeze.

Features:

  • 37 note slim keys, velocity and aftertouch sensitivewith LED above each key for efficient visual feedback
  • Four track step sequencerwith 16 step buttons, up to 64 steps per sequence
  • Up to 16 notes of polyphony per step-Melodic sequencerwith Real-Time recording, step recording, step editing
  • Pitch, velocity, gate length, time shift and probability for each note-Scale quantization with user scales
  • Polyphonic CV outputs-24 part drum sequencer with Polyrhythm
  • Performance-oriented sequencer with Forward and two random playing modes, Pattern randomization, Quantized or unquantized recording, and Looping
  • Arpeggiator: 7 arpeggiator modes, 5 octave range
  • Chord mode/Controller mode: Use the 5 encoders to send CCs and automate the CCs
  • Crisp OLED display-4x (CV, Gate, Mod) outputs + 8 drum gate outputs-1 MIDI in, 2 MIDI out, USB, Clock synchronization
  • Metronome with included speaker and line output

Product size: 589 x 209 x 38 mm / 23.19 x 8.23 x 1.496 inches
Net weight: 2.7 kg / 5.95 lbs

The post Arturia Keystep Pro Hardware Polyphonic Sequencer (Black) appeared first on Elevator Sound.

]]> Novation Launchpad Pro Mk3 MIDI Controller and Standalone Sequencer https://www.elevatorsound.com/product/novation-launchpad-pro-mk3-midi-controller-and-standalone-sequencer/ Tue, 14 Jan 2020 17:04:33 +0000 https://elevatoruk.wpengine.com/?post_type=product&p=23940 Launchpad Pro is made to produce. As Novation’s most powerful grid controller for making music in Ableton Live and with hardware, it gives you everything you need to create and perform your tracks. Launchpad Pro has Novation’s deepest Ableton Live integration yet. Launch clips and scenes, access mixer, device and transport controls, and quantise, duplicate and double, all without touching your mouse. One-click access to Ableton Live’s Capture MIDI function makes sure you never miss an idea. Keep your tracks evolving with the four-track, eight-note polyphonic, 32-step standalone sequencer. Sequence virtual instruments and instantly print patterns to Clips in Ableton Live. Or hook up your favourite hardware to play patterns via MIDI — Launchpad Pro integrates seamlessly. Micro Steps take grooves off-grid. Probability, Mutation, Sync Rate and Play Order let you transform your patterns on the fly. Patterns can be chained together and assigned to Scenes to build complete songs. Launchpad Pro is the most playable Launchpad yet. Its velocity- and pressure-sensitive pads are bigger and more responsive than ever — perfect for playing grooves and launching clips. Scale mode locks pads to a musical key so you never hit a wrong note. Chord mode is an inspirational tool for […]

The post Novation Launchpad Pro Mk3 MIDI Controller and Standalone Sequencer appeared first on Elevator Sound.

]]> Launchpad Pro is made to produce. As Novation’s most powerful grid controller for making music in Ableton Live and with hardware, it gives you everything you need to create and perform your tracks. Launchpad Pro has Novation’s deepest Ableton Live integration yet. Launch clips and scenes, access mixer, device and transport controls, and quantise, duplicate and double, all without touching your mouse. One-click access to Ableton Live’s Capture MIDI function makes sure you never miss an idea.

Keep your tracks evolving with the four-track, eight-note polyphonic, 32-step standalone sequencer. Sequence virtual instruments and instantly print patterns to Clips in Ableton Live. Or hook up your favourite hardware to play patterns via MIDI — Launchpad Pro integrates seamlessly. Micro Steps take grooves off-grid. Probability, Mutation, Sync Rate and Play Order let you transform your patterns on the fly. Patterns can be chained together and assigned to Scenes to build complete songs.

Launchpad Pro is the most playable Launchpad yet. Its velocity- and pressure-sensitive pads are bigger and more responsive than ever — perfect for playing grooves and launching clips. Scale mode locks pads to a musical key so you never hit a wrong note. Chord mode is an inspirational tool for building harmonies.

Custom Modes transform Launchpad Pro into a hands-on control surface for any MIDI-compatible software or hardware, so you can design the perfect controller for your live setup, and perform with all your gear, however you want. Simply drag and drop widgets in Novation Components to configure the layout, then store configurations as one of eight Custom Modes. Disconnect the computer (if you want to), then switch between Modes for expressive and creative control of anything MIDI.

Launchpad Pro is your music-making creativity hub, with or without a computer. Hook Launchpad Pro into an all-hardware rig using MIDI In, Out and Out 2/Thru ports on 3.5mm connectors. By no means least is the Easy Start Tool, which tailors the configuration process to your setup so you can start producing music as quickly as possible.

Key Features

  • Our Deepest Ableton Live Integration — Launch clips and scenes, access mixer, device and transport controls, and quantise, duplicate and double, all without touching your mouse.
  • 64 Super-sensitive RGB Pads — Large RGB velocity- and pressure-sensitive pads give you a perfect reflection of your Ableton Live session, making it easier than ever to see your clips and play your instruments dynamically and expressively.
  • Powerful Four-track, 32-step Sequencer — Create full tracks with Launchpad Pro’s built-in sequencer, featuring eight-note polyphony, pattern chaining and scenes to create and trigger longer sequences, and probability and mutation controls to keep your tracks evolving.
  • Chord Mode — Easily explore, build and play complex chords straight from the grid; quickly find new harmonies.
  • Dynamic Note & Scale Modes — Effortlessly play perfectly in-key basslines, melodies, chords and leads. Launchpad Pro even knows when you’re drumming and shows your drum rack on the grid.
  • MIDI In, Out & Out 2/Thru — Control anything MIDI in your studio directly from Launchpad Pro.
  • Capture MIDI — Never lose ideas and happy accidents with on-device access to Ableton Live’s Capture MIDI function.
  • Eight Custom Modes — Use Novation Components to customise mappings and control anything MIDI easily from Launchpad Pro.
  • Grab And Go — Sleek, lightweight and tough, and USB-C bus-powered.
  • Get Started Easily — Use our Easy Start Tool to get all the software you want, and step-by-step video guides to get you set up with Live and making music in minutes.

What’s In The Box

  • Launchpad Pro
  • USB-A to USB-C Cable
  • USB-C to USB-C Cable
  • USB-A Power Adapter
  • 3x TRS Minijack to DIN MIDI Adapters
  • Safety information sheet

Technical Specifications

  • 64 velocity- and pressure-sensitive pads
  • 42 backlit tactile feedback buttons
  • 106 RGB LEDs
  • USB-C socket
  • Kensington MiniSaver slot

Software Compatibility
Ableton Live 10 Lite is included
If you already have Ableton Live it must be version 10 or greater to work with Launchpad Pro. We recommend that you update to the latest version, as previous versions of Ableton Live do not include Launchpad Pro integration with Live. Launchpad Pro will also work as a standard MIDI controller.

Power Requirements
USB power supply included for standalone operation.

The post Novation Launchpad Pro Mk3 MIDI Controller and Standalone Sequencer appeared first on Elevator Sound.

]]>