Mixer Controllers Archives - Elevator Sound https://www.elevatorsound.com/product-category/controllers/mixer-controllers/ Eurorack Modular, Synthesizer & Electronic Music Hardware Store Sat, 28 Sep 2024 12:52:09 +0000 en-GB hourly 1 https://wordpress.org/?v=6.7.1 AtoVproject 16n Faderbank CV and MIDI Controller (Silver) https://www.elevatorsound.com/product/atovproject-16n-faderbank-cv-and-midi-controller-silver/ Mon, 31 Jul 2023 15:08:28 +0000 https://www.elevatorsound.com/?post_type=product&p=81496 The 16n AtoVproject Rework is aimed at solving a problem very specific to modular synthesis. As a patch is getting more and more complex a forest of cables has grown over your system before you know it. This module allows you to take the control from the modular into a very ergonomic controller that integrates perfectly into a modern studio. The 16n AtoVproject Rework is a controller sending CV, I2C, MIDI jack, USB MIDI (compatible PC, Mac, iPad etc…), making it the absolute ultimate controller for any of your hardware and software all in one! Even better this controller can either be used as a Eurorack module or as a standalone unit using the beautiful aluminum enclosure. In 2019, the Berlin Modular community showed interest in building the 16n Faderbank. As one of the Berlin Modular community organizers, I decided to make a redesign of the 16n faderbank following the suggestions and desires of our members. The 16n AtoVproject Rework is the result. The 16n AtoVproject rework is a complete redesign of the original open source (CC-BY-SA) project 16n faderbank. This project was originated by Brian Crabtree, Sean Hellfritsch, Tom Armitage, Brendon Cassidy. As wished by the original designers the […]

The post AtoVproject 16n Faderbank CV and MIDI Controller (Silver) appeared first on Elevator Sound.

]]> The 16n AtoVproject Rework is aimed at solving a problem very specific to modular synthesis. As a patch is getting more and more complex a forest of cables has grown over your system before you know it. This module allows you to take the control from the modular into a very ergonomic controller that integrates perfectly into a modern studio.

The 16n AtoVproject Rework is a controller sending CV, I2C, MIDI jack, USB MIDI (compatible PC, Mac, iPad etc…), making it the absolute ultimate controller for any of your hardware and software all in one!

Even better this controller can either be used as a Eurorack module or as a standalone unit using the beautiful aluminum enclosure.

In 2019, the Berlin Modular community showed interest in building the 16n Faderbank. As one of the Berlin Modular community organizers, I decided to make a redesign of the 16n faderbank following the suggestions and desires of our members. The 16n AtoVproject Rework is the result.

The 16n AtoVproject rework is a complete redesign of the original open source (CC-BY-SA) project 16n faderbank. This project was originated by Brian Crabtree, Sean Hellfritsch, Tom Armitage, Brendon Cassidy. As wished by the original designers the 16n AtoVproject rework is also open source and uses the same CC-BY-SA licence.

Features

  • 16 high-end Alps faders
  • Eurorack compatible (50hp) and standalone enclosure (for use in or out of the rack)
  • Selectable 0-5V or 0-10V CV output range (independent setting for each fader)
  • High stability power conditioning for high stability analog outputs
  • Soft MIDI thru. MIDI data sent to the 16n through USB is echoed to the MIDI jack (Since firmware v2.1.0)
  • Utility connector on the back of the unit to simplify the use of i2c with modules like the ER301

This version of the 16n Faderbank ships with:

  • AtoVproject 16n Rework Eurorack module
  • Enclosure for standalone use (Alumunium Powder coated)
  • USB cable (High quality 1.5m braided and shielded)
  • MIDI din to Jack adapter (90° angled, Type A)
  • Eurorack Power Cable

Dimensions

  • 254 x 135 x 42 mm inside the case
  • 27mm deep under panel in Eurorack power cable

Manufacturer product page here.
Product manual here.

The post AtoVproject 16n Faderbank CV and MIDI Controller (Silver) appeared first on Elevator Sound.

]]> AtoVproject 16n Faderbank CV and MIDI Controller (Black) https://www.elevatorsound.com/product/atovproject-16n-faderbank-cv-and-midi-controller-black/ Mon, 31 Jul 2023 15:07:51 +0000 https://www.elevatorsound.com/?post_type=product&p=81491 The 16n AtoVproject Rework is aimed at solving a problem very specific to modular synthesis. As a patch is getting more and more complex a forest of cables has grown over your system before you know it. This module allows you to take the control from the modular into a very ergonomic controller that integrates perfectly into a modern studio. The 16n AtoVproject Rework is a controller sending CV, I2C, MIDI jack, USB MIDI (compatible PC, Mac, iPad etc…), making it the absolute ultimate controller for any of your hardware and software all in one! Even better this controller can either be used as a Eurorack module or as a standalone unit using the beautiful aluminum enclosure. In 2019, the Berlin Modular community showed interest in building the 16n Faderbank. As one of the Berlin Modular community organizers, I decided to make a redesign of the 16n faderbank following the suggestions and desires of our members. The 16n AtoVproject Rework is the result. The 16n AtoVproject rework is a complete redesign of the original open source (CC-BY-SA) project 16n faderbank. This project was originated by Brian Crabtree, Sean Hellfritsch, Tom Armitage, Brendon Cassidy. As wished by the original designers the […]

The post AtoVproject 16n Faderbank CV and MIDI Controller (Black) appeared first on Elevator Sound.

]]> The 16n AtoVproject Rework is aimed at solving a problem very specific to modular synthesis. As a patch is getting more and more complex a forest of cables has grown over your system before you know it. This module allows you to take the control from the modular into a very ergonomic controller that integrates perfectly into a modern studio.

The 16n AtoVproject Rework is a controller sending CV, I2C, MIDI jack, USB MIDI (compatible PC, Mac, iPad etc…), making it the absolute ultimate controller for any of your hardware and software all in one!

Even better this controller can either be used as a Eurorack module or as a standalone unit using the beautiful aluminum enclosure.

In 2019, the Berlin Modular community showed interest in building the 16n Faderbank. As one of the Berlin Modular community organizers, I decided to make a redesign of the 16n faderbank following the suggestions and desires of our members. The 16n AtoVproject Rework is the result.

The 16n AtoVproject rework is a complete redesign of the original open source (CC-BY-SA) project 16n faderbank. This project was originated by Brian Crabtree, Sean Hellfritsch, Tom Armitage, Brendon Cassidy. As wished by the original designers the 16n AtoVproject rework is also open source and uses the same CC-BY-SA licence.

Features

  • 16 high-end Alps faders
  • Eurorack compatible (50hp) and standalone enclosure (for use in or out of the rack)
  • Selectable 0-5V or 0-10V CV output range (independent setting for each fader)
  • High stability power conditioning for high stability analog outputs
  • Soft MIDI thru. MIDI data sent to the 16n through USB is echoed to the MIDI jack (Since firmware v2.1.0)
  • Utility connector on the back of the unit to simplify the use of i2c with modules like the ER301

This version of the 16n Faderbank ships with:

  • AtoVproject 16n Rework Eurorack module
  • Enclosure for standalone use (Alumunium Powder coated)
  • USB cable (High quality 1.5m braided and shielded)
  • MIDI din to Jack adapter (90° angled, Type A)
  • Eurorack Power Cable

Dimensions

  • 254 x 135 x 42 mm inside the case
  • 27mm deep under panel in Eurorack power cable

Manufacturer product page here.
Product manual here.

The post AtoVproject 16n Faderbank CV and MIDI Controller (Black) appeared first on Elevator Sound.

]]> Elevator Sound x Big T Music 16n Faderbank CV and MIDI Controller https://www.elevatorsound.com/product/elevator-sound-x-big-t-music-16n-faderbank-cv-and-midi-controller/ Wed, 25 Aug 2021 11:35:30 +0000 https://elevatoruk.wpengine.com/?post_type=product&p=48377 *Made In Bristol!* Elevator Sound x Big T Music collaborate on the FIRST Elevator Sound Edition hardware, we’re kicking things off with a modern classic. The 16n Ele-faderbank, with anodised aluminium panels, Machina green Buchla-style caps and laser etched graphics. Control EVERYTHING and rep your favourite modular store at the same time.. Features 16 smooth as silk Alps 60mm faders. MIDI over USB and/or via 3.5mm TRS for all your DAW and MIDI enabled hardware needs. Configure CC and Channel per channel easily using a handy Chrome based editor. https://16n-faderbank.github.io/editor/ Sixteen CV outs (0-5V) for Eurorack and other hardware controllable via control voltage. Breakout Eurorack module for bipolar and extended CV range coming soon. I2C over 3.5mm TRS featuring a pull up resistor switch to support both I2C configurations (switch left for pull up resistors, right for no pull up resistors). USB cable included.

The post Elevator Sound x Big T Music 16n Faderbank CV and MIDI Controller appeared first on Elevator Sound.

]]> *Made In Bristol!*

Elevator Sound x Big T Music collaborate on the FIRST Elevator Sound Edition hardware, we’re kicking things off with a modern classic. The 16n Ele-faderbank, with anodised aluminium panels, Machina green Buchla-style caps and laser etched graphics. Control EVERYTHING and rep your favourite modular store at the same time..

Features

  • 16 smooth as silk Alps 60mm faders.
  • MIDI over USB and/or via 3.5mm TRS for all your DAW and MIDI enabled hardware needs.
  • Configure CC and Channel per channel easily using a handy Chrome based editor. https://16n-faderbank.github.io/editor/
  • Sixteen CV outs (0-5V) for Eurorack and other hardware controllable via control voltage. Breakout Eurorack module for bipolar and extended CV range coming soon.
  • I2C over 3.5mm TRS featuring a pull up resistor switch to support both I2C configurations (switch left for pull up resistors, right for no pull up resistors).
    USB cable included.

The post Elevator Sound x Big T Music 16n Faderbank CV and MIDI Controller appeared first on Elevator Sound.

]]>