Studio & Stage Archives - Elevator Sound https://www.elevatorsound.com/product-category/studio-and-stage/ Eurorack Modular, Synthesizer & Electronic Music Hardware Store Wed, 04 Dec 2024 18:49:39 +0000 en-GB hourly 1 https://wordpress.org/?v=6.7.1 Teenage Engineering CM-15 Portable Condenser Microphone https://www.elevatorsound.com/product/teenage-engineering-cm-15-portable-condenser-microphone/ Fri, 20 Sep 2024 15:10:41 +0000 https://www.elevatorsound.com/?post_type=product&p=93572 A tiny studio microphone with a large-diaphragm capsule and groundbreaking features. Teenage Engineering call it CM–15. the latest addition to their field system™. a versatile studio quality, ultra-portable microphone that comes with an integrated audio converter and built-in preamp. Add a 3.5mm jack and a 48v phantom powered mini xlr, and you have a truly one-of-a-kind battery-powered studio microphone. Large-diaphragm capsules are preferred for professional recording, but are rare within the world of portable equipment. CM–15 features an ESS sabre analog-to-digital converter, preserving high-fidelity sound and capturing exceptional detail in any recording situation. Clean, rich, transparent and natural sound. period. Use the gain switch on the back for padding those mean drums, or the other way around. battery-powered with an integrated high-quality audio converter and preamp, CM–15 is always ready to use wherever you like to record. in other words: ’lean operation’. CM–15 has multiple outputs that can be used simultaneously: mini xlr, 3.5 mm jack and usb-c. it can also be powered three ways, through phantom power, battery or usb-c, instantly detecting the right power source for your connected device. Features 1-inch large-diaphragm capsule 10 hour rechargeable battery 48 V phantom power compatible pseudo-balanced mini xlr output dual mono […]

The post Teenage Engineering CM-15 Portable Condenser Microphone appeared first on Elevator Sound.

]]> A tiny studio microphone with a large-diaphragm capsule and groundbreaking features. Teenage Engineering call it CM–15. the latest addition to their field system™.
a versatile studio quality, ultra-portable microphone that comes with an integrated audio converter and built-in preamp. Add a 3.5mm jack and a 48v phantom powered mini xlr, and you have a truly one-of-a-kind battery-powered studio microphone. Large-diaphragm capsules are preferred for professional recording, but are rare within the world of portable equipment. CM–15 features an ESS sabre analog-to-digital converter, preserving high-fidelity sound and capturing exceptional detail in any recording situation.

Clean, rich, transparent and natural sound. period. Use the gain switch on the back for padding those mean drums, or the other way around. battery-powered with an integrated high-quality audio converter and preamp, CM–15 is always ready to use wherever you like to record. in other words: ’lean operation’.

CM–15 has multiple outputs that can be used simultaneously: mini xlr, 3.5 mm jack and usb-c. it can also be powered three ways, through phantom power, battery or usb-c, instantly detecting the right power source for your connected device.

Features

  • 1-inch large-diaphragm capsule
  • 10 hour rechargeable battery
  • 48 V phantom power compatible pseudo-balanced mini xlr output
  • dual mono 3.5 mm jack line output
  • usb-c class compliant device with high performance
  • ESS sabre ES9822Q PRO analog to digital converter

dimensions and weight

  • 90 mm x 65.5 mm x 19 mm
  • 132 g / 4.65 oz

audio characteristics

  • self noise: 14 dBA
  • max SPL for 0.5% THD: 138 dB
  • USB SNR dBA FS: 120 dB
  • polar pattern: supercardioid (variable)
  • polarity: positive

The post Teenage Engineering CM-15 Portable Condenser Microphone appeared first on Elevator Sound.

]]> Oaka Instruments Verdi High Fidelity Condenser Microphone (Pair) https://www.elevatorsound.com/product/oaka-instruments-verdi-high-fidelity-condenser-microphone-pair/ Mon, 01 Jul 2024 12:43:27 +0000 https://www.elevatorsound.com/?post_type=product&p=91687 Verdi are a pair of small, phantom powered condenser microphones designed for field recording and sound design. These microphones are specially designed for recording subtle, delicate sounds but also work well as a stereo pair recording atmospheres and environments. The microphones have been created using high quality electronics and durable, all metal aluminum casings. The clips are made from recyclable plant based plastics. These microphones and accessories are hand made at the Oaka workshop in Dorset, UK In The Box x2 Verdi omnidirectional microphones. (Matched to no more than 0.5dB difference) x2 Microphone clips made from highly durable SLS plastic x2 2m Microphone cables Spec Polar pattern – Omnidirectional Sensitivity–28dB ±3dB at 1kHz S/NRatio:80dB at 1kHz Operating voltage – 24 – 48v Phantom Power Size (not including connector) – Length 54mm Diameter 12mm Please note: Size may vary by small amounts as the items are hand made.

The post Oaka Instruments Verdi High Fidelity Condenser Microphone (Pair) appeared first on Elevator Sound.

]]> Verdi are a pair of small, phantom powered condenser microphones designed for field recording and sound design. These microphones are specially designed for recording subtle, delicate sounds but also work well as a stereo pair recording atmospheres and environments.

The microphones have been created using high quality electronics and durable, all metal aluminum casings. The clips are made from recyclable plant based plastics.

These microphones and accessories are hand made at the Oaka workshop in Dorset, UK

In The Box

  • x2 Verdi omnidirectional microphones. (Matched to no more than 0.5dB difference)
  • x2 Microphone clips made from highly durable SLS plastic
  • x2 2m Microphone cables

Spec

  • Polar pattern – Omnidirectional
  • Sensitivity–28dB ±3dB at 1kHz
  • S/NRatio:80dB at 1kHz
  • Operating voltage – 24 – 48v Phantom Power
  • Size (not including connector) –
  • Length 54mm
  • Diameter 12mm
  • Please note: Size may vary by small amounts as the items are hand made.

The post Oaka Instruments Verdi High Fidelity Condenser Microphone (Pair) appeared first on Elevator Sound.

]]> Oaka Microphones MINI Verdi High Fidelity Compact Condenser Microphone (Pair) https://www.elevatorsound.com/product/oaka-microphones-miniverdi-high-fidelity-compact-condenser-microphone-pair/ Mon, 01 Jul 2024 13:21:46 +0000 https://www.elevatorsound.com/?post_type=product&p=91705 MINI Verdi are a matched pair of sensitive microphones designed for field recording and sound design. They are an ideal upgrade to handheld recorders which feature a 3.5mm plug-in powered input. They are capable of recording tiny, microscopic sounds but also work well as a stereo pair for wide intriguing atmospheres and soundscapes. They are ideal for recording delicate sounds but also their compact size makes them ideal for smaller rigs and tight recording situations. The microphone enclosures are machined and finished in house. They are all metal enclosures and finished with a highly durable matt black paint. In The Box x2 MINI Verdi Microphones Spec Polar pattern – Omnidirectional Sensitivity – -28 dB ± 3 dB at 1 kHz S/N Ratio: 80 dB at 1 kHz Operating voltage – 5v plugin power Length 20mm Diameter 12.7mm Please note: Size may vary by small amounts as the items are hand made.

The post Oaka Microphones MINI Verdi High Fidelity Compact Condenser Microphone (Pair) appeared first on Elevator Sound.

]]> MINI Verdi are a matched pair of sensitive microphones designed for field recording and sound design. They are an ideal upgrade to handheld recorders which feature a 3.5mm plug-in powered input. They are capable of recording tiny, microscopic sounds but also work well as a stereo pair for wide intriguing atmospheres and soundscapes.

They are ideal for recording delicate sounds but also their compact size makes them ideal for smaller rigs and tight recording situations.

The microphone enclosures are machined and finished in house. They are all metal enclosures and finished with a highly durable matt black paint.

In The Box

  • x2 MINI Verdi Microphones

Spec

  • Polar pattern – Omnidirectional
  • Sensitivity – -28 dB ± 3 dB at 1 kHz
  • S/N Ratio: 80 dB at 1 kHz
  • Operating voltage – 5v plugin power
  • Length 20mm
  • Diameter 12.7mm
  • Please note: Size may vary by small amounts as the items are hand made.

The post Oaka Microphones MINI Verdi High Fidelity Compact Condenser Microphone (Pair) appeared first on Elevator Sound.

]]> Oaka Instruments Tellus High Fidelity Active Contact Microphone (Weatherised) https://www.elevatorsound.com/product/oaka-instruments-tellus-high-fidelity-active-contact-microphone-weatherised/ Mon, 01 Jul 2024 13:05:57 +0000 https://www.elevatorsound.com/?post_type=product&p=91703 Tellus is a contact microphone with high sensitivity. It enables the listener to examine subtle sonic activity which would usually be hidden from our audible world. The microphone encourages listening to the very small and enlarging the unheard, bringing unusual and experimental sonic activity into our domain. A water resistant, weatherised version of Tellus. Designed for use in the field in wet conditions the microphone features a waterproof cable gland to keep moisture out. It is the largest of the three variants. The idea behind this version is that it will be used for listening to the natural world, like trees, soil and sand. The microphone achieves this with a carefully constructed piezo element especially designed for this particular microphone. The microphone also features an internal preamp. Because of the internal preamp, this microphone requires 24-48v Phantom power. The microphones are designed, hand-built and tested at the Oaka workshop in Dorset, UK. Spec Height – 20mm Diameter – 40mm Operating voltage – 24 – 48v Phantom Power Rean Male XLR connector The microphone body is made from a highly durable plastic with a specially designed brass pickup element. The microphone can is water resistant but is not designed to be […]

The post Oaka Instruments Tellus High Fidelity Active Contact Microphone (Weatherised) appeared first on Elevator Sound.

]]> Tellus is a contact microphone with high sensitivity. It enables the listener to examine subtle sonic activity which would usually be hidden from our audible world. The microphone encourages listening to the very small and enlarging the unheard, bringing unusual and experimental sonic activity into our domain.

A water resistant, weatherised version of Tellus. Designed for use in the field in wet conditions the microphone features a waterproof cable gland to keep moisture out. It is the largest of the three variants. The idea behind this version is that it will be used for listening to the natural world, like trees, soil and sand.

The microphone achieves this with a carefully constructed piezo element especially designed for this particular microphone. The microphone also features an internal preamp.

Because of the internal preamp, this microphone requires 24-48v Phantom power.

The microphones are designed, hand-built and tested at the Oaka workshop in Dorset, UK.

Spec

  • Height – 20mm
  • Diameter – 40mm
  • Operating voltage – 24 – 48v Phantom Power
  • Rean Male XLR connector
  • The microphone body is made from a highly durable plastic with a specially designed brass pickup element. The microphone can is water resistant but is not designed to be fully submerged in water.

The post Oaka Instruments Tellus High Fidelity Active Contact Microphone (Weatherised) appeared first on Elevator Sound.

]]> Oaka Instruments Tellus High Fidelity Active Contact Microphone (Miniature) https://www.elevatorsound.com/product/oaka-instruments-tellus-high-fidelity-active-contact-microphone-miniature/ Mon, 01 Jul 2024 12:56:38 +0000 https://www.elevatorsound.com/?post_type=product&p=91696 Tellus is a contact microphone with high sensitivity. It enables the listener to examine subtle sonic activity which would usually be hidden from our audible world. The microphone encourages listening to the very small and enlarging the unheard, bringing unusual and experimental sonic activity into our domain. Miniature is small form version of Tellus, achieved by putting the active circuitry inside the XLR connector. This microphone is ideal for attaching to acoustic instruments. The element is lightweight and really thin making attachment to surfaces easy. The element is not weatherised so not ideal for situations where the microphone might get wet. The microphone achieves this with a carefully constructed piezo element especially designed for this particular microphone. The microphone also features an internal preamp. Because of the internal preamp, this microphone requires 24-48v Phantom power. The microphones are designed, hand-built and tested at the Oaka workshop in Dorset, UK. Spec Height – 10mm Diameter – 38mm Operating voltage – 24 – 48v Phantom Power Rean Male XLR connector The microphone body is made from a highly durable plastic with a specially designed brass pickup element.

The post Oaka Instruments Tellus High Fidelity Active Contact Microphone (Miniature) appeared first on Elevator Sound.

]]> Tellus is a contact microphone with high sensitivity. It enables the listener to examine subtle sonic activity which would usually be hidden from our audible world. The microphone encourages listening to the very small and enlarging the unheard, bringing unusual and experimental sonic activity into our domain.

Miniature is small form version of Tellus, achieved by putting the active circuitry inside the XLR connector. This microphone is ideal for attaching to acoustic instruments. The element is lightweight and really thin making attachment to surfaces easy. The element is not weatherised so not ideal for situations where the microphone might get wet.

The microphone achieves this with a carefully constructed piezo element especially designed for this particular microphone. The microphone also features an internal preamp.

Because of the internal preamp, this microphone requires 24-48v Phantom power.

The microphones are designed, hand-built and tested at the Oaka workshop in Dorset, UK.

Spec

  • Height – 10mm
  • Diameter – 38mm
  • Operating voltage – 24 – 48v Phantom Power
  • Rean Male XLR connector
  • The microphone body is made from a highly durable plastic with a specially designed brass pickup element.

The post Oaka Instruments Tellus High Fidelity Active Contact Microphone (Miniature) appeared first on Elevator Sound.

]]> Oaka Instruments Tellus High Fidelity Active Contact Microphone (Magnetic) https://www.elevatorsound.com/product/oaka-instruments-tellus-high-fidelity-active-contact-microphone-magnetic/ Mon, 01 Jul 2024 12:55:05 +0000 https://www.elevatorsound.com/?post_type=product&p=91692 Tellus is a contact microphone with high sensitivity. It enables the listener to examine subtle sonic activity which would usually be hidden from our audible world. The microphone encourages listening to the very small and enlarging the unheard, bringing unusual and experimental sonic activity into our domain. With a thinner body but slightly slightly wider, the Magnetic version features eight powerful magnets surrounding the element. The microphone has been designed so the magnets do not affect the sound quality of the microphone. The magnets allow the microphone to be easily attached to a range of magnetic materials making it ideal for sound design sessions. The microphone achieves this with a carefully constructed piezo element especially designed for this particular microphone. The microphone also features an internal preamp. Because of the internal preamp, this microphone requires 24-48v Phantom power. The microphones are designed, hand-built and tested at the Oaka workshop in Dorset, UK. Spec Height – 14mm Diameter – 45mm Operating voltage – 24 – 48v Phantom Power Rean Male XLR connector The microphone body is made from a highly durable plastic with a specially designed brass pickup element. The microphone can is water resistant but is not designed to be […]

The post Oaka Instruments Tellus High Fidelity Active Contact Microphone (Magnetic) appeared first on Elevator Sound.

]]> Tellus is a contact microphone with high sensitivity. It enables the listener to examine subtle sonic activity which would usually be hidden from our audible world. The microphone encourages listening to the very small and enlarging the unheard, bringing unusual and experimental sonic activity into our domain.

With a thinner body but slightly slightly wider, the Magnetic version features eight powerful magnets surrounding the element. The microphone has been designed so the magnets do not affect the sound quality of the microphone. The magnets allow the microphone to be easily attached to a range of magnetic materials making it ideal for sound design sessions.

The microphone achieves this with a carefully constructed piezo element especially designed for this particular microphone. The microphone also features an internal preamp.

Because of the internal preamp, this microphone requires 24-48v Phantom power.

The microphones are designed, hand-built and tested at the Oaka workshop in Dorset, UK.

Spec

  • Height – 14mm
  • Diameter – 45mm
  • Operating voltage – 24 – 48v Phantom Power
  • Rean Male XLR connector
  • The microphone body is made from a highly durable plastic with a specially designed brass pickup element. The microphone can is water resistant but is not designed to be fully submerged in water.

The post Oaka Instruments Tellus High Fidelity Active Contact Microphone (Magnetic) appeared first on Elevator Sound.

]]> Solid State Logic SSL 2+ USB Audio Interface https://www.elevatorsound.com/product/solid-state-logic-ssl-2-usb-audio-interface-2/ Sat, 27 Jan 2024 18:14:03 +0000 https://www.elevatorsound.com/?post_type=product&p=87643 Solid State Logic studio tools have been at the heart of music production for over 40 years, helping world famous artists, producers and studios to create so many of the records you’ve come to know and love. Now, with SSL 2+, you get all that hit-making know-how in your own personal studio. With beautifully SSL-designed analogue microphone preamps and immaculate 24/192kHz conversion for studio-quality recording, pristine monitoring paths and high-performance headphone amps for crystal-clear playback and an intuitive front-panel low-latency monitor mix control, you’re always ready to capture the next great performance. The ‘Legacy 4K’ mode – inspired by classic SSL consoles, gives you the ability to add extra analogue character and sparkle to your sources when needed. To top it all off, the included ‘SSL Production Pack’ software bundle, which includes some of SSL’s own studio-grade Native plug-ins and a carefully selected range of DAWs, samples, loops and virtual instruments from industry leaders, gives you an incredible arsenal of tools for creating your next hit. Features 2-In/4-Out USB-C Audio Interface 2 x SSL-designed microphone preamps Legacy 4K – analogue colour enhancement, inspired by classic SSL consoles 2 x Professional grade, high-current headphone outputs: create a second independent headphone mix […]

The post Solid State Logic SSL 2+ USB Audio Interface appeared first on Elevator Sound.

]]> Solid State Logic studio tools have been at the heart of music production for over 40 years, helping world famous artists, producers and studios to create so many of the records you’ve come to know and love. Now, with SSL 2+, you get all that hit-making know-how in your own personal studio.

With beautifully SSL-designed analogue microphone preamps and immaculate 24/192kHz conversion for studio-quality recording, pristine monitoring paths and high-performance headphone amps for crystal-clear playback and an intuitive front-panel low-latency monitor mix control, you’re always ready to capture the next great performance.

The ‘Legacy 4K’ mode – inspired by classic SSL consoles, gives you the ability to add extra analogue character and sparkle to your sources when needed.

To top it all off, the included ‘SSL Production Pack’ software bundle, which includes some of SSL’s own studio-grade Native plug-ins and a carefully selected range of DAWs, samples, loops and virtual instruments from industry leaders, gives you an incredible arsenal of tools for creating your next hit.

Features

  • 2-In/4-Out USB-C Audio Interface
  • 2 x SSL-designed microphone preamps
  • Legacy 4K – analogue colour enhancement, inspired by classic SSL consoles
  • 2 x Professional grade, high-current headphone outputs: create a second independent headphone mix
  • SSL Production Pack software bundle
  • 24-bit / 192 kHz AD/DA Converters
  • Easy-to-use Monitor Mix Control
  • Balanced monitor outputs
  • Additional unbalanced RCA outputs for easy connection to DJ Mixers
  • MIDI I/O
  • USB 2.0 bus-powered audio interface for Mac/PC
  • Loopback feature available via firmware update

The post Solid State Logic SSL 2+ USB Audio Interface appeared first on Elevator Sound.

]]> Solid State Logic SSL 2 USB Audio Interface https://www.elevatorsound.com/product/solid-state-logic-ssl-2-usb-audio-interface/ Sat, 27 Jan 2024 16:20:34 +0000 https://www.elevatorsound.com/?post_type=product&p=87638 Solid State Logic studio tools have been at the heart of music production for over 40 years, helping world famous artists, producers and studios to create so many of the records you’ve come to know and love. Now, with SSL 2, you get all that hit-making know-how in your own personal studio. With beautifully SSL-designed analogue microphone preamps and immaculate 24/192kHz conversion for studio-quality recording, pristine monitoring path and high-performance headphone amp for crystal-clear playback and an intuitive front-panel low-latency monitor mix control, you’re always ready to capture the next great performance. The ‘Legacy 4K’ mode – inspired by classic SSL consoles, gives you the ability to add extra analogue character and sparkle to your sources when needed. To top it all off, the included ‘SSL Production Pack’ software bundle, which includes some of SSL’s own studio-grade Native plug-ins and a carefully selected range of DAWs, samples, loops and virtual instruments from industry leaders, gives you an incredible arsenal of tools for creating your next hit. Features 2-In/4-Out USB-C Audio Interface 2 x SSL-designed microphone preamps Legacy 4K – analogue colour enhancement, inspired by classic SSL consoles 2 x Professional grade, high-current headphone outputs: create a second independent headphone mix […]

The post Solid State Logic SSL 2 USB Audio Interface appeared first on Elevator Sound.

]]> Solid State Logic studio tools have been at the heart of music production for over 40 years, helping world famous artists, producers and studios to create so many of the records you’ve come to know and love. Now, with SSL 2, you get all that hit-making know-how in your own personal studio.

With beautifully SSL-designed analogue microphone preamps and immaculate 24/192kHz conversion for studio-quality recording, pristine monitoring path and high-performance headphone amp for crystal-clear playback and an intuitive front-panel low-latency monitor mix control, you’re always ready to capture the next great performance.

The ‘Legacy 4K’ mode – inspired by classic SSL consoles, gives you the ability to add extra analogue character and sparkle to your sources when needed.

To top it all off, the included ‘SSL Production Pack’ software bundle, which includes some of SSL’s own studio-grade Native plug-ins and a carefully selected range of DAWs, samples, loops and virtual instruments from industry leaders, gives you an incredible arsenal of tools for creating your next hit.

Features

  • 2-In/4-Out USB-C Audio Interface
  • 2 x SSL-designed microphone preamps
  • Legacy 4K – analogue colour enhancement, inspired by classic SSL consoles
  • 2 x Professional grade, high-current headphone outputs: create a second independent headphone mix
  • 24-bit / 192 kHz AD/DA Converters
  • Easy-to-use Monitor Mix Control
  • Balanced monitor outputs + Additional unbalanced RCA outputs for easy connection to DJ Mixers
  • MIDI I/O
  • USB 2.0 bus-powered audio interface for Mac/PC
  • Legacy 4K Analogue Enhancement – Inspired by SSL4000 series console
  • SSL Production Pack – Exclusive software bundle

    • The post Solid State Logic SSL 2 USB Audio Interface appeared first on Elevator Sound.

    ]]> Teenage Engineering TP-7 Portable Field Recorder https://www.elevatorsound.com/product/teenage-engineering-tp-7-portable-field-recorder/ Mon, 22 Jan 2024 12:19:07 +0000 https://www.elevatorsound.com/?post_type=product&p=87508 There are thoughts, ideas and fragments that – for the sake of humanity – we need to record and be able to return to as a reference, as a seed for new thoughts or just to remember another time. TP–7 is built for just that, to record sound, music, interviews and important ideas with zero friction in the highest possible quality. A device engineered in every detail to do only one thing and to do it well. A dedicated piece of hardware for ideas, or just a dirty riff. TP–7 fits perfectly in the palm of your hand and lets your fingers naturally adopt the controls. the index finger triggers fast forward and the middle finger rewinds. Your thumb records a memo, the pinky selects the mode. It’s a genuinely rewarding man-machine experience. The center piece of the TP–7 is the motorized tape reel. A delicately engineered brushless motor with ball bearings, and a highly sensitive hall sensor that lets you virtually grab your recording. The reel is also used for scrubbing, to pause, menu navigation and as gentle visual feedback during playback and recording. The side-mounted rocker allows you to quickly scrub through your audio, just press on the […]

    The post Teenage Engineering TP-7 Portable Field Recorder appeared first on Elevator Sound.

    ]]>     There are thoughts, ideas and fragments that – for the sake of humanity – we need to record and be able to return to as a reference, as a seed for new thoughts or just to remember another time. TP–7 is built for just that, to record sound, music, interviews and important ideas with zero friction in the highest possible quality. A device engineered in every detail to do only one thing and to do it well. A dedicated piece of hardware for ideas, or just a dirty riff.

    TP–7 fits perfectly in the palm of your hand and lets your fingers naturally adopt the controls. the index finger triggers fast forward and the middle finger rewinds. Your thumb records a memo, the pinky selects the mode. It’s a genuinely rewarding man-machine experience.

    The center piece of the TP–7 is the motorized tape reel. A delicately engineered brushless motor with ball bearings, and a highly sensitive hall sensor that lets you virtually grab your recording. The reel is also used for scrubbing, to pause, menu navigation and as gentle visual feedback during playback and recording. The side-mounted rocker allows you to quickly scrub through your audio, just press on the top edge to fast forward, and down to rewind. Watch the wheel spin around and hear your tracks scrub in ’hyperspeed’.

    A key feature of the TP–7 is its ability to streamline the process of turning audio into text. simply connect your phone to TP–7 via Bluetooth or usb, open the TP–7 app and press transcribe. Job done!

    TP–7 features three stereo two-way jacks to be used as either inputs or outputs, for connecting external mics, headphones, studio monitors, or any other audio equipment like OP–1 field or TX–6, recording with all 6 stereo channels. Use USB-C for multi-channel audio interface, midi, data transfer and charging, and ble and MFi for wireless connectivity. TP–7 also includes our 6.35 mm to 3.5 mm jack adapter. add to that 128 GB of internal storage and you can preserve 5 minutes of ideas a day for 20 years.

    Specifications

    • 3x stereo two-way jack input/?output/headset connectors
    • 1x stereo headphones connector with 3.5 to 6.35 mm jack adapter
    • internal microphone and speaker
    • 128 GB internal storage
    • 24-bit/96 kHz usb audio interface
    • bluetooth low energy
    • rechargeable battery
    • 7 hr battery life

    Size: 96 mm x 68 mm x 16 mm
    Wight: 170 g / 5.6 oz

    The post Teenage Engineering TP-7 Portable Field Recorder appeared first on Elevator Sound.

    ]]>         Teenage Engineering TX-6 Portable Mixer/Interface https://www.elevatorsound.com/product/teenage-engineering-tx-6-portable-mixer-interface/ Mon, 22 Jan 2024 12:01:09 +0000 https://www.elevatorsound.com/?post_type=product&p=87504 TX–6 is an ultra-portable, battery-powered mixer and multi-channel audio interface. Comparable to larger units, but with even more tech packed into one sturdy little machine. Mix 6 stereo input channels, use tempo sync, discover the internal synthesizer and sequencer or use the built-in tuner. MFi compatibility even lets you connect to your iOS devices. TX–6 features a 6 channel stereo mixer with a configurable knob layout. choose to have the three-band eq at your fingertips, or customize each knob to control whichever setting you prefer. with more than meets the eye, TX–6 is packed full of features and connectivity options. Connect TX–6 to your computer via USB-C to use it as a multi-function 32-bit/48khz audio interface with 12 channel multitrack recording. Features 6 stereo input connectors, stereo or mono 2 stereo output connectors 1 stereo headphones connector with headset microphone support usb audio / midi interface at 24-bit/48kHz bluetooth low energy radio interface rechargeable battery with 8hr battery life Size: 90 mm (102 mm with adapter) x 62 mm x 23 mm Weight: 160 g / 5.6 oz

    The post Teenage Engineering TX-6 Portable Mixer/Interface appeared first on Elevator Sound.

    ]]>     TX–6 is an ultra-portable, battery-powered mixer and multi-channel audio interface. Comparable to larger units, but with even more tech packed into one sturdy little machine. Mix 6 stereo input channels, use tempo sync, discover the internal synthesizer and sequencer or use the built-in tuner. MFi compatibility even lets you connect to your iOS devices.

    TX–6 features a 6 channel stereo mixer with a configurable knob layout. choose to have the three-band eq at your fingertips, or customize each knob to control whichever setting you prefer. with more than meets the eye, TX–6 is packed full of features and connectivity options. Connect TX–6 to your computer via USB-C to use it as a multi-function 32-bit/48khz audio interface with 12 channel multitrack recording.

    Features

    • 6 stereo input connectors, stereo or mono
    • 2 stereo output connectors
    • 1 stereo headphones connector with headset microphone support
    • usb audio / midi interface at 24-bit/48kHz
    • bluetooth low energy radio interface
    • rechargeable battery with 8hr battery life

    Size: 90 mm (102 mm with adapter) x 62 mm x 23 mm
    Weight: 160 g / 5.6 oz

    The post Teenage Engineering TX-6 Portable Mixer/Interface appeared first on Elevator Sound.

    ]]>