It offers a broad collection of unique, high-quality synth voices, each with extensive, customisable parameters. These parameters can be directly controlled or modulated through assignable internal and external sources.

Certain per-voice parameters support audio-rate modulation, including FM, sync, and DSP. Each voice also supports up to four-voice chords, external-triggered envelopes, multiple LFOs, and dual audio outputs for comprehensive desktop-like synth functionality.

Voices include a multi dimensional wavetable oscillator based on the original MCO, a complex additive synthesis engine, a multi mode ’JP’ type digi-synth, a lush virtual analog implementation, a fully featured vocoder, a bass synth for both kicks and sub sonic tones and finally a rebirth and porting of our discontinued SID GUTs chip voice.

Each voice includes factory presets as well as the ability to store and recall user presets. All state is preserved across power cycles.

The MCO Mk II is designed to be familiar, quick and easy to use with a high resolution colour display and a rich visual user interface.

A USB-C connection allows for easy firmware updates, user wavetables upload and device config backup and restore. Axon expander modules are also supported to increase CV control options.

Features

• Great collection of unique, varied, and great sounding synth voices each with numerous parameters.
• All synthesis voices support up to 4 voice chord and dual outputs.
• Built in Envelopes and LFOs for modulation and voice behaviour.
• Factory and user saveable presets per synthesis voice.
• Graphically rich colour and easy to use UI.
• All settings remain between power cycles.
• 4 freely assignable CV inputs.
• Audio rate input for FM, Sync and more.
• Support for Axon expanders for up to 8 assignable CV inputs.
• USB-C for quick and easy ‘drag and drop’ firmware updates, custom wavetable upload and device backup/restore.
• Also available as a virtualised VCV software module.

Specifications

• Width: 6hp
• Depth: 32mm
• Power: +12V 70mA / -12V 30mA

Manufacturer product page here.

The post ALM Busy Circuits MCO mkII Eurorack Compact Multi Synth Voice Module appeared first on Elevator Sound.

Inspired by our favourite classic hardware effects processors, the MFX incorporates DSP effect technologies from the dawn of digital effects in the 70s to the present day. Reshape sounds with the distortion and dynamics engines. Bend time space and pitch with multiple feature rich reverb and delay engines. Modulate signals with the flexible panner, frequency shifter, and range of ensemble effects. Fracture sounds with the one of a kind granular and glitch engines.

The MFX Pedal user interface is designed to be familiar, quick and easy to use. Each program contains a wide range of controllable parameters both directly editable or freely assigned to knobs, MIDI or expression control. Each program includes factory presets as well as the ability to store and recall user presets. All states are preserved across power cycles.

Available for the first time outside of modular, the MFX pedal easily brings the character and uniqueness of ALM effects to your guitar rig, DAWless setup, mixer effects send or synth collection.

Features

• A large varied collection of 18 effects programs, all with numerous controllable parameters.
• Effect parameters freely assignable to panel knobs, expression input or MIDI control.
• Works well with guitar, line and ’pro’ level instruments.
• In built optional analogue gain stage (+10dB) for low level signals.
• True relay or buffered DSP bypass with footswitch control and LED indicator.
• Stereo I/O paths with all Neutrik jacks.
• Clip level indication LED.
• Tap Tempo and triggering via footswitch.
• Din MIDI input for MIDI beat clock synchronisation and MIDICC control.
• All settings remain between power cycles.
• Factory and user saveable presets per effect.
• USB-C for quick and easy ‘drag and drop’ firmware updates via computer.
• Rugged lightweight black anodised aluminium enclosure.
• 2 Year Warranty.
• Made in England.

Tech Specs

• Power: 9V DC power, center negative
• Current Draw: 100mA (200mA+ supply recommended)
• Input Impedance: 1MOhm
• Output Impedance: 1KOhm
• Max Input level: +8 dBu (2 Vrms ~ approx 5Vpp)
• Optional Gain Stage: +10 dB
• Bypass: True Relay & Buffered DSP based
• Expression input: 0-3V
• Dimensions: 125x65x70mm
• 16 Bit / 44.1Khz Stereo processing with 32 bit floating point DSP
• ARM CPU based DSP

Manufacturer product page here.

The post ALM Busy Circuits MFX Stereo Multi-FX Pedal appeared first on Elevator Sound.

The voices also feature built in VCAs and various modulation controls and inputs, a cv-able chord mode, tracking ability, triggered mode switching and can be output independently or mixed with stereo widening. The ’CIZZLE’ finally brings characteristic CZ style synthesis to Eurorack with a rich palette of sounds from mellow ambient tones, 90s Detroit Techno inspired chords, Reese style basses, and synth tones with unique faux resonance squelch.

Features

• Dual phase distortion VCO with direct and voltage controlled parameters.
• Easy, quick and accurate tuning via an encoder control.
• 9 morphing phase distortion ’Algorithms’(OscA)
• PD Offset ’Shape’
• Unique CZ resonance waveform (OscB)
• Multiple OscB modes; Rez, RingMod and Noise based on classic CZ synthesis.
• Mode switchable via direct and trigger control.
• Optional OscB frequency tracking of OscA with offset.
• Voltage controlled chord mode with inversion and up to 8 voices.
• Dedicated oscillator output level VCAs.
• Separate dual or mixed outputs with stereo widening effect.
• Skiff friendly with reverse power protection.
• 2 Year Manufacturers Warranty.
• Made in England

Specifications
Width: 16hp
Depth: 32mm
Power: +12v 65mA, -12v 25mA

Manufacturer product page here.
Product manual here.

The post ALM Busy Circuits Cizzle Eurorack Dual Phase Distortion Oscillator Module appeared first on Elevator Sound.

It includes a stereo line input converter for incorporating line level external sources into a Eurorack system, a fixed 4 input mixer with breakout attenuator for combining signals, a gated slew limiter for adding slides to sequences, a sample and hold with analog white noise with a myriad of uses such as generative melodies or producing percussive textures and finally a buffered mult for droop free signal distribution with handy LEDs to monitor.

All sections are normalised to help with typical use cases such as generating random CV from the sample & hold section, a smooth random source from the slew output and breaking out a standalone attenuator from the fourth mixer input.

The ‘MEGA MILTON’ provides essential classic synthesizer building blocks for patching in any Eurorack system.

Features

• Stereo line in to Eurorack level converter & mono splitter.
• Four input summing mixer with break out attenuator.
• Slew limiter circuit with gate input for switching on and off.
• High quality sample & hold circuit with low ‘droop rate’.
• Analog White noise generator.
• Buffered multiple with LED polarity indicators.
• Normalisation between sections for simplified patching.
• Skiff friendly with reverse power protection.
• 2 Year Warranty
• Made in England.

Specifications

• Width: 8hp
• Depth: 32mm
• Power: +12v 70mA / -12v 70mA

Manufacturer product page here.
Product manual here.

The post ALM Busy Circuits Mega Milton Eurorack Utility Module appeared first on Elevator Sound.

The inputs accept stereo or mono signals (via normalisation) which can be audio or CV (module is DC coupled) and the top mixer’s outputs are normalised to the bottom mixer section meaning if the upper output is left unpatched the two upper inputs will be added to the lower output.

Features

• 4 stereo input pairs
• 2 stereo output pairs
• Functions as a two smaller mixers or one larger mixer (via normalisiation)
• DC Coupled for the mixing of audio or CV signals
• Skiff friendly with reverse power protection

Specifications
Width: 4hp
Depth: 32mm
Power: +12V 8ma -12V 8ma

Manufacturer product page here.
Product manual here.

The post ALM Busy Circuits Stereo Sum Eurorack Stereo Unity Gain Mixer appeared first on Elevator Sound.

With the inclusion of both input gain and level controls, each channel can be overdriven, producing the signature saturated and lively sound the BX mixers are known for. The EQ controls provide the channels with simple but great sounding high and low shelf EQs for emphasising and shaping sounds as well as the tonality of the drive. An additional Aux input allows another mixer or extra sound source to be chained in.

The BXx2 is a simple but powerful sound shaping tool, adding colour and warmth to anything patched through it. It was designed in collaboration with Feedback Modules – based on their single channel PRE BX module and has a limited release of only 300 units.

Features

• Dual mixer channels with additional auxiliary mix input.
• Overdriving preamps with separate gain and level controls.
• Per channel high & low shelf EQ.
• Skiff friendly with reverse power protection.

Specifications
Width: 8hp
Depth: 32mm
Power: +12V 10mA / -12V 10mA

Manufacturer product page here.
Product manual here.

The post ALM Busy Circuits BXx2 Eurorack Preamp/EQ/Mixer Module appeared first on Elevator Sound.

The primary shape output freely moves between sine (or triangle), saw, pulse and square wave shapes before passing through the built in output VCA for on board level control. Additional common direct shape outputs and dual -1 and -2 octave sub outputs are also available, offering the familiar flexibility of more traditional VCOs.

The through zero FM input includes both direct and voltage control over modulation index for fast and straightforward additive patching when paired with a secondary mod oscillator. Additional features include the unique octave transpose CV input (0, +1, +2 octaves), hard sync input and an LFO mode with bipolar LED indication.

Designed to act as the primary oscillator in your system the ‘TAZM-O’ offers a wide range of timbral and patch flexibility within a relatively compact 12HP size, making it the perfect fit for any modular system.

Features

• Continuous crossfading wave shape with direct and voltage control.
• Through-zero FM input with direct and voltage controlled mod index.
• Dedicated outputs for sine (or triangle), saw and square sub-1 & sub-2.
• Primary output with level VCA.
• V/Oct input with approx 8 octave range.
• Octave transpose CV input ranging 3 octaves.
• Hard Sync input.
• LFO mode with bipoler LED indication.
• Rear switches for selecting Sub-2 pulse width, and sine/triangle waves.
• Skiff friendly with reverse power polarity protection.

Specifications
Width: 12hp
Depth: 38mm
Power: +12v 70ma / -12v 60ma
Manufacturer product page here.
Product manual here.

The post ALM Busy Circuits TAZM-O Eurorack Analog Oscillator appeared first on Elevator Sound.

The addition of AXON-2 increases the Squid, MFX or Pam PRO’s total number of CV inputs by 4, greatly increasing the possibilities for vast modular manipulation. Each of the CV inputs includes an offset for hands on control over parameters assigned to CV. Per assignment digital attenuation and offset via the host module is also available for fine tuning the modulation or control over parameters.

The AXON-2’s large buttons are great for controlling select functions in a live performance environment or adding convenient quick navigation shortcuts when making edits. The buttons functionality and assignability are dependent on the host module. See respective manuals for details.

NOTE: AXON-2 support requires the latest firmware be installed for Pam Pro (120 or newer), Squid (187 or newer) and MFX (105 or newer).

Features

• 4 Additional freely assignable CV inputs for the SQUID SALMPLE, MFX or Pamela’s PRO Workout
• Manual offset knob controls
• Two Assignable performance buttons for mutes, tap tempo, navigation, etc (dependant on module)
• Powered directly from the module, no additional power header required
• Made in England
• Skiff friendly

Specifications

• Width: 8hp
• Depth: 38mm
• Power: Additional approx 10mA on +12V of attached module

Manufacturer product page here.
Product manual here.

The post ALM Busy Circuits Axon-2 Eurorack Expander Module (MFX, Pamela’s Pro Workout, Squid Salmple) appeared first on Elevator Sound.

Voltage control over the crossfade and DC coupling allow for further creative uses such as a high quality stereo VCA or as a mix processor for either stereo audio signals or CV.

The MFD is designed to have very low noise and cross bleed and employs equal power crossfading for smooth constant level blending between signal sources.

Features

• Two channel stereo crossfader with voltage control.
• Approx equal power crossfading.
• Cue output switches for direct monitoring of either stereo input (pairing well with HPO for headphone monitoring).
• Can be used as a high quality stereo VCA.
• DC coupled for use with both audio and CV.
• Skiff friendly with reverse power protection.
• Two year warranty.
• Made in England.

Specifications

Manufacturer product page here.
Product manual here.

The post ALM Busy Circuits MFD DJ Crossfader and Stereo VCA Eurorack Module appeared first on Elevator Sound.

Extend Pam as a master to clock external gear with super solid dedicated MIDI & Din Sync clock outputs.

Use the extra fixed clocked gate outputs to free up Pam’s main outputs for unique sequencing or complex modulation duties.

Connects directly to and is powered by the ‘MIDI-EX’ expander header on rear of Pamela’s PRO Workout.

Only a single output expander is supported at any time but either can be used alongside an AXON-1 CV input expander.

Adapter cables are available for connecting to DIN type connectors, for both MIDI and Din Sync. PPEXP 1 includes a MIDI Din adapter cable.

Specifications

• Width: 2hp
• Depth:
• Power:

Manufacturer product page here.
Product manual here.

The post ALM Busy Circuits PPEXP2 Eurorack Pamela’s Pro Workout Expander Module appeared first on Elevator Sound.