Instruo Archives - Elevator Sound https://www.elevatorsound.com/brand/instruo/ Eurorack Modular, Synthesizer & Electronic Music Hardware Store Thu, 12 Dec 2024 01:55:23 +0000 en-GB hourly 1 https://wordpress.org/?v=6.7.1 Instruo Gloc Eurorack Clock Generator Processor Module https://www.elevatorsound.com/product/instruo-gloc-eurorack-clock-generator-processor-module/ Thu, 05 Dec 2024 12:00:23 +0000 https://www.elevatorsound.com/?post_type=product&p=94532 Introducing gloc, a clock generator and processor. Capable of turning a single internal/external clock input into a stream of related clock sources. Predictable division/multiplication, complex trigger/gate sequences via probabilistic masking – or any combination of both across each of its 7 clock pulse outputs. Onboard dynamic phase alignment, smart tap tempo detection and locked vs live modes make gloc excellent for performative and generative temporal exploration! Features Tap tempo clock generator 1 clock input to 7 output Clock processor Manual or CV control over the spread of clock divisions/multiplications Probabilistic “coin-toss” logic for random phrasing Probabilistic density masking for repeated phrasing Manual Pulse width control over Clock Pulse outputs Dedicated Clock Reset input Live and Lockable Clock output states Smart tempo follower and manual button Save and recall settings between power cycles Specifications Width: 4hp Depth: 31mm Power: +12v 75mA / -12v 0mA Manufacturer product page here. Product manual here.

The post Instruo Gloc Eurorack Clock Generator Processor Module appeared first on Elevator Sound.

]]> Introducing gloc, a clock generator and processor. Capable of turning a single internal/external clock input into a stream of related clock sources. Predictable division/multiplication, complex trigger/gate sequences via probabilistic masking – or any combination of both across each of its 7 clock pulse outputs.

Onboard dynamic phase alignment, smart tap tempo detection and locked vs live modes make gloc excellent for performative and generative temporal exploration!

Features

  • Tap tempo clock generator
  • 1 clock input to 7 output Clock processor
  • Manual or CV control over the spread of clock divisions/multiplications
  • Probabilistic “coin-toss” logic for random phrasing
  • Probabilistic density masking for repeated phrasing
  • Manual Pulse width control over Clock Pulse outputs
  • Dedicated Clock Reset input
  • Live and Lockable Clock output states
  • Smart tempo follower and manual button
  • Save and recall settings between power cycles

Specifications

  • Width: 4hp
  • Depth: 31mm
  • Power: +12v 75mA / -12v 0mA

Manufacturer product page here.
Product manual here.

The post Instruo Gloc Eurorack Clock Generator Processor Module appeared first on Elevator Sound.

]]> Instruo Dail Eurorack Pattern Quantiser Module https://www.elevatorsound.com/product/instruo-dail-eurorack-pattern-quantiser-module/ Wed, 15 May 2024 13:00:54 +0000 https://www.elevatorsound.com/?post_type=product&p=90377 The Instruo dail is a high resolution quantiser, precision adder, MIDI-to-CV interface, and USB MIDI Host with a very small form factor suitable for any system. As a quantiser, scales can be defined locally as well as externally via MIDI. The USB Host port will accept and power class compliant devices offering convenience and immediacy to melodies and sequences. As a precision adder, existing signals can be offset by any defined chromatic interval. Transpose anything with accuracy using the calibrated buffered throughput which runs parallel to the quantiser engine. This feature alone makes for a great companion to any sequencer or 1V/octave source within a system. No longer is a single repeating octave of quantised notes a limitation. The dail features a fully bipolar quantiser engine through which any multi-octave spanning scale/chord/arpeggio can be engaged immediately from your MIDI keyboard. Patterns can also be programmed onboard with precision with the ability to auto fill from a wide range of major and minor starting points. Small form factor, big feature set! The Dail will suit any scale of system adding flexibility and immediacy to your melodic needs. Features Multi-octave pattern quantiser On-board and MIDI controllable scale programming Chromatic interval precision adder […]

The post Instruo Dail Eurorack Pattern Quantiser Module appeared first on Elevator Sound.

]]> The Instruo dail is a high resolution quantiser, precision adder, MIDI-to-CV interface, and USB MIDI Host with a very small form factor suitable for any system.

As a quantiser, scales can be defined locally as well as externally via MIDI. The USB Host port will accept and power class compliant devices offering convenience and immediacy to melodies and sequences.

As a precision adder, existing signals can be offset by any defined chromatic interval. Transpose anything with accuracy using the calibrated buffered throughput which runs parallel to the quantiser engine. This feature alone makes for a great companion to any sequencer or 1V/octave source within a system.

No longer is a single repeating octave of quantised notes a limitation. The dail features a fully bipolar quantiser engine through which any multi-octave spanning scale/chord/arpeggio can be engaged immediately from your MIDI keyboard. Patterns can also be programmed onboard with precision with the ability to auto fill from a wide range of major and minor starting points.

Small form factor, big feature set!
The Dail will suit any scale of system adding flexibility and immediacy to your melodic needs.

Features

  • Multi-octave pattern quantiser
  • On-board and MIDI controllable scale programming
  • Chromatic interval precision adder
  • MIDI-to-CV interface
  • USB MIDI host for class compliant controllers
  • Includes 2 HP MIDI Expander
  • Includes 5-pin DIN to TRS MIDI Type A adapter
  • TRS MIDI Type A and Type B compatibility

Specifications

  • Width: 4hp + 2hp
  • Depth: 32mm
  • Power: +12v 100mA / -12v 8mA

Manufacturer product page here.
Product manual here.

The post Instruo Dail Eurorack Pattern Quantiser Module appeared first on Elevator Sound.

]]> Instruo Dapf Eurorack Dual All Pass Filter Module https://www.elevatorsound.com/product/instruo-dapf-eurorack-dual-all-pass-filter-module/ Tue, 20 Feb 2024 14:00:59 +0000 https://www.elevatorsound.com/?post_type=product&p=88044 Introducing dåpf, the first dedicated effects processor in the Instruo product line. The Instruo dåpf is a set of two analogue all-pass filters. You might be asking yourself, “What is the point of a filter that passes everything?” All-pass filters don’t actually attenuate frequency amplitudes directly, but rather alter the phase relationship of frequencies across the spectrum. All-pass filter stages appear in the vast majority of voltage-controlled filter topologies as well as serving as a core building block within DSP. The normalled I/O of dåpf allows for cascaded or independent use of the two all-pass filter circuits, offering everything from classic phase-shifting to psychoacoustic stereo enhancement and synthetic Doppler effect. Features Two parallel all-pass filters Independent attenuverters for voltage control 1-Pole/2-Pole configuration for left channel Cascaded normalisation Global 1 volt per octave tracking Specifications Width: 4hp Depth: 30mm Power: +12v 60mA / -12v 60mA Manufacturer product page here. Product manual here.

The post Instruo Dapf Eurorack Dual All Pass Filter Module appeared first on Elevator Sound.

]]> Introducing dåpf, the first dedicated effects processor in the Instruo product line. The Instruo dåpf is a set of two analogue all-pass filters.

You might be asking yourself, “What is the point of a filter that passes everything?” All-pass filters don’t actually attenuate frequency amplitudes directly, but rather alter the phase relationship of frequencies across the spectrum. All-pass filter stages appear in the vast majority of voltage-controlled filter topologies as well as serving as a core building block within DSP.

The normalled I/O of dåpf allows for cascaded or independent use of the two all-pass filter circuits, offering everything from classic phase-shifting to psychoacoustic stereo enhancement and synthetic Doppler effect.

Features

  • Two parallel all-pass filters
  • Independent attenuverters for voltage control
  • 1-Pole/2-Pole configuration for left channel
  • Cascaded normalisation
  • Global 1 volt per octave tracking

Specifications

  • Width: 4hp
  • Depth: 30mm
  • Power: +12v 60mA / -12v 60mA

Manufacturer product page here.
Product manual here.

The post Instruo Dapf Eurorack Dual All Pass Filter Module appeared first on Elevator Sound.

]]> Instruo x DivKid Ochd Expander Eurorack Module https://www.elevatorsound.com/product/instruo-ochd-expander-eurorack-module/ Thu, 26 Oct 2023 17:56:26 +0000 https://www.elevatorsound.com/?post_type=product&p=84602 Launched in 2019 and designed in collaboration with Ben “DivKid” Wilson, the Instruo øchd has set a standard for compact and versatile modulation sources which can now be seen across thousands of eurorack systems. The øchd’s 8 analogue outputs can now be be tripled with a farther 16 unique control voltage sources by pairing it with the øchd expander ([ø] 4^2). All outputs are derived from combinations of the 8 analogue triangle LFO cores to produce an extravagant range of variable voltages, triggers and 4x 4-Bit DAC based stepped random voltage sources which are best described as flavours of “slow noise”. Enhance your existing modulation capabilities immediately with this 4HP cluster of control voltage capabilities. Note: øchd required, all cables included with expander Features 4 full wave rectifiers 2 pairs of analogue diode logic Max/Min signal generators 4 trigger sources which can combine in a cascaded fashion through normal connections 4 4-Bit DAC outputs generating variations of slow noise Specifications Width: 4hp Depth: 32mm Power: +5mA / -5mA Manufacturer product page here. Product manual here.

The post Instruo x DivKid Ochd Expander Eurorack Module appeared first on Elevator Sound.

]]> Launched in 2019 and designed in collaboration with Ben “DivKid” Wilson, the Instruo øchd has set a standard for compact and versatile modulation sources which can now be seen across thousands of eurorack systems.

The øchd’s 8 analogue outputs can now be be tripled with a farther 16 unique control voltage sources by pairing it with the øchd expander ([ø] 4^2).

All outputs are derived from combinations of the 8 analogue triangle LFO cores to produce an extravagant range of variable voltages, triggers and 4x 4-Bit DAC based stepped random voltage sources which are best described as flavours of “slow noise”.

Enhance your existing modulation capabilities immediately with this 4HP cluster of control voltage capabilities.

Note: øchd required, all cables included with expander

Features

  • 4 full wave rectifiers
  • 2 pairs of analogue diode logic Max/Min signal generators
  • 4 trigger sources which can combine in a cascaded fashion through normal connections
  • 4 4-Bit DAC outputs generating variations of slow noise

Specifications

  • Width: 4hp
  • Depth: 32mm
  • Power: +5mA / -5mA

Manufacturer product page here.
Product manual here.

The post Instruo x DivKid Ochd Expander Eurorack Module appeared first on Elevator Sound.

]]> Instruo Arbhar V2.0 Firmware Expansion Pack https://www.elevatorsound.com/product/instruo-arbhar-v2-0-firmware-expansion-pack/ Mon, 09 Oct 2023 15:35:03 +0000 https://www.elevatorsound.com/?post_type=product&p=83929 The arbhar V2.0 firmware expansion pack includes everything you need to get started with the new update. Plug and play! A 2HP expander module introduces front access to the arbhar’s USB port for extra convenience accessing the new scenes and parameter configurations in addition to saving and loading audio samples. Included is a new USB drive (8GB) which contains the Instru? arbhar library containing 216 samples produced by the team. There is also a replacement microSD card included which is pre-flashed with the V2.0 base firmware. This upgrades an arbhar module immediately. Features USB expander module USB cable 8GB (white) USB drive containing the Instruo sample library microSD card preflashed with the V2.0 firmware V2 quickstart guide Specifications Width: 2hp USB Input Expander Depth: 60mm Power: N/A Manufacturer product page here. Product manual here.

The post Instruo Arbhar V2.0 Firmware Expansion Pack appeared first on Elevator Sound.

]]> The arbhar V2.0 firmware expansion pack includes everything you need to get started with the new update. Plug and play! A 2HP expander module introduces front access to the arbhar’s USB port for extra convenience accessing the new scenes and parameter configurations in addition to
saving and loading audio samples.

Included is a new USB drive (8GB) which contains the Instru? arbhar library containing 216 samples produced by the team. There is also a replacement microSD card included which is pre-flashed with the V2.0 base firmware. This upgrades an arbhar module immediately.

Features

  • USB expander module
  • USB cable
  • 8GB (white) USB drive containing the Instruo sample library
  • microSD card preflashed with the V2.0 firmware
  • V2 quickstart guide

Specifications

  • Width: 2hp USB Input Expander
  • Depth: 60mm
  • Power: N/A

Manufacturer product page here.
Product manual here.

The post Instruo Arbhar V2.0 Firmware Expansion Pack appeared first on Elevator Sound.

]]> Instruo Arbhar V2.0 Eurorack Granular Processor Module https://www.elevatorsound.com/product/instruo-arbhar-v2-0-eurorack-granular-processor-module/ Mon, 09 Oct 2023 15:35:03 +0000 https://www.elevatorsound.com/?post_type=product&p=83922 In 2019 the launch of the arbhar heralded a new generation of granular processing in Eurorack. Sampled audio can be chopped into tiny grains, scattered, shaped, re-pitched, reversed, and layered for an endless range of audio manipulation from seamless frozen tones to mutated acousmatic madness. Each grain sounds with its defined specifications. When modulation is used, the “per-grain parameter” definition allows for true polyphonic layering. With the introduction of firmware version 2 (2023) comes a complete rewrite of the entire codebase to implement both technical and conceptual improvements that will enhance the entire user experience of the arbhar. We have ensured that the overall feel of the module has been preserved as much as possible. Advances in efficiency and expanded features will allow the arbhar to explore many more sonic and musical spaces. Meet the Lexer Method 2.0. Features Up to 88 stereo grains between two granular engines, allowing for polyphonic layering Mono and stereo input configurations Six 10 second individual audio buffers 1 volt per octave pitch tracking On-board random pitch deviation and grain direction probability Scan mode, Follow mode, and Wavetable mode Stereo pan, feedback delay, and reverb configurations Built-in condenser microphone Analogue input pre-amplifier and limiter Audio […]

The post Instruo Arbhar V2.0 Eurorack Granular Processor Module appeared first on Elevator Sound.

]]> In 2019 the launch of the arbhar heralded a new generation of granular processing in Eurorack. Sampled audio can be chopped into tiny grains, scattered, shaped, re-pitched, reversed, and layered for an endless range of audio manipulation from seamless frozen tones to mutated acousmatic madness. Each grain sounds with its defined specifications. When modulation is used, the “per-grain parameter” definition allows for true polyphonic layering.

With the introduction of firmware version 2 (2023) comes a complete rewrite of the entire codebase to implement both technical and conceptual improvements that will enhance the entire user experience of the arbhar. We have ensured that the overall feel of the module has been preserved as much as possible. Advances in efficiency and expanded features will allow the arbhar to explore many more sonic and musical spaces.

Meet the Lexer Method 2.0.

Features

  • Up to 88 stereo grains between two granular engines, allowing for polyphonic layering
  • Mono and stereo input configurations
  • Six 10 second individual audio buffers
  • 1 volt per octave pitch tracking
  • On-board random pitch deviation and grain direction probability
  • Scan mode, Follow mode, and Wavetable mode
  • Stereo pan, feedback delay, and reverb configurations
  • Built-in condenser microphone
  • Analogue input pre-amplifier and limiter
  • Audio analysis with onset detection for automatic audio capturing
  • Includes 2 HP passive CV Expansion module and 4GB USB flash drive
  • User-definable configuration for complete instrument customisation
  • Save, Load and Clone audio between layers
  • Curate/recall entire performance configurations with up to 42 Scenes.
  • USB import and export functionality

Specifications

  • Width: 18hp + 2hp Expander + 2hp USB Input Expander
  • Depth: 42mm (60mm with USB expander)
  • Power: +230mA / -30mA

Manufacturer product page here.
Product manual here.

The post Instruo Arbhar V2.0 Eurorack Granular Processor Module appeared first on Elevator Sound.

]]> Instruo Tagh V2 Eurorack Random Voltage Source Module https://www.elevatorsound.com/product/instruo-tagh-v2-eurorack-random-voltage-source-module/ Thu, 04 May 2023 11:00:40 +0000 https://www.elevatorsound.com/?post_type=product&p=77371 The Instru? tágh is a “Swiss Army Knife” modulation source. It features an analogue sample and hold, digital random voltage generator, morphing LFO, and probabilistic trigger generator, and white noise generator, all with a unique phase-adaptive tap tempo functionality. After many iterations of random voltage generation experiments, tágh’s 6 algorithms were meticulously curated to meet the needs of the designer. Once realised, it was quick to see its importance in small and big systems alike. These 6 random algorithms include Classic Stepped Random, Repeatable Stepped Random, Chaos, LFO, Probability-Synced LFO, and Downsampled LFO. At only 4 HP, tágh is a true modulation workhorse. Features Analogue sample and hold Analogue white noise generator (normalled to sample and hold) Six digital random voltage generating algorithms Inbuilt bias and attenuation controls Smart tap tempo follower with manual button Steady and rhythmically-relevant clock generator Internal or external clock options of analogue sample and hold Specifications Width: 4hp Depth: 27mm Power: +40mA / -15mA Manufacturer product page here. Product manual here.

The post Instruo Tagh V2 Eurorack Random Voltage Source Module appeared first on Elevator Sound.

]]> The Instru? tágh is a “Swiss Army Knife” modulation source. It features an analogue sample and hold, digital random voltage generator, morphing LFO, and probabilistic trigger generator, and white noise generator, all with a unique phase-adaptive tap tempo functionality.

After many iterations of random voltage generation experiments, tágh’s 6 algorithms were meticulously curated to meet the needs of the designer. Once realised, it was quick to see its importance in small and big systems alike. These 6 random algorithms include Classic Stepped Random, Repeatable Stepped Random, Chaos, LFO, Probability-Synced LFO, and Downsampled LFO.

At only 4 HP, tágh is a true modulation workhorse.

Features

  • Analogue sample and hold
  • Analogue white noise generator (normalled to sample and hold)
  • Six digital random voltage generating algorithms
  • Inbuilt bias and attenuation controls
  • Smart tap tempo follower with manual button
  • Steady and rhythmically-relevant clock generator
  • Internal or external clock options of analogue sample and hold

Specifications

  • Width: 4hp
  • Depth: 27mm
  • Power: +40mA / -15mA

Manufacturer product page here.
Product manual here.

The post Instruo Tagh V2 Eurorack Random Voltage Source Module appeared first on Elevator Sound.

]]> Instruo Aradh Low Pass Filter, Envelope Follower and VCA Module https://www.elevatorsound.com/product/instruo-aradh-low-pass-filter-envelope-follower-and-vca-module/ Thu, 04 May 2023 11:00:58 +0000 https://www.elevatorsound.com/?post_type=product&p=77370 By popular demand – an exciting new take on the legendary transistor ladder filter. Introducing the Instru? àradh, the long-awaited successor to the first Instru? low pass filter, tràigh. Expanding on tràigh’s classic functionality, àradh adds a VCA with pre or post-filter routing options, an envelope follower, a comparator gate, a strike input with variable decay time, and a plethora of user-definable voltage-controlled parameter combinations. Whether you’re looking for voltage-controlled resonance, pre-gain filter saturation, noise gate functionality, dynamics processing, or even an envelope follower, àradh can get the job done – a true sound-shaping powerhouse in only 6 HP. Features Low pass filter and VCA VCA pre/post-filter routing options Strike input and button User-defined CV input Envelope follower and comparator functionality Self-oscillating resonance Specifications Width: 6hp Depth: 27mm Power: +60mA / -40mA Manufacturer product page here. Product manual here.

The post Instruo Aradh Low Pass Filter, Envelope Follower and VCA Module appeared first on Elevator Sound.

]]> By popular demand – an exciting new take on the legendary transistor ladder filter. Introducing the Instru? àradh, the long-awaited successor to the first Instru? low pass filter, tràigh. Expanding on tràigh’s classic functionality, àradh adds a VCA with pre or post-filter routing options, an envelope follower, a comparator gate, a strike input with variable decay time, and a plethora of user-definable voltage-controlled parameter combinations.

Whether you’re looking for voltage-controlled resonance, pre-gain filter saturation, noise gate functionality, dynamics processing, or even an envelope follower, àradh can get the job done – a true sound-shaping powerhouse in only 6 HP.

Features

  • Low pass filter and VCA
  • VCA pre/post-filter routing options
  • Strike input and button
  • User-defined CV input
  • Envelope follower and comparator functionality
  • Self-oscillating resonance

Specifications

  • Width: 6hp
  • Depth: 27mm
  • Power: +60mA / -40mA

Manufacturer product page here.
Product manual here.

The post Instruo Aradh Low Pass Filter, Envelope Follower and VCA Module appeared first on Elevator Sound.

]]> Instruo Lubadh v2 Expansion Pack Eurorack Module https://www.elevatorsound.com/product/instruo-lubadh-v2-expansion-pack-eurorack-module/ Wed, 23 Nov 2022 12:00:52 +0000 https://www.elevatorsound.com/?post_type=product&p=70042 The Lúbadh V2.0 firmware pack includes everything you need to get started with the new update. Plug and play! A 2HP expander module introduces front access to the Lúbadh’s USB port for extra convenience accessing the new preset functionalities in addition to saving and loading audio samples on the fly. Included is a new USB drive (8GB) which contains the Instruo sample library containing 144 samples produced by the team. There is also a replacement micro SD card included which is pre-flashed with the V2.0 base firmware. This upgrades a Lúbadh module immediately. Features USB expander module USB cable 8GB (white) USB drive containing the Instruo sample library MicroSD card preflashed with the V2.0 firmware V2 quickstart guide Specifications Width: 2hp Depth: 60mm Power: Passive

The post Instruo Lubadh v2 Expansion Pack Eurorack Module appeared first on Elevator Sound.

]]> The Lúbadh V2.0 firmware pack includes everything you need to get started with the new update. Plug and play!

A 2HP expander module introduces front access to the Lúbadh’s USB port for extra convenience accessing the new preset functionalities in addition to saving and loading audio samples on the fly.

Included is a new USB drive (8GB) which contains the Instruo sample library containing 144 samples produced by the team.

There is also a replacement micro SD card included which is pre-flashed with the V2.0 base firmware. This upgrades a Lúbadh module immediately.

Features

  • USB expander module
  • USB cable
  • 8GB (white) USB drive containing the Instruo sample library
  • MicroSD card preflashed with the V2.0 firmware
  • V2 quickstart guide

Specifications

  • Width: 2hp
  • Depth: 60mm
  • Power: Passive

The post Instruo Lubadh v2 Expansion Pack Eurorack Module appeared first on Elevator Sound.

]]> Instruo Carn Eurorack Utility Mixer Module https://www.elevatorsound.com/product/instruo-carn-eurorack-utility-mixer-module/ Wed, 23 Nov 2022 12:00:35 +0000 https://www.elevatorsound.com/?post_type=product&p=70012 At its core, the Instru? càrn is a four channel signal processing utility with distinct functionality and individual outputs per channel. It is optimised for both audio and control voltage signals and offers a voltage-controlled panner with constant power panning, a VCA, a ring modulator, and a signal crossfader – all housed within a compact stereo mixer format. As a mixer, càrn can function as a traditional end-of-chain summing stage with a built-in stereo VCA. It can also seamlessly expand to related stereo Instru? modules via its pair of stereo back jacks and included low profile stereo cable. càrn includes an optional stereo limiter that is perfect for everything between gentle signal softening to saturated drum bus distortion. Whether you need a feature-dense signal processor, a hyper-compact summing mixer, or a soft-clipping signal mangler, càrn will meet the challenge. Features AC & DC coupling options for audio and CV mixing Voltage-controlled constant power panning Two-quadrant linear VCA Four-quadrant VCA (Ring modulation) Final stage stereo VCA Signal crossfading Individual channel outputs with normalling options On-board limiting Back jack connectivity for expansion Specifications Width: 8hp Depth: 27mm Power: +180mA / -180mA Manufacturer product page here. Product manual here.

The post Instruo Carn Eurorack Utility Mixer Module appeared first on Elevator Sound.

]]> At its core, the Instru? càrn is a four channel signal processing utility with distinct functionality and individual outputs per channel. It is optimised for both audio and control voltage signals and offers a voltage-controlled panner with constant power panning, a VCA, a ring modulator, and a signal crossfader – all housed within a compact stereo mixer format.

As a mixer, càrn can function as a traditional end-of-chain summing stage with a built-in stereo VCA. It can also seamlessly expand to related stereo Instru? modules via its pair of stereo back jacks and included low profile stereo cable. càrn includes an optional stereo limiter that is perfect for everything between gentle signal softening to saturated drum bus distortion.

Whether you need a feature-dense signal processor, a hyper-compact summing mixer, or a soft-clipping signal mangler, càrn will meet the challenge.

Features

  • AC & DC coupling options for audio and CV mixing
  • Voltage-controlled constant power panning
  • Two-quadrant linear VCA
  • Four-quadrant VCA (Ring modulation)
  • Final stage stereo VCA
  • Signal crossfading
  • Individual channel outputs with normalling options
  • On-board limiting
  • Back jack connectivity for expansion

Specifications

  • Width: 8hp
  • Depth: 27mm
  • Power: +180mA / -180mA

Manufacturer product page here.
Product manual here.

The post Instruo Carn Eurorack Utility Mixer Module appeared first on Elevator Sound.

]]>