The multiple section of the CV Bus was originally designed in 2013 for Alessandro Cortini’s personal Make Noise system. It provides visual indication of level, rate and polarity for up to 4 control signals that will be shared throughout a patch. These 4 control signals are color coded and distributed across the center of the system allowing for quick, clean and intuitive patching. The distribution method is unlike the typical multiple since the control signals will appear beneath their possible destinations allowing for the use of shorter patch cables. The color coding and visual indication makes navigating complex patches easier and more intuitive. Typically, the CV Bus would be used to share the most important control signals in a patch such as your Master Clock.

This new version of the CV Bus also includes useful modular utilities:

The Voltage Math is found at the left end of the CV Bus. Like the similar circuit on the 0-Coast, it is a small collection of universally useful modular utilities. The two inputs are summed at the output, one at unity and one adjusted by the input attenu-verter. The attenuverted input is also normalled to a DC offset, for purposes of level shifting, voltage mirroring etc. The output strength and polarity is indicated by the Green and Red output LEDs.

A high quality Stereo Line Driver converts powerful modular synthesizer signal levels to the commonly used Line Level. There are mini-jack inputs for Left or Mono, and Right for Stereo sound, a single master volume control, as well as a stereo line output pair, and finally a TRS line/headphone out on a single jack. This output is capable of driving a long cable out to a PA System or a set of Headphones. It is AC coupled with a built-in limiting circuit (with visual indication) that prevents damage to ears and PA system when the patching gets experimental.

Specifications

• Size: 7U
• Total HP: 208 @ 3U, 104 @ 1U
• Outer Dimensions: 56.5cm x 35.5cm x 18cm w/ lid
• Max Module Depth: 64mm
• Weight: 5.78kg (w/ powered bus board, CV Bus installed)
• Power: +12VDC @ 4A, -12VDC @ 2.4A and +5VDC @ 1A
• Connectors: 32
• Includes: CV Bus, Powered Bus Board, 120 Sliding M2.5 nuts w/ Black screws, AC Adapter

Manufacturer product page here.
Product manual here.

The post Make Noise 7U 104hp 4 Zone CV Bus Case appeared first on Elevator Sound.

Equipped with our latest and most sophisticated power supply (Trolley Bus), the Befaco 7U Case supplies up to 5000mA of power.

The rear panel counts with a vast array of connections to pair your system with external devices. Each connector follows the Intellijel format, making them fully compatible with Intellijel’s 1U modules.

Designed with a high-quality Unibody Black Anodised Aluminum frame, the Befaco 7U Case is a slim and sturdy solution to travel with. The included PET-G clear cover keeps your modules safe even patched!

Technical Specifications

• External Dimensions (without cover): 53.5cms x 31cms x 8cms
• External Dimensions (with cover): 53.5cms x 31cms x 14cms
• Internal Row Dimensions: 2x 3U 104HP and 1x 1U 104HP (Intellijel format)
• Power supply Specifications: +12V: 5000mA, -12V: 2500mA, 5V: 4000mA
• Module Depth: 53mm (power supply side), 70mm (rest of the case)
• Module Slots: 36
• Weight (without cover): 2.6kg
• Weight (with cover): 3.4kg
• Rear connectors: 6 x 6.35mm Jack I/O (Balanced or Unbalanced), MIDI DIN In/Out/Thru, USB Device Type B, Apple compatible USB-A charging ports.
• Power brick: 135W 2.5mm Barrel connector center positive (included)
• Cover: PET-G Clear cover (included)
• Finish: Black Anodised Aluminum
• Vesa 100 format threads. Recommended Vesa stand: 12kg
• Kensington Lock

Manufacturer product page here.

The post Befaco 7U Eurorack Case (7U – 104hp – Powered) appeared first on Elevator Sound.

We designed CAIXA 104 to provide a solid base for starting your modular journey and squeezing every centimeter of your system in case you’re already an experienced Eurorack-head.

7 integrated modules are included providing a selection of utilities that everyone usually needs to have in their modular synthesizer, like the Buffered Multiples, the Stereo Mixer or its 2 LFOs. We have also focused on improving connectivity with the integrated inputs and outputs.

18-slot busboard with reversed protection headers.

An efficient and reliable supply which is more than enough to provide plenty of power for a 104HP system (and more).
– +12V output at 1.25A
– -12V output at 1.1A
– +5V output at 0.5A

The maximum module depth above the busboard connectors is 47mm, but you can place modules up to 60mm outside of the busboard space. That should be sufficient to fit the vast majority of modules out there.

We know how hard it is to carry a modular system from one place to another, so we wanted to make it easy for you. The lightweight aluminium, together with the handle, make it super easy to take your modules with you. Weighs only 1.7 Kg!

Features

• Utility Modules
  • Balanced Inputs
  • Buffered Multiples
  • Precision Adder
  • 2 LFOs
  • Sample & Hold
  • Stereo Mixer
  • Stereo & Headphone Out
• Power Specifications
  • 30.7W Integrated switching power supply with Meanwell 60W power brick.
  • +12V output at 1.25A
  • -12V output at 1.1A
  • +5V output at 0.5A
• Construction
  • Dimensions: 535 x 200 x 86 mm
  • Materials: Anodized aluminum
  • Aluminium extruded rails with steel threaded inserts
  • Rubber feet to protect your desktop.
• Depth
  • Maximum module depth: 47 mm inside busboard space, 60mm outside.

Manufacturer product page here.
Product manual here.

The post NANO Modules CAIXA 104 Eurorack Portable Powered Case (104hp) appeared first on Elevator Sound.

Features

• One 104 hp row of Eurorack (3U) module space.
• One 104 hp row of Intellijel (1U) module space.
• Built in triple buffered multiple with bi-polar led level indicators.
• Built in dual precision summers with bi-polar led level indicators.
• Expansion jacks for MIDI and balanced audio i/o.
• Threaded M3 strips for mounting modules.
• High spec 60 Watt power supply capable of powering up to 24 modules with +12 V output at 1500 mA, -12 V output at 1500 mA and +5 V output at 500 mA.
• Utilities Row
  • Triple 1:4 buffered multiple.
  • Dual 2:1 precision summer.
  • Four 1/4? balanced audio (trs) jacks that can be connected to the Stereo Line Out 1U, Stereo Line In 1U, Pedal I/O 1U or Mixup.
  • ?” (3.5mm) MIDI Input that can be connected to MIDI 1U.
  • ?” (3.5mm) MIDI Output that can be connected to MIDI 1U.
  • USB-B port that connects to the MIDI 1U and other future modules.
  • Rocker switch and 2.1mm x 5.5mm barrel plug for power entry.

Specifications
Dimensions: 537.7 x 204.4 x 51.3 (mm) (58.5 mm high, when including rubber feet/jacks)
Max Module Depth: 45.5 mm for middle 102HP, 37.42 mm at each 1HP edge
Power: 1.5A @ 12V, 1.5A @ -12V, 500mA @ +5V, 60W Power Brick, 24 Headers

Manufacturer product page here.
Product manual here.

The post Intellijel Palette 4U 104 Eurorack Powered Case (Black) appeared first on Elevator Sound.

Features

• One 104 hp row of Eurorack (3U) module space.
• One 104 hp row of Intellijel (1U) module space.
• Built in triple buffered multiple with bi-polar led level indicators.
• Built in dual precision summers with bi-polar led level indicators.
• Expansion jacks for MIDI and balanced audio i/o.
• Threaded M3 strips for mounting modules.
• High spec 60 Watt power supply capable of powering up to 24 modules with +12 V output at 1500 mA, -12 V output at 1500 mA and +5 V output at 500 mA.
• Utilities Row
  • Triple 1:4 buffered multiple.
  • Dual 2:1 precision summer.
  • Four 1/4? balanced audio (trs) jacks that can be connected to the Stereo Line Out 1U, Stereo Line In 1U, Pedal I/O 1U or Mixup.
  • ?” (3.5mm) MIDI Input that can be connected to MIDI 1U.
  • ?” (3.5mm) MIDI Output that can be connected to MIDI 1U.
  • USB-B port that connects to the MIDI 1U and other future modules.
  • Rocker switch and 2.1mm x 5.5mm barrel plug for power entry.

Specifications
Dimensions: 537.7 x 204.4 x 51.3 (mm) (58.5 mm high, when including rubber feet/jacks)
Max Module Depth: 45.5 mm for middle 102HP, 37.42 mm at each 1HP edge
Power: 1.5A @ 12V, 1.5A @ -12V, 500mA @ +5V, 60W Power Brick, 24 Headers

Manufacturer product page here.
Product manual here.

The post Intellijel Palette 4U 104 Eurorack Powered Case (Silver) appeared first on Elevator Sound.

PLUS is the first modular case for modular synthesizers. It consists of practical 42HP units that you can combine to create your ideal Eurorack case. These Row Extension units are made of single-body, extruded-aluminum profiles to host modules up to 43mm deep. Once assembled, PLUS becomes a tight and sturdy case for your modules.

Specifications
Width: 42hp
Depth: 43mm

Manufacturer product page here.
Product manual here.

The post Frap Tools PLUS Modular Eurorack Case 42HP Single Unit appeared first on Elevator Sound.

Includes two PLUS windowed units with sliding nuts, as well as the necessary tools (hex screw, wrench, screws, nuts, washers, and pins) to connect the two pieces.

PLUS is the first modular case for modular synthesizers. It consists of practical 42HP units that you can combine to create your ideal Eurorack case. These Row Extension units are made of single-body, extruded-aluminum profiles to host modules up to 43mm deep. Once assembled, PLUS becomes a tight and sturdy case for your modules.

Specifications
Width: 42hp
Depth: 43mm

Manufacturer product page here.

Product manual here.

The post Frap Tools PLUS Modular Eurorack Case 42HP Two Unit Set appeared first on Elevator Sound.

PLUS is the first modular case for modular synthesizers. It consists of practical 42HP units that you can combine to create your ideal Eurorack case. These Row Extension units are made of single-body, extruded-aluminum profiles to host modules up to 43mm deep. Once assembled, PLUS becomes a tight and sturdy case for your modules.

Specifications
Width: 42hp
Depth: 43mm

Manufacturer product page here.
Product manual here.

The post Frap Tools PLUS Modular Eurorack Case 42HP Four Unit Set appeared first on Elevator Sound.

Available in yellow, green and black.

Manufacturer product page here.

Product manual here.

The post Frap Tools PLUS Modular Eurorack Case Aluminium Sides (Yellow) appeared first on Elevator Sound.

Available in yellow, green and black.

Manufacturer product page here.

Product manual here.

The post Frap Tools PLUS Modular Eurorack Case Aluminium Sides (Green) appeared first on Elevator Sound.