If you need even more dirt, there’s a handy +12dB gain switch, to really overdrive the signal. If you want to keep your low-end undistorted, you can switch on the Low-cut filter. A Wet/Dry mix knob gives additional control over how much of the original signal is left in the mix.

Designed with a performance-oriented layout, it has a large knob that controls a seamless high-pass and low-pass filter combination, reminiscent of filter effects found on DJ consoles. This filter is placed after the distortion circuits.
Another performance feature is the filter bypass switch, facilitating instant reintroduction of all frequencies into the mix upon release—a great tool for live performers.

Of course there is CV control over the Low and High cutoff, and the Drive gain amount, so using CV you can also use the module as a stereo filter and VCA.

A level knob sets the volume of the outputs, making it easy to integrate the module as an end-of-chain FX, or to set the level of the return when using the module as an AUX bus FX.

Specifications

• Width: 8hp
• Depth: 27mm
• Power: +12V 90mA / -12V 80mA

Manufacturer product page here.

The post Cosmotronic Aphelion Eurorack Stereo Distortion, Filter and VCA Module (Black) appeared first on Elevator Sound.

If you need even more dirt, there’s a handy +12dB gain switch, to really overdrive the signal. If you want to keep your low-end undistorted, you can switch on the Low-cut filter. A Wet/Dry mix knob gives additional control over how much of the original signal is left in the mix.

Designed with a performance-oriented layout, it has a large knob that controls a seamless high-pass and low-pass filter combination, reminiscent of filter effects found on DJ consoles. This filter is placed after the distortion circuits.
Another performance feature is the filter bypass switch, facilitating instant reintroduction of all frequencies into the mix upon release—a great tool for live performers.

Of course there is CV control over the Low and High cutoff, and the Drive gain amount, so using CV you can also use the module as a stereo filter and VCA.

A level knob sets the volume of the outputs, making it easy to integrate the module as an end-of-chain FX, or to set the level of the return when using the module as an AUX bus FX.

Specifications

• Width: 8hp
• Depth: 27mm
• Power: +12V 90mA / -12V 80mA

Manufacturer product page here.

The post Cosmotronic Aphelion Eurorack Stereo Distortion, Filter and VCA Module (Silver) appeared first on Elevator Sound.

Features

• Up to 1kHz of frequency shifting available via the internal oscillator
• Bipolar CV and linear FM inputs for the refence oscillator
• Sum and difference outputs allow for both upwards and downwards frequency shifting

Specifications

• Width: 18hp
• Depth: 45mm
• Power: +12V 50mA / -12V 44mA

Manufacturer product page here.

The post Buchla and TipTop Audio 285t Eurorack Frequency Shifter Module appeared first on Elevator Sound.

The foundation of Stardust is a stereo looper with all the essential controls to record and manipulate sound, while supporting click-less looping transitions, an ultra-low noise floor, and high-fidelity audio hardware. However, getting the perfect loop is only half of the equation – Stardust also focuses on the texture and vibe of your recordings. Dial in nostalgic warmth with wow & flutter / tape hiss controls, or take Stardust to new horizons with out-of-this-world DSP effects. And, much like the tape-machines of yore, Stardust can splice and rearrange its loops at the twist of a knob.

With an impressive set of front panel controls, the ability to save, recall, or export recordings, load samples via an included USB flash drive, and a host of configurable settings via our web editor Narwhal, Stardust is an all-encompassing looper device. Reach out into the vast unknown, one overdub at a time.

Features

• Cosmic stereo tape looper
• Click-less looping: up to 10 minutes max mono, 5 minutes max stereo
• High-Fidelity Audio: 48kHz, 32-bit internal, 24-bit hardware, ultra-low noise floor
• Save, recall, import and export recordings via USB drive
• Wow & Flutter, Tape Hiss, Vintage Saturation, Reverb, and other DSP effects onboard
• Built on the Daisy platform for continued official updates, and community firmware hacking

Specifications

• Width: 18hp
• Depth: 22mm
• Power: +12V 170mA / -12V 15mA

Manufacturer product page here.

The post Qu-Bit Electronix Stardust Eurorack Stereo Looper Module appeared first on Elevator Sound.

Features

• True Stereo Filter Core: Independent left and right processing with simultaneous LP, BP, and HP outputs.
• Crossfade Functionality: Seamless transitions between LP, BP, and HP modes.
• Mild and Wild Resonance Modes: Switch between classic warmth and high-distortion resonance.
• Built-In Stereo VCA: Integrated VCA with soft clipping and dynamic CV control.
• Dedicated Stereo Spread Controls: Independent FREQ, RES, and MODE Span knobs to deepen stereo imaging.
• Extensive CV Inputs: Full CV control with attenuverters for frequency, resonance, and mode, plus CV for span parameters.

Specifications

• Width: 14hp
• Depth: 40mm
• Power: +12V 100mA / -12V 100mA

Manufacturer product page here.

The post NANO Modules ST-FONT Eurorack Stereo Liquid Filter Module appeared first on Elevator Sound.

Depending on the Sibilla uploaded firmware, EXP-FX can either act as an actual Sibilla expander, giving you direct control on more Sibilla’s parameters, or can turn your module into an effect, allowing you to process your favourite oscillator the same way Sibilla processes its internal waveforms.

EXP (il Sole)
Expands your Sibilla by giving you more control on the internal AR envelope and filter resonant frequency.

FX (la Luna)
With configurable eurorack/line stereo inputs, turns your Sibilla into an intricate stereo pitch shifting delay effect. Split your incoming sound in two separate pitch shifted tracks whose stereophony is affected by LFOs movements, white noise, delay lines and sampled bits of audio.

Specifications

• Width: 6hp
• Depth: 18mm

EXP-FX doesn’t draw current directly from your system but relies on Sibilla’s power; for this reason, depending on the uploaded firmware, Sibilla’s power consumption will change as follows:

• Sibilla + EXP: +12V 140mA / -12V 33mA
• Sibilla + FX: +12V 142mA / -12V 35mA

Manufacturer product page here.

The post Clatters Machines EXP-FX Sibilla Expander Eurorack Module (Black) appeared first on Elevator Sound.

Features

• Four Band CV controllable EQ.
• Individual inputs per Band.
• Return inputs.
• Level and Peak LEDs.

Specifications

• Width: 8hp
• Depth: 30mm
• Power: +12v 80mA / -12v 70mA

Manufacturer product page here.
Product manual here.

The post Befaco Bandit Eurorack Multi Band Mixer Filter Module appeared first on Elevator Sound.

Depending on the Sibilla uploaded firmware, EXP-FX can either act as an actual Sibilla expander, giving you direct control on more Sibilla’s parameters, or can turn your module into an effect, allowing you to process your favourite oscillator the same way Sibilla processes its internal waveforms.

EXP (il Sole)
Expands your Sibilla by giving you more control on the internal AR envelope and filter resonant frequency.

FX (la Luna)
With configurable eurorack/line stereo inputs, turns your Sibilla into an intricate stereo pitch shifting delay effect. Split your incoming sound in two separate pitch shifted tracks whose stereophony is affected by LFOs movements, white noise, delay lines and sampled bits of audio.

Specifications

• Width: 6hp
• Depth: 18mm

EXP-FX doesn’t draw current directly from your system but relies on Sibilla’s power; for this reason, depending on the uploaded firmware, Sibilla’s power consumption will change as follows:

• Sibilla + EXP: +12V 140mA / -12V 33mA
• Sibilla + FX: +12V 142mA / -12V 35mA

Manufacturer product page here.

The post Clatters Machines EXP-FX Sibilla Expander Eurorack Module (Silver) appeared first on Elevator Sound.

When these feedback oscillations mix with an incoming waveform some unpredictable and unique nonlinear timbres can be achieved. The module can also be used as a no-input experimental oscillator with the feedback switch engaged. All diodes in the module are silicon.

Specifications

• Width: 4hp
• Depth: 47mm
• Power: +12V 40mA / -12V 35mA

Manufacturer product page here.

The post Zlob Modular Foldiplier Eurorack Harmonic Generator Waveshaper Module appeared first on Elevator Sound.

Specifications

• Width: 16hp
• Depth: 45mm
• Power: +12V 75mA / -12V 75mA

Manufacturer product page here.

The post Zlob Modular VC F3DB Eurorack Fixed Filter Bank Module appeared first on Elevator Sound.