Distortion Archives - Elevator Sound https://www.elevatorsound.com/product-category/modular/modular-effects/modular-effects-distortion/ Eurorack Modular, Synthesizer & Electronic Music Hardware Store Fri, 29 Nov 2024 16:10:00 +0000 en-GB hourly 1 https://wordpress.org/?v=6.7.1 Cosmotronic Aphelion Eurorack Stereo Distortion, Filter and VCA Module (Black) https://www.elevatorsound.com/product/cosmotronic-aphelion-eurorack-stereo-distortion-filter-and-vca-module/ Fri, 22 Nov 2024 00:00:40 +0000 https://www.elevatorsound.com/?post_type=product&p=94969 Aphelion packs a fully analog stereo distortion and DJ-style filter into a compact 8HP design, making it ideal for both live performances and studio setups. It features three independent distortion circuits: a soft clipping overdrive, a saturating wavefolder, and a RAT-inspired distortion. You can seamlessly interpolate between these using the Character knob or a CV signal, offering a wide spectrum of distortion from subtle warmth to aggressive grit. If you need even more dirt, there’s a handy +12dB gain switch, to really overdrive the signal. If you want to keep your low-end undistorted, you can switch on the Low-cut filter. A Wet/Dry mix knob gives additional control over how much of the original signal is left in the mix. Designed with a performance-oriented layout, it has a large knob that controls a seamless high-pass and low-pass filter combination, reminiscent of filter effects found on DJ consoles. This filter is placed after the distortion circuits. Another performance feature is the filter bypass switch, facilitating instant reintroduction of all frequencies into the mix upon release—a great tool for live performers. Of course there is CV control over the Low and High cutoff, and the Drive gain amount, so using CV you can […]

The post Cosmotronic Aphelion Eurorack Stereo Distortion, Filter and VCA Module (Black) appeared first on Elevator Sound.

]]> Aphelion packs a fully analog stereo distortion and DJ-style filter into a compact 8HP design, making it ideal for both live performances and studio setups. It features three independent distortion circuits: a soft clipping overdrive, a saturating wavefolder, and a RAT-inspired distortion. You can seamlessly interpolate between these using the Character knob or a CV signal, offering a wide spectrum of distortion from subtle warmth to aggressive grit.

If you need even more dirt, there’s a handy +12dB gain switch, to really overdrive the signal. If you want to keep your low-end undistorted, you can switch on the Low-cut filter. A Wet/Dry mix knob gives additional control over how much of the original signal is left in the mix.

Designed with a performance-oriented layout, it has a large knob that controls a seamless high-pass and low-pass filter combination, reminiscent of filter effects found on DJ consoles. This filter is placed after the distortion circuits.
Another performance feature is the filter bypass switch, facilitating instant reintroduction of all frequencies into the mix upon release—a great tool for live performers.

Of course there is CV control over the Low and High cutoff, and the Drive gain amount, so using CV you can also use the module as a stereo filter and VCA.

A level knob sets the volume of the outputs, making it easy to integrate the module as an end-of-chain FX, or to set the level of the return when using the module as an AUX bus FX.

Specifications

  • Width: 8hp
  • Depth: 27mm
  • Power: +12V 90mA / -12V 80mA

Manufacturer product page here.

The post Cosmotronic Aphelion Eurorack Stereo Distortion, Filter and VCA Module (Black) appeared first on Elevator Sound.

]]> Cosmotronic Aphelion Eurorack Stereo Distortion, Filter and VCA Module (Silver) https://www.elevatorsound.com/product/cosmotronic-aphelion-eurorack-stereo-distortion-filter-and-vca-module-silver/ Fri, 22 Nov 2024 00:00:44 +0000 https://www.elevatorsound.com/?post_type=product&p=94974 Aphelion packs a fully analog stereo distortion and DJ-style filter into a compact 8HP design, making it ideal for both live performances and studio setups. It features three independent distortion circuits: a soft clipping overdrive, a saturating wavefolder, and a RAT-inspired distortion. You can seamlessly interpolate between these using the Character knob or a CV signal, offering a wide spectrum of distortion from subtle warmth to aggressive grit. If you need even more dirt, there’s a handy +12dB gain switch, to really overdrive the signal. If you want to keep your low-end undistorted, you can switch on the Low-cut filter. A Wet/Dry mix knob gives additional control over how much of the original signal is left in the mix. Designed with a performance-oriented layout, it has a large knob that controls a seamless high-pass and low-pass filter combination, reminiscent of filter effects found on DJ consoles. This filter is placed after the distortion circuits. Another performance feature is the filter bypass switch, facilitating instant reintroduction of all frequencies into the mix upon release—a great tool for live performers. Of course there is CV control over the Low and High cutoff, and the Drive gain amount, so using CV you can […]

The post Cosmotronic Aphelion Eurorack Stereo Distortion, Filter and VCA Module (Silver) appeared first on Elevator Sound.

]]> Aphelion packs a fully analog stereo distortion and DJ-style filter into a compact 8HP design, making it ideal for both live performances and studio setups. It features three independent distortion circuits: a soft clipping overdrive, a saturating wavefolder, and a RAT-inspired distortion. You can seamlessly interpolate between these using the Character knob or a CV signal, offering a wide spectrum of distortion from subtle warmth to aggressive grit.

If you need even more dirt, there’s a handy +12dB gain switch, to really overdrive the signal. If you want to keep your low-end undistorted, you can switch on the Low-cut filter. A Wet/Dry mix knob gives additional control over how much of the original signal is left in the mix.

Designed with a performance-oriented layout, it has a large knob that controls a seamless high-pass and low-pass filter combination, reminiscent of filter effects found on DJ consoles. This filter is placed after the distortion circuits.
Another performance feature is the filter bypass switch, facilitating instant reintroduction of all frequencies into the mix upon release—a great tool for live performers.

Of course there is CV control over the Low and High cutoff, and the Drive gain amount, so using CV you can also use the module as a stereo filter and VCA.

A level knob sets the volume of the outputs, making it easy to integrate the module as an end-of-chain FX, or to set the level of the return when using the module as an AUX bus FX.

Specifications

  • Width: 8hp
  • Depth: 27mm
  • Power: +12V 90mA / -12V 80mA

Manufacturer product page here.

The post Cosmotronic Aphelion Eurorack Stereo Distortion, Filter and VCA Module (Silver) appeared first on Elevator Sound.

]]> Zlob Modular Foldiplier Eurorack Harmonic Generator Waveshaper Module https://www.elevatorsound.com/product/zlob-modular-foldiplier-eurorack-harmonic-generator-waveshaper-module/ Sat, 17 Aug 2024 12:03:26 +0000 https://www.elevatorsound.com/?post_type=product&p=92786 The Foldiplier is a 4hp odd/even harmonics generator with 2 different oscillating feedback paths. The folding core of the design originates from the odd harmonics (middle)section of the Serge Wave Multiplier, but the Foldiplier adds voltage control over the symmetry and offset as well as a switch for feedback, jumper selectable between, a transistor based oscillating fuzz inspired by the Hemmo Bazz Fuss with a lot more low harmonic content and a passive oscillating half wave rectification circuit with more high harmonic content. When these feedback oscillations mix with an incoming waveform some unpredictable and unique nonlinear timbres can be achieved. The module can also be used as a no-input experimental oscillator with the feedback switch engaged. All diodes in the module are silicon. Specifications Width: 4hp Depth: 47mm Power: +12V 40mA / -12V 35mA Manufacturer product page here.

The post Zlob Modular Foldiplier Eurorack Harmonic Generator Waveshaper Module appeared first on Elevator Sound.

]]> The Foldiplier is a 4hp odd/even harmonics generator with 2 different oscillating feedback paths. The folding core of the design originates from the odd harmonics (middle)section of the Serge Wave Multiplier, but the Foldiplier adds voltage control over the symmetry and offset as well as a switch for feedback, jumper selectable between, a transistor based oscillating fuzz inspired by the Hemmo Bazz Fuss with a lot more low harmonic content and a passive oscillating half wave rectification circuit with more high harmonic content.

When these feedback oscillations mix with an incoming waveform some unpredictable and unique nonlinear timbres can be achieved. The module can also be used as a no-input experimental oscillator with the feedback switch engaged. All diodes in the module are silicon.

Specifications

  • Width: 4hp
  • Depth: 47mm
  • Power: +12V 40mA / -12V 35mA

Manufacturer product page here.

The post Zlob Modular Foldiplier Eurorack Harmonic Generator Waveshaper Module appeared first on Elevator Sound.

]]> Schlappi Engineering BTFLD Eurorack Distortion Module (Silver) https://www.elevatorsound.com/product/schlappi-engineering-btfld-eurorack-distortion-module-silver/ Fri, 25 Oct 2024 11:00:54 +0000 https://www.elevatorsound.com/?post_type=product&p=94343 BTFLD (Bit Fold) is a distortion, wavefolder, and four bit asynchronous analog to digital converter. The folding output at audio rate provides a hard sync like timbre in a unique sawtooth wavefolder circuit. The stepped output is a type of bit crushed effect and the square wave outputs provide different frequency multiplications or distortions. Rhythms can also be generated by putting envelopes or LFOs into the input and using the bit outputs as gates. It can also be paired with the rest of our four bit binary system (Nibbler, BTMX) for experiments in four bit computing and unusual logic based patching. Features 6 related outputs Unique wave-folding circuit Switched range for bipolar audio signals or unipolar modulation signals Acts as distortion/wave-folder or rhythm generator depending on input 4 bit binary output interfaces with other logic modules LED indication for every input and output Specifications Width: 6hp Depth: 35mm Power: +12V 26mA / -12V 10mA Manufacturer product page here.

The post Schlappi Engineering BTFLD Eurorack Distortion Module (Silver) appeared first on Elevator Sound.

]]> BTFLD (Bit Fold) is a distortion, wavefolder, and four bit asynchronous analog to digital converter. The folding output at audio rate provides a hard sync like timbre in a unique sawtooth wavefolder circuit.

The stepped output is a type of bit crushed effect and the square wave outputs provide different frequency multiplications or distortions.

Rhythms can also be generated by putting envelopes or LFOs into the input and using the bit outputs as gates.

It can also be paired with the rest of our four bit binary system (Nibbler, BTMX) for experiments in four bit computing and unusual logic based patching.

Features

  • 6 related outputs
  • Unique wave-folding circuit
  • Switched range for bipolar audio signals or unipolar modulation signals
  • Acts as distortion/wave-folder or rhythm generator depending on input
  • 4 bit binary output interfaces with other logic modules
  • LED indication for every input and output

Specifications

  • Width: 6hp
  • Depth: 35mm
  • Power: +12V 26mA / -12V 10mA

Manufacturer product page here.

The post Schlappi Engineering BTFLD Eurorack Distortion Module (Silver) appeared first on Elevator Sound.

]]> Schlappi Engineering BTFLD Eurorack Distortion Module (Black) https://www.elevatorsound.com/product/schlappi-engineering-btfld-eurorack-distortion-module-black/ Fri, 25 Oct 2024 11:00:23 +0000 https://www.elevatorsound.com/?post_type=product&p=94340 BTFLD (Bit Fold) is a distortion, wavefolder, and four bit asynchronous analog to digital converter. The folding output at audio rate provides a hard sync like timbre in a unique sawtooth wavefolder circuit. The stepped output is a type of bit crushed effect and the square wave outputs provide different frequency multiplications or distortions. Rhythms can also be generated by putting envelopes or LFOs into the input and using the bit outputs as gates. It can also be paired with the rest of our four bit binary system (Nibbler, BTMX) for experiments in four bit computing and unusual logic based patching. Features 6 related outputs Unique wave-folding circuit Switched range for bipolar audio signals or unipolar modulation signals Acts as distortion/wave-folder or rhythm generator depending on input 4 bit binary output interfaces with other logic modules LED indication for every input and output Specifications Width: 6hp Depth: 35mm Power: +12V 26mA / -12V 10mA Manufacturer product page here.

The post Schlappi Engineering BTFLD Eurorack Distortion Module (Black) appeared first on Elevator Sound.

]]> BTFLD (Bit Fold) is a distortion, wavefolder, and four bit asynchronous analog to digital converter. The folding output at audio rate provides a hard sync like timbre in a unique sawtooth wavefolder circuit.

The stepped output is a type of bit crushed effect and the square wave outputs provide different frequency multiplications or distortions.

Rhythms can also be generated by putting envelopes or LFOs into the input and using the bit outputs as gates.

It can also be paired with the rest of our four bit binary system (Nibbler, BTMX) for experiments in four bit computing and unusual logic based patching.

Features

  • 6 related outputs
  • Unique wave-folding circuit
  • Switched range for bipolar audio signals or unipolar modulation signals
  • Acts as distortion/wave-folder or rhythm generator depending on input
  • 4 bit binary output interfaces with other logic modules
  • LED indication for every input and output

Specifications

  • Width: 6hp
  • Depth: 35mm
  • Power: +12V 26mA / -12V 10mA

Manufacturer product page here.

The post Schlappi Engineering BTFLD Eurorack Distortion Module (Black) appeared first on Elevator Sound.

]]> Ohmforce Ohmicide Eurorack Multiband Distortion Module https://www.elevatorsound.com/product/ohmforce-ohmicide-eurorack-multiband-distortion-module/ Mon, 20 May 2024 12:56:49 +0000 https://www.elevatorsound.com/?post_type=product&p=90580 Ohmicide Eurorack is an adaptation of the legendary distortion plugin that defined the now well populated category of “shaper” effects. Amongst the numerous things that made it a hallmark plugin was the carefully crafted distortion library covering all things known and many more unknown. All of those 111 distortions are now ready to burn your finger tips in a remarkably versatile module delivering huge sonic possibilities, and let you change the texture of your VCOs, drums and samples in subtle or brutally unsubtle ways. Use all sorts of distortions, including bitcrusher, freezer, filtering and jellyfish variety. Specifications Width: 14hp Depth: 26mm Power: +12v 120mA / -12v 10mA Manufacturer product page here. Product manual here.

The post Ohmforce Ohmicide Eurorack Multiband Distortion Module appeared first on Elevator Sound.

]]> Ohmicide Eurorack is an adaptation of the legendary distortion plugin that defined the now well populated category of “shaper” effects. Amongst the numerous things that made it a hallmark plugin was the carefully crafted distortion library covering all things known and many more unknown. All of those 111 distortions are now ready to burn your finger tips in a remarkably versatile module delivering huge sonic possibilities, and let you change the texture of your VCOs, drums and samples in subtle or brutally unsubtle ways. Use all sorts of distortions, including bitcrusher, freezer, filtering and jellyfish variety.

Specifications

  • Width: 14hp
  • Depth: 26mm
  • Power: +12v 120mA / -12v 10mA

Manufacturer product page here.
Product manual here.

The post Ohmforce Ohmicide Eurorack Multiband Distortion Module appeared first on Elevator Sound.

]]> 333 Modules Dual PT Double Delay, Glitch and Trash Eurorack Module https://www.elevatorsound.com/product/333-modules-dual-pt-double-delay-glitch-and-trash-eurorack-module/ Thu, 07 Mar 2024 13:21:00 +0000 https://www.elevatorsound.com/?post_type=product&p=88682 PT Double module with a wide variety of modulation effects (Reverb Delay, Echo, etc…) and experimental character based on two PT2399 chips mounted in series, with its characteristic sound and with 4 different feedback points (2 pre FX and 2 post FX) and two voltage-controlled delay times. A specialist in destroying signals and taking them to noisy terrain, thanks to its four feedback points it is capable of generating autonomous drone-distortion audio signals. Specs Width: 8 HP Power: 124 mA +12V 26 mA -12V 0 mA 5V Manufacturer Product Page HERE

The post 333 Modules Dual PT Double Delay, Glitch and Trash Eurorack Module appeared first on Elevator Sound.

]]> PT Double module with a wide variety of modulation effects (Reverb Delay, Echo, etc…) and experimental character based on two PT2399 chips mounted in series, with its characteristic sound and with 4 different feedback points (2 pre FX and 2 post FX) and two voltage-controlled delay times. A specialist in destroying signals and taking them to noisy terrain, thanks to its four feedback points it is capable of generating autonomous drone-distortion audio signals.

Specs
Width: 8 HP
Power: 124 mA +12V
26 mA -12V
0 mA 5V

Manufacturer Product Page HERE

The post 333 Modules Dual PT Double Delay, Glitch and Trash Eurorack Module appeared first on Elevator Sound.

]]> Happy Nerding FX Aid 1U Eurorack Multi FX Module (Black) https://www.elevatorsound.com/product/happy-nerding-fx-aid-1u-eurorack-multi-fx-module-black/ Sat, 02 Dec 2023 15:59:55 +0000 https://www.elevatorsound.com/?post_type=product&p=86176 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets – stores selected program and all three controls. Spin FV-1 based. Intellijel format 1U. The last used effect, assigns and presets are always remembered. 32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order. Reflashing procedure is quite easy: playing 40 sec long “wav” file of line level amplitude to CV input. Reflashing mode: hold both buttons for 10 sec. By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 2000 Hz or brought up to 48 kHz. Specifications Width: 24hp Depth: 40mm Power: +80mA, -30mA Manufacturer product page here. Product manual here.

The post Happy Nerding FX Aid 1U Eurorack Multi FX Module (Black) appeared first on Elevator Sound.

]]> 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets – stores selected program and all three controls. Spin FV-1 based. Intellijel format 1U.

The last used effect, assigns and presets are always remembered. 32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order. Reflashing procedure is quite easy: playing 40 sec long “wav” file of line level amplitude to CV input. Reflashing mode: hold both buttons for 10 sec. By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 2000 Hz or brought up to 48 kHz.

Specifications
Width: 24hp
Depth: 40mm
Power: +80mA, -30mA
Manufacturer product page here.
Product manual here.

The post Happy Nerding FX Aid 1U Eurorack Multi FX Module (Black) appeared first on Elevator Sound.

]]> Happy Nerding FX Aid 1U Eurorack Multi FX Module (Silver) https://www.elevatorsound.com/product/happy-nerding-fx-aid-1u-eurorack-multi-fx-module-silver/ Sat, 02 Dec 2023 15:54:28 +0000 https://www.elevatorsound.com/?post_type=product&p=86169 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets – stores selected program and all three controls. Spin FV-1 based. Intellijel format 1U. The last used effect, assigns and presets are always remembered. 32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order. Reflashing procedure is quite easy: playing 40 sec long “wav” file of line level amplitude to CV input. Reflashing mode: hold both buttons for 10 sec. By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 2000 Hz or brought up to 48 kHz. Specifications Width: 24hp Depth: 40mm Power: +80mA, -30mA Manufacturer product page here. Product manual here.

The post Happy Nerding FX Aid 1U Eurorack Multi FX Module (Silver) appeared first on Elevator Sound.

]]> 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets – stores selected program and all three controls. Spin FV-1 based. Intellijel format 1U.

The last used effect, assigns and presets are always remembered. 32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order. Reflashing procedure is quite easy: playing 40 sec long “wav” file of line level amplitude to CV input. Reflashing mode: hold both buttons for 10 sec. By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 2000 Hz or brought up to 48 kHz.

Specifications
Width: 24hp
Depth: 40mm
Power: +80mA, -30mA
Manufacturer product page here.
Product manual here.

The post Happy Nerding FX Aid 1U Eurorack Multi FX Module (Silver) appeared first on Elevator Sound.

]]> Befaco FX Boy Eurorack Multi-FX Module https://www.elevatorsound.com/product/befaco-fx-boy-eurorack-multi-fx-module/ Wed, 18 Oct 2023 11:00:10 +0000 https://www.elevatorsound.com/?post_type=product&p=83862 FxBoy is a multi-FX module designed in collaboration with several talented manufacturers. This is an effect unit with CV control over the parameters and Dry/wet control, with a Built-in CV controllable four bands EQ. The FX-Boy ships with the ‘Founders Cartridge Park’ with 7 custom effects designed by various synth companies. Each effect is physically hosted in a hot-swappable game cart and designed by a different manufacturer: Touell Skouarn with Skuara a harsh fuzz with overdrive, Instruo with micro Phaser, a two-flavoured Phaser, Feedback modules with a vintage Flanger, XOR with FX-Girl, a digital double effect module: Delay + Granularizer, Making sound machines with an analog Wave folder, Tesseract with a bit crusher and Befaco Trash distortion! Features CV control over all parameters and Dry/wet CV controllable four-band EQ, routable post or pre-effect. Selector for two different flavours of each cart. Open specifications to design your own carts Hot swap for all carts. (A tiny pop can occur depending on the cartridge design) Specifications Width: 12hp Depth: 35mm Power: +125mA, -100mA Manufacturer product page here. Product manual here.

The post Befaco FX Boy Eurorack Multi-FX Module appeared first on Elevator Sound.

]]> FxBoy is a multi-FX module designed in collaboration with several talented manufacturers. This is an effect unit with CV control over the parameters and Dry/wet control, with a Built-in CV controllable four bands EQ. The FX-Boy ships with the ‘Founders Cartridge Park’ with 7 custom effects designed by various synth companies.

Each effect is physically hosted in a hot-swappable game cart and designed by a different manufacturer: Touell Skouarn with Skuara a harsh fuzz with overdrive, Instruo with micro Phaser, a two-flavoured Phaser, Feedback modules with a vintage Flanger, XOR with FX-Girl, a digital double effect module: Delay + Granularizer, Making sound machines with an analog Wave folder, Tesseract with a bit crusher and Befaco Trash distortion!

Features

  • CV control over all parameters and Dry/wet
  • CV controllable four-band EQ, routable post or pre-effect.
  • Selector for two different flavours of each cart.
  • Open specifications to design your own carts
  • Hot swap for all carts. (A tiny pop can occur depending on the cartridge design)

Specifications
Width: 12hp
Depth: 35mm
Power: +125mA, -100mA

Manufacturer product page here.
Product manual here.

The post Befaco FX Boy Eurorack Multi-FX Module appeared first on Elevator Sound.

]]>