If you need even more dirt, there’s a handy +12dB gain switch, to really overdrive the signal. If you want to keep your low-end undistorted, you can switch on the Low-cut filter. A Wet/Dry mix knob gives additional control over how much of the original signal is left in the mix.

Designed with a performance-oriented layout, it has a large knob that controls a seamless high-pass and low-pass filter combination, reminiscent of filter effects found on DJ consoles. This filter is placed after the distortion circuits.
Another performance feature is the filter bypass switch, facilitating instant reintroduction of all frequencies into the mix upon release—a great tool for live performers.

Of course there is CV control over the Low and High cutoff, and the Drive gain amount, so using CV you can also use the module as a stereo filter and VCA.

A level knob sets the volume of the outputs, making it easy to integrate the module as an end-of-chain FX, or to set the level of the return when using the module as an AUX bus FX.

Specifications

• Width: 8hp
• Depth: 27mm
• Power: +12V 90mA / -12V 80mA

Manufacturer product page here.

The post Cosmotronic Aphelion Eurorack Stereo Distortion, Filter and VCA Module (Black) appeared first on Elevator Sound.

If you need even more dirt, there’s a handy +12dB gain switch, to really overdrive the signal. If you want to keep your low-end undistorted, you can switch on the Low-cut filter. A Wet/Dry mix knob gives additional control over how much of the original signal is left in the mix.

Designed with a performance-oriented layout, it has a large knob that controls a seamless high-pass and low-pass filter combination, reminiscent of filter effects found on DJ consoles. This filter is placed after the distortion circuits.
Another performance feature is the filter bypass switch, facilitating instant reintroduction of all frequencies into the mix upon release—a great tool for live performers.

Of course there is CV control over the Low and High cutoff, and the Drive gain amount, so using CV you can also use the module as a stereo filter and VCA.

A level knob sets the volume of the outputs, making it easy to integrate the module as an end-of-chain FX, or to set the level of the return when using the module as an AUX bus FX.

Specifications

• Width: 8hp
• Depth: 27mm
• Power: +12V 90mA / -12V 80mA

Manufacturer product page here.

The post Cosmotronic Aphelion Eurorack Stereo Distortion, Filter and VCA Module (Silver) appeared first on Elevator Sound.

Features

• True Stereo Filter Core: Independent left and right processing with simultaneous LP, BP, and HP outputs.
• Crossfade Functionality: Seamless transitions between LP, BP, and HP modes.
• Mild and Wild Resonance Modes: Switch between classic warmth and high-distortion resonance.
• Built-In Stereo VCA: Integrated VCA with soft clipping and dynamic CV control.
• Dedicated Stereo Spread Controls: Independent FREQ, RES, and MODE Span knobs to deepen stereo imaging.
• Extensive CV Inputs: Full CV control with attenuverters for frequency, resonance, and mode, plus CV for span parameters.

Specifications

• Width: 14hp
• Depth: 40mm
• Power: +12V 100mA / -12V 100mA

Manufacturer product page here.

The post NANO Modules ST-FONT Eurorack Stereo Liquid Filter Module appeared first on Elevator Sound.

Depending on the Sibilla uploaded firmware, EXP-FX can either act as an actual Sibilla expander, giving you direct control on more Sibilla’s parameters, or can turn your module into an effect, allowing you to process your favourite oscillator the same way Sibilla processes its internal waveforms.

EXP (il Sole)
Expands your Sibilla by giving you more control on the internal AR envelope and filter resonant frequency.

FX (la Luna)
With configurable eurorack/line stereo inputs, turns your Sibilla into an intricate stereo pitch shifting delay effect. Split your incoming sound in two separate pitch shifted tracks whose stereophony is affected by LFOs movements, white noise, delay lines and sampled bits of audio.

Specifications

• Width: 6hp
• Depth: 18mm

EXP-FX doesn’t draw current directly from your system but relies on Sibilla’s power; for this reason, depending on the uploaded firmware, Sibilla’s power consumption will change as follows:

• Sibilla + EXP: +12V 140mA / -12V 33mA
• Sibilla + FX: +12V 142mA / -12V 35mA

Manufacturer product page here.

The post Clatters Machines EXP-FX Sibilla Expander Eurorack Module (Black) appeared first on Elevator Sound.

Features

• Four Band CV controllable EQ.
• Individual inputs per Band.
• Return inputs.
• Level and Peak LEDs.

Specifications

• Width: 8hp
• Depth: 30mm
• Power: +12v 80mA / -12v 70mA

Manufacturer product page here.
Product manual here.

The post Befaco Bandit Eurorack Multi Band Mixer Filter Module appeared first on Elevator Sound.

Depending on the Sibilla uploaded firmware, EXP-FX can either act as an actual Sibilla expander, giving you direct control on more Sibilla’s parameters, or can turn your module into an effect, allowing you to process your favourite oscillator the same way Sibilla processes its internal waveforms.

EXP (il Sole)
Expands your Sibilla by giving you more control on the internal AR envelope and filter resonant frequency.

FX (la Luna)
With configurable eurorack/line stereo inputs, turns your Sibilla into an intricate stereo pitch shifting delay effect. Split your incoming sound in two separate pitch shifted tracks whose stereophony is affected by LFOs movements, white noise, delay lines and sampled bits of audio.

Specifications

• Width: 6hp
• Depth: 18mm

EXP-FX doesn’t draw current directly from your system but relies on Sibilla’s power; for this reason, depending on the uploaded firmware, Sibilla’s power consumption will change as follows:

• Sibilla + EXP: +12V 140mA / -12V 33mA
• Sibilla + FX: +12V 142mA / -12V 35mA

Manufacturer product page here.

The post Clatters Machines EXP-FX Sibilla Expander Eurorack Module (Silver) appeared first on Elevator Sound.

Specifications

• Width: 16hp
• Depth: 45mm
• Power: +12V 75mA / -12V 75mA

Manufacturer product page here.

The post Zlob Modular VC F3DB Eurorack Fixed Filter Bank Module appeared first on Elevator Sound.

There are also several jumper selectable modes for max resonance, self oscillation or no oscillation based on the setting of the resonance pot. According to the jumper configuration, the filter is capable of clinical and clean, to juicy and drippy, to low pass gate sounding plonks, to screaming chaotic resonance. When set to self oscillation mode, the filter can produce a sine like wave with no input and a trapezoid like wave in the max resonance jumper setting. In max resonance mode, the filter output can exceed 10Vpp. On the newest version, there is a trimmer on the top pcb to set the lowest cutoff frequency.

Specifications

• Width: 4hp
• Depth: 46mm
• Power: +12V 15mA / -12V 15mA

Manufacturer product page here.

The post Zlob Modular SVF Eurorack Pingable Filter Module appeared first on Elevator Sound.

Specifications

• Width: 8hp
• Depth: 27mm
• Power: +12V 30mA / -12V 30mA

Manufacturer product page here.
Product manual here.

The post Hikari Instruments Ping Filter Eurorack Waveshaper Filter Module appeared first on Elevator Sound.

Meta is the all-in-one solution for creating smooth transitions, exciting drops, and other creative live performance effects. Meta controls are easy to understand and use. Its feature-rich compact size saves you space and time setting up various modules or expensive effects hardware. The knob has 2 positions, applying different effect scenes depending on its position.

Included Effects scenes are:

SPACE
Two kind of Reverbs:

• Classic long tail reverb with tone and filter control.
• Experimental reverb from shimmery to deep/black-hole textures.

RISER
Two kind of Risers:

• High Pass filter with reverb and noise build up.
• High Pass filter with reverb and Shepard Tone style build up.

FILTER

• DJ style Filter with resonance control.

LOOP

• Looper and Reverse Looper / beat-repeat. Synced to tempo.

DELAY

• Clocked Delay with reverb wash and HP/LP Filter.

GATER
Two effects in one knob including:

• Gater with division control and built-in High Pass filter.
• Snare roll build up with reverb and built-in High Pass filter.

Specifications

• Width: 6hp
• Depth: 22mm
• Power: +12V 110mA / -12V 20mA

Manufacturer product page here.

The post Oxi Instruments Meta Eurorack Stereo Multi FX Module appeared first on Elevator Sound.