Modulation Archives - Elevator Sound https://www.elevatorsound.com/product-category/modular/modular-effects/modular-effects-modulation/ Eurorack Modular, Synthesizer & Electronic Music Hardware Store Fri, 29 Nov 2024 16:10:00 +0000 en-GB hourly 1 https://wordpress.org/?v=6.7.1 333 Modules Dual PT Double Delay, Glitch and Trash Eurorack Module https://www.elevatorsound.com/product/333-modules-dual-pt-double-delay-glitch-and-trash-eurorack-module/ Thu, 07 Mar 2024 13:21:00 +0000 https://www.elevatorsound.com/?post_type=product&p=88682 PT Double module with a wide variety of modulation effects (Reverb Delay, Echo, etc…) and experimental character based on two PT2399 chips mounted in series, with its characteristic sound and with 4 different feedback points (2 pre FX and 2 post FX) and two voltage-controlled delay times. A specialist in destroying signals and taking them to noisy terrain, thanks to its four feedback points it is capable of generating autonomous drone-distortion audio signals. Specs Width: 8 HP Power: 124 mA +12V 26 mA -12V 0 mA 5V Manufacturer Product Page HERE

The post 333 Modules Dual PT Double Delay, Glitch and Trash Eurorack Module appeared first on Elevator Sound.

]]> PT Double module with a wide variety of modulation effects (Reverb Delay, Echo, etc…) and experimental character based on two PT2399 chips mounted in series, with its characteristic sound and with 4 different feedback points (2 pre FX and 2 post FX) and two voltage-controlled delay times. A specialist in destroying signals and taking them to noisy terrain, thanks to its four feedback points it is capable of generating autonomous drone-distortion audio signals.

Specs
Width: 8 HP
Power: 124 mA +12V
26 mA -12V
0 mA 5V

Manufacturer Product Page HERE

The post 333 Modules Dual PT Double Delay, Glitch and Trash Eurorack Module appeared first on Elevator Sound.

]]> Instruo Dapf Eurorack Dual All Pass Filter Module https://www.elevatorsound.com/product/instruo-dapf-eurorack-dual-all-pass-filter-module/ Tue, 20 Feb 2024 14:00:59 +0000 https://www.elevatorsound.com/?post_type=product&p=88044 Introducing dåpf, the first dedicated effects processor in the Instruo product line. The Instruo dåpf is a set of two analogue all-pass filters. You might be asking yourself, “What is the point of a filter that passes everything?” All-pass filters don’t actually attenuate frequency amplitudes directly, but rather alter the phase relationship of frequencies across the spectrum. All-pass filter stages appear in the vast majority of voltage-controlled filter topologies as well as serving as a core building block within DSP. The normalled I/O of dåpf allows for cascaded or independent use of the two all-pass filter circuits, offering everything from classic phase-shifting to psychoacoustic stereo enhancement and synthetic Doppler effect. Features Two parallel all-pass filters Independent attenuverters for voltage control 1-Pole/2-Pole configuration for left channel Cascaded normalisation Global 1 volt per octave tracking Specifications Width: 4hp Depth: 30mm Power: +12v 60mA / -12v 60mA Manufacturer product page here. Product manual here.

The post Instruo Dapf Eurorack Dual All Pass Filter Module appeared first on Elevator Sound.

]]> Introducing dåpf, the first dedicated effects processor in the Instruo product line. The Instruo dåpf is a set of two analogue all-pass filters.

You might be asking yourself, “What is the point of a filter that passes everything?” All-pass filters don’t actually attenuate frequency amplitudes directly, but rather alter the phase relationship of frequencies across the spectrum. All-pass filter stages appear in the vast majority of voltage-controlled filter topologies as well as serving as a core building block within DSP.

The normalled I/O of dåpf allows for cascaded or independent use of the two all-pass filter circuits, offering everything from classic phase-shifting to psychoacoustic stereo enhancement and synthetic Doppler effect.

Features

  • Two parallel all-pass filters
  • Independent attenuverters for voltage control
  • 1-Pole/2-Pole configuration for left channel
  • Cascaded normalisation
  • Global 1 volt per octave tracking

Specifications

  • Width: 4hp
  • Depth: 30mm
  • Power: +12v 60mA / -12v 60mA

Manufacturer product page here.
Product manual here.

The post Instruo Dapf Eurorack Dual All Pass Filter Module appeared first on Elevator Sound.

]]> Happy Nerding FX Aid 1U Eurorack Multi FX Module (Black) https://www.elevatorsound.com/product/happy-nerding-fx-aid-1u-eurorack-multi-fx-module-black/ Sat, 02 Dec 2023 15:59:55 +0000 https://www.elevatorsound.com/?post_type=product&p=86176 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets – stores selected program and all three controls. Spin FV-1 based. Intellijel format 1U. The last used effect, assigns and presets are always remembered. 32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order. Reflashing procedure is quite easy: playing 40 sec long “wav” file of line level amplitude to CV input. Reflashing mode: hold both buttons for 10 sec. By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 2000 Hz or brought up to 48 kHz. Specifications Width: 24hp Depth: 40mm Power: +80mA, -30mA Manufacturer product page here. Product manual here.

The post Happy Nerding FX Aid 1U Eurorack Multi FX Module (Black) appeared first on Elevator Sound.

]]> 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets – stores selected program and all three controls. Spin FV-1 based. Intellijel format 1U.

The last used effect, assigns and presets are always remembered. 32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order. Reflashing procedure is quite easy: playing 40 sec long “wav” file of line level amplitude to CV input. Reflashing mode: hold both buttons for 10 sec. By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 2000 Hz or brought up to 48 kHz.

Specifications
Width: 24hp
Depth: 40mm
Power: +80mA, -30mA
Manufacturer product page here.
Product manual here.

The post Happy Nerding FX Aid 1U Eurorack Multi FX Module (Black) appeared first on Elevator Sound.

]]> Happy Nerding FX Aid 1U Eurorack Multi FX Module (Silver) https://www.elevatorsound.com/product/happy-nerding-fx-aid-1u-eurorack-multi-fx-module-silver/ Sat, 02 Dec 2023 15:54:28 +0000 https://www.elevatorsound.com/?post_type=product&p=86169 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets – stores selected program and all three controls. Spin FV-1 based. Intellijel format 1U. The last used effect, assigns and presets are always remembered. 32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order. Reflashing procedure is quite easy: playing 40 sec long “wav” file of line level amplitude to CV input. Reflashing mode: hold both buttons for 10 sec. By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 2000 Hz or brought up to 48 kHz. Specifications Width: 24hp Depth: 40mm Power: +80mA, -30mA Manufacturer product page here. Product manual here.

The post Happy Nerding FX Aid 1U Eurorack Multi FX Module (Silver) appeared first on Elevator Sound.

]]> 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets – stores selected program and all three controls. Spin FV-1 based. Intellijel format 1U.

The last used effect, assigns and presets are always remembered. 32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order. Reflashing procedure is quite easy: playing 40 sec long “wav” file of line level amplitude to CV input. Reflashing mode: hold both buttons for 10 sec. By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 2000 Hz or brought up to 48 kHz.

Specifications
Width: 24hp
Depth: 40mm
Power: +80mA, -30mA
Manufacturer product page here.
Product manual here.

The post Happy Nerding FX Aid 1U Eurorack Multi FX Module (Silver) appeared first on Elevator Sound.

]]> Befaco FX Boy Eurorack Multi-FX Module https://www.elevatorsound.com/product/befaco-fx-boy-eurorack-multi-fx-module/ Wed, 18 Oct 2023 11:00:10 +0000 https://www.elevatorsound.com/?post_type=product&p=83862 FxBoy is a multi-FX module designed in collaboration with several talented manufacturers. This is an effect unit with CV control over the parameters and Dry/wet control, with a Built-in CV controllable four bands EQ. The FX-Boy ships with the ‘Founders Cartridge Park’ with 7 custom effects designed by various synth companies. Each effect is physically hosted in a hot-swappable game cart and designed by a different manufacturer: Touell Skouarn with Skuara a harsh fuzz with overdrive, Instruo with micro Phaser, a two-flavoured Phaser, Feedback modules with a vintage Flanger, XOR with FX-Girl, a digital double effect module: Delay + Granularizer, Making sound machines with an analog Wave folder, Tesseract with a bit crusher and Befaco Trash distortion! Features CV control over all parameters and Dry/wet CV controllable four-band EQ, routable post or pre-effect. Selector for two different flavours of each cart. Open specifications to design your own carts Hot swap for all carts. (A tiny pop can occur depending on the cartridge design) Specifications Width: 12hp Depth: 35mm Power: +125mA, -100mA Manufacturer product page here. Product manual here.

The post Befaco FX Boy Eurorack Multi-FX Module appeared first on Elevator Sound.

]]> FxBoy is a multi-FX module designed in collaboration with several talented manufacturers. This is an effect unit with CV control over the parameters and Dry/wet control, with a Built-in CV controllable four bands EQ. The FX-Boy ships with the ‘Founders Cartridge Park’ with 7 custom effects designed by various synth companies.

Each effect is physically hosted in a hot-swappable game cart and designed by a different manufacturer: Touell Skouarn with Skuara a harsh fuzz with overdrive, Instruo with micro Phaser, a two-flavoured Phaser, Feedback modules with a vintage Flanger, XOR with FX-Girl, a digital double effect module: Delay + Granularizer, Making sound machines with an analog Wave folder, Tesseract with a bit crusher and Befaco Trash distortion!

Features

  • CV control over all parameters and Dry/wet
  • CV controllable four-band EQ, routable post or pre-effect.
  • Selector for two different flavours of each cart.
  • Open specifications to design your own carts
  • Hot swap for all carts. (A tiny pop can occur depending on the cartridge design)

Specifications
Width: 12hp
Depth: 35mm
Power: +125mA, -100mA

Manufacturer product page here.
Product manual here.

The post Befaco FX Boy Eurorack Multi-FX Module appeared first on Elevator Sound.

]]> SoundForce Chorus 6 Eurorack Analog BBD Chorus Module (Black) https://www.elevatorsound.com/product/soundforce-chorus-6-eurorack-analog-bbd-module-black/ Tue, 26 Sep 2023 16:30:09 +0000 https://www.elevatorsound.com/?post_type=product&p=83475 The SoundForce Chorus 6 is 16HP Juno style BDD chorus with plenty of CV inputs. It is using the Xvive MN3009 and the same audio path as the original circuit. It can do the classic Juno I, II and I+II modes. I+II modes are available from both the Juno 6 and Juno 60, each in mono (as the original) or stereo, giving you 4 I+II options. But the manual and external modes can take the module away from sweet and pretty sound territories right into weird and noisy soundscapes. The SoundForce Chorus 6 has 4 main modes: I, II, I+II, MAN for manual and EXT for external. I and II are the classic Juno modes available in the Juno 6/60/106. The Chorus 6 can be used with either mono or stereo input signals. When the right channel is unconnected, the left channel is sent to the right jack so it can be used with mono signals. When using both inputs, each input signal is going through its own BBD delay line. Specifications Width: 16hp Depth: 38mm Power: +76mA, -35mA Manufacturer product page here.

The post SoundForce Chorus 6 Eurorack Analog BBD Chorus Module (Black) appeared first on Elevator Sound.

]]> The SoundForce Chorus 6 is 16HP Juno style BDD chorus with plenty of CV inputs. It is using the Xvive MN3009 and the same audio path as the original circuit. It can do the classic Juno I, II and I+II modes. I+II modes are available from both the Juno 6 and Juno 60, each in mono (as the original) or stereo, giving you 4 I+II options. But the manual and external modes can take the module away from sweet and pretty sound territories right into weird and noisy soundscapes.

The SoundForce Chorus 6 has 4 main modes: I, II, I+II, MAN for manual and EXT for external. I and II are the classic Juno modes available in the Juno 6/60/106. The Chorus 6 can be used with either mono or stereo input signals. When the right channel is unconnected, the left channel is sent to the right jack so it can be used with mono signals. When using both inputs, each input signal is going through its own BBD delay line.

Specifications
Width: 16hp
Depth: 38mm
Power: +76mA, -35mA

Manufacturer product page here.

The post SoundForce Chorus 6 Eurorack Analog BBD Chorus Module (Black) appeared first on Elevator Sound.

]]> NANO Modules ARC Eurorack Analog Dual Function Generator Module [B-Stock] https://www.elevatorsound.com/product/nano-modules-arc-eurorack-analog-dual-function-generator-module-b-stock/ Mon, 11 Nov 2024 17:11:14 +0000 https://www.elevatorsound.com/?post_type=product&p=94804 *customer returned after initial use as not quite right for them. Item is in as new condition and comes with the original box, cable and a full warranty* The ultimate modulation master. ARC is an analog Dual Function Generator featuring 2 channels with enhanced functionalities. Features Versatile Operation. Each channel can function as an Envelope generator (AD/ADSR), an Audio & Low-frequency oscillator (VCO/LFO), a Slew limiter, and a Waveform Modulator (VCA/Polarizer), with dedicated trigger and signal inputs. Adjustable Parameters. Users can fine-tune Rise and Fall times, adjust Shapes between linear, logarithmic, or exponential (independently for rise and fall), and use an Attenuverter (VCA/Polarizer) for the generated function. Additionally, it includes a Sustain mode and an Offset adjust. Additional Features. The module includes a Comparator, a Logic section, and CV control for everything, providing further versatility. Specifications Width: 24hp Depth: 40mm Power: +12V 150mA / -12V 130mA Manufacturer product page here. Product manual here.

The post NANO Modules ARC Eurorack Analog Dual Function Generator Module [B-Stock] appeared first on Elevator Sound.

]]> *customer returned after initial use as not quite right for them. Item is in as new condition and comes with the original box, cable and a full warranty*

The ultimate modulation master.
ARC is an analog Dual Function Generator featuring 2 channels with enhanced functionalities.

Features

  • Versatile Operation. Each channel can function as an Envelope generator (AD/ADSR), an Audio & Low-frequency oscillator (VCO/LFO), a Slew limiter, and a Waveform Modulator (VCA/Polarizer), with dedicated trigger and signal inputs.
  • Adjustable Parameters. Users can fine-tune Rise and Fall times, adjust Shapes between linear, logarithmic, or exponential (independently for rise and fall), and use an Attenuverter (VCA/Polarizer) for the generated function. Additionally, it includes a Sustain mode and an Offset adjust.
  • Additional Features. The module includes a Comparator, a Logic section, and CV control for everything, providing further versatility.

Specifications

  • Width: 24hp
  • Depth: 40mm
  • Power: +12V 150mA / -12V 130mA

Manufacturer product page here.
Product manual here.

The post NANO Modules ARC Eurorack Analog Dual Function Generator Module [B-Stock] appeared first on Elevator Sound.

]]> NANO Modules ARC Eurorack Analog Dual Function Generator Module https://www.elevatorsound.com/product/nano-modules-arc-eurorack-analog-dual-function-generator-module/ Thu, 03 Oct 2024 11:00:18 +0000 https://www.elevatorsound.com/?post_type=product&p=92663 The ultimate modulation master. ARC is an analog Dual Function Generator featuring 2 channels with enhanced functionalities. Features Versatile Operation. Each channel can function as an Envelope generator (AD/ADSR), an Audio & Low-frequency oscillator (VCO/LFO), a Slew limiter, and a Waveform Modulator (VCA/Polarizer), with dedicated trigger and signal inputs. Adjustable Parameters. Users can fine-tune Rise and Fall times, adjust Shapes between linear, logarithmic, or exponential (independently for rise and fall), and use an Attenuverter (VCA/Polarizer) for the generated function. Additionally, it includes a Sustain mode and an Offset adjust. Additional Features. The module includes a Comparator, a Logic section, and CV control for everything, providing further versatility. Specifications Width: 24hp Depth: 40mm Power: +12V 150mA / -12V 130mA Manufacturer product page here. Product manual here.

The post NANO Modules ARC Eurorack Analog Dual Function Generator Module appeared first on Elevator Sound.

]]> The ultimate modulation master.
ARC is an analog Dual Function Generator featuring 2 channels with enhanced functionalities.

Features

  • Versatile Operation. Each channel can function as an Envelope generator (AD/ADSR), an Audio & Low-frequency oscillator (VCO/LFO), a Slew limiter, and a Waveform Modulator (VCA/Polarizer), with dedicated trigger and signal inputs.
  • Adjustable Parameters. Users can fine-tune Rise and Fall times, adjust Shapes between linear, logarithmic, or exponential (independently for rise and fall), and use an Attenuverter (VCA/Polarizer) for the generated function. Additionally, it includes a Sustain mode and an Offset adjust.
  • Additional Features. The module includes a Comparator, a Logic section, and CV control for everything, providing further versatility.

Specifications

  • Width: 24hp
  • Depth: 40mm
  • Power: +12V 150mA / -12V 130mA

Manufacturer product page here.
Product manual here.

The post NANO Modules ARC Eurorack Analog Dual Function Generator Module appeared first on Elevator Sound.

]]> Doepfer A-137-2 Eurorack Wave Multiplier Module https://www.elevatorsound.com/product/doepfer-a-137-2-eurorack-wave-multiplier-module/ Tue, 15 Aug 2023 12:55:22 +0000 https://www.elevatorsound.com/?post_type=product&p=81992 Module A-137-2 is another version of a wave multiplier. In contrast to the A-137-1 Wavemultiplier I the A-137-2 generates four phase-shifted copies of a VCO signal applied to the audio input. The four shifted signals are added to the original signal to obtain a fat sound similar to five independent VCOs. The phase shifting is made by a simple circuit that works only for sloped signals like sawtooth, triangle or sine, but not for rectangles or pulses. The module has available four manual shift controls and four control voltage inputs with attenuators for the four internal shifting circuits. Typical sources for these inputs are LFOs, VCLFOs, random voltages, envelope generators, sequencers or other control voltage sources. Internally eight single outputs are available at single pins: the four shifted signals and in addition four rectangle outputs. A corresponding breakout module with eight sockets is in the planning stage and will be released provided that there are sufficient inquiries. The original signal and the four shifted signals are equipped with internal jumpers. If external toggle switches are used instead of the jumpers each of the 5 signals can be turned on/off individually. Specifications Width: 14hp Depth: 50mm Power: +30A / -20mA Manufacturer […]

The post Doepfer A-137-2 Eurorack Wave Multiplier Module appeared first on Elevator Sound.

]]> Module A-137-2 is another version of a wave multiplier. In contrast to the A-137-1 Wavemultiplier I the A-137-2 generates four phase-shifted copies of a VCO signal applied to the audio input. The four shifted signals are added to the original signal to obtain a fat sound similar to five independent VCOs. The phase shifting is made by a simple circuit that works only for sloped signals like sawtooth, triangle or sine, but not for rectangles or pulses.

The module has available four manual shift controls and four control voltage inputs with attenuators for the four internal shifting circuits. Typical sources for these inputs are LFOs, VCLFOs, random voltages, envelope generators, sequencers or other control voltage sources. Internally eight single outputs are available at single pins: the four shifted signals and in addition four rectangle outputs. A corresponding breakout module with eight sockets is in the planning stage and will be released provided that there are sufficient inquiries. The original signal and the four shifted signals are equipped with internal jumpers. If external toggle switches are used instead of the jumpers each of the 5 signals can be turned on/off individually.

Specifications

  • Width: 14hp
  • Depth: 50mm
  • Power: +30A / -20mA

Manufacturer product page here.

The post Doepfer A-137-2 Eurorack Wave Multiplier Module appeared first on Elevator Sound.

]]> Doepfer A-137-1 Eurorack Wave Multiplier Module https://www.elevatorsound.com/product/doepfer-a-137-1-eurorack-wave-multiplier-module/ Tue, 15 Aug 2023 12:39:34 +0000 https://www.elevatorsound.com/?post_type=product&p=81990 A-137 is a voltage controlled wave multiplier. The basic idea of ??a wave multiplier is to multiply the waveform of an incoming signal (eg triangle/saw/sine from a VCO) within one period of the waveform. This leads to additional harmonics of the incoming signal. The period and consequently the pitch of the signals remains unchanged. The A-137 works as a kind of ” inverse low pass filter “, ie it adds a lot of harmonics to a signal that contains none or only a few harmonics (eg sine or triangle waveform). In contrast to that a low pass filter removes harmonics from a signal that contains a lot of harmonics (eg saw or rectangle waveform). Consequently the best results are obtained in combination with input signals poor in harmonics (eg sine or triangle). The A-137 can be used with signals rich in harmonics too (eg saw) but the effect is not as remarkable as for triangle or sine waves. For rectangle signals none or only little effects are obtained. The A-137 is a very sophisticated wave multiplier that offers much more features, more controls and more waveform manipulations than other wave multipliers available so far. In addition all parameters are both […]

The post Doepfer A-137-1 Eurorack Wave Multiplier Module appeared first on Elevator Sound.

]]> A-137 is a voltage controlled wave multiplier. The basic idea of ??a wave multiplier is to multiply the waveform of an incoming signal (eg triangle/saw/sine from a VCO) within one period of the waveform. This leads to additional harmonics of the incoming signal. The period and consequently the pitch of the signals remains unchanged. The A-137 works as a kind of ” inverse low pass filter “, ie it adds a lot of harmonics to a signal that contains none or only a few harmonics (eg sine or triangle waveform). In contrast to that a low pass filter removes harmonics from a signal that contains a lot of harmonics (eg saw or rectangle waveform). Consequently the best results are obtained in combination with input signals poor in harmonics (eg sine or triangle). The A-137 can be used with signals rich in harmonics too (eg saw) but the effect is not as remarkable as for triangle or sine waves. For rectangle signals none or only little effects are obtained.

The A-137 is a very sophisticated wave multiplier that offers much more features, more controls and more waveform manipulations than other wave multipliers available so far. In addition all parameters are both manually adjusted and controlled by external voltages.

Specifications

  • Width: 14hp
  • Depth: 65mm
  • Power: +40mA / -20mA

Manufacturer product page here.

The post Doepfer A-137-1 Eurorack Wave Multiplier Module appeared first on Elevator Sound.

]]>