Reverb Archives - Elevator Sound https://www.elevatorsound.com/product-category/modular/modular-effects/modular-effects-reverb/ Eurorack Modular, Synthesizer & Electronic Music Hardware Store Thu, 05 Dec 2024 15:28:57 +0000 en-GB hourly 1 https://wordpress.org/?v=6.7.1 Knobula Echo Cinematic Eurorack Stereo FX Module https://www.elevatorsound.com/product/knobula-echo-cinematic-eurorack-stereo-fx-module/ Fri, 31 May 2024 14:27:24 +0000 https://www.elevatorsound.com/?post_type=product&p=90883 Echo Cinematic is a practical stereo effects device inspired by the dub music culture that emerged from Jamaica and landed in London during the early 1980s. Analog tape delays were routinely patched into the mixing desk through a channel strip, to be Eq’d and fed back to themselves via the FX send bus. The engineer could manipulate the Eq and FX send controls to create a constantly evolving rhythmic texture, a feedback loop teetering on the edge of self-oscillation. Echo Cinematic does away with the need for a sophisticated mixing desk and expands on this principle with a versatile resonant filter and five independent sources of automation built into the module; two LFOs for both Eq and delay modulation, a 30 second knob recorder capable of simultaneously controlling every knob on the front panel, and two external CV inputs, instantly assignable to any control as you insert a patch cable. The EQ section features three filter types: a high/low-pass filter, a peak/notch filter, and a classic comb filter. Each of these can be patched into either the feedback loop (Dub Mode), the delay output, or the entire signal path, including the dry signal. The delay section offers up to two […]

The post Knobula Echo Cinematic Eurorack Stereo FX Module appeared first on Elevator Sound.

]]> Echo Cinematic is a practical stereo effects device inspired by the dub music culture that emerged from Jamaica and landed in London during the early 1980s. Analog tape delays were routinely patched into the mixing desk through a channel strip, to be Eq’d and fed back to themselves via the FX send bus. The engineer could manipulate the Eq and FX send controls to create a constantly evolving rhythmic texture, a feedback loop teetering on the edge of self-oscillation. Echo Cinematic does away with the need for a sophisticated mixing desk and expands on this principle with a versatile resonant filter and five independent sources of automation built into the module; two LFOs for both Eq and delay modulation, a 30 second knob recorder capable of simultaneously controlling every knob on the front panel, and two external CV inputs, instantly assignable to any control as you insert a patch cable.

The EQ section features three filter types: a high/low-pass filter, a peak/notch filter, and a classic comb filter. Each of these can be patched into either the feedback loop (Dub Mode), the delay output, or the entire signal path, including the dry signal. The delay section offers up to two seconds of delay with a tap delay facility that also applies grid snapping, allowing your delay settings to be constantly locked to your beat or to a clock signal. Reverb duties are taken care of by our lush 24-bit stereo reverb, as featured on our other cinematic modules.

Specifications

  • Width: 12hp
  • Depth: 35mm
  • Power: +12v 90mA / -12v 5mA

Manufacturer product page here.
Product manual here.

The post Knobula Echo Cinematic Eurorack Stereo FX Module appeared first on Elevator Sound.

]]> Oxi Instruments Meta Eurorack Stereo Multi FX Module https://www.elevatorsound.com/product/oxi-instruments-meta-eurorack-stereo-multi-fx-module/ Tue, 30 Jul 2024 17:37:14 +0000 https://www.elevatorsound.com/?post_type=product&p=92394 Compact stereo performance insert effect module with 6 FX-scenes. Meta is the all-in-one solution for creating smooth transitions, exciting drops, and other creative live performance effects. Meta controls are easy to understand and use. Its feature-rich compact size saves you space and time setting up various modules or expensive effects hardware. The knob has 2 positions, applying different effect scenes depending on its position. Included Effects scenes are: SPACE Two kind of Reverbs: Classic long tail reverb with tone and filter control. Experimental reverb from shimmery to deep/black-hole textures. RISER Two kind of Risers: High Pass filter with reverb and noise build up. High Pass filter with reverb and Shepard Tone style build up. FILTER DJ style Filter with resonance control. LOOP Looper and Reverse Looper / beat-repeat. Synced to tempo. DELAY Clocked Delay with reverb wash and HP/LP Filter. GATER Two effects in one knob including: Gater with division control and built-in High Pass filter. Snare roll build up with reverb and built-in High Pass filter. Specifications Width: 6hp Depth: 22mm Power: +12V 110mA / -12V 20mA Manufacturer product page here.

The post Oxi Instruments Meta Eurorack Stereo Multi FX Module appeared first on Elevator Sound.

]]> Compact stereo performance insert effect module with 6 FX-scenes.

Meta is the all-in-one solution for creating smooth transitions, exciting drops, and other creative live performance effects. Meta controls are easy to understand and use. Its feature-rich compact size saves you space and time setting up various modules or expensive effects hardware. The knob has 2 positions, applying different effect scenes depending on its position.

Included Effects scenes are:

SPACE
Two kind of Reverbs:

  • Classic long tail reverb with tone and filter control.
  • Experimental reverb from shimmery to deep/black-hole textures.

RISER
Two kind of Risers:

  • High Pass filter with reverb and noise build up.
  • High Pass filter with reverb and Shepard Tone style build up.

FILTER

  • DJ style Filter with resonance control.

LOOP

  • Looper and Reverse Looper / beat-repeat. Synced to tempo.

DELAY

  • Clocked Delay with reverb wash and HP/LP Filter.

GATER
Two effects in one knob including:

  • Gater with division control and built-in High Pass filter.
  • Snare roll build up with reverb and built-in High Pass filter.

Specifications

  • Width: 6hp
  • Depth: 22mm
  • Power: +12V 110mA / -12V 20mA

Manufacturer product page here.

The post Oxi Instruments Meta Eurorack Stereo Multi FX Module appeared first on Elevator Sound.

]]> Bubblesound Springverb Eurorack Reverb Module with Tank https://www.elevatorsound.com/product/bubblesound-springverb-eurorack-reverb-module-with-tank/ Sat, 17 Feb 2024 12:33:18 +0000 https://www.elevatorsound.com/?post_type=product&p=88155 The SpringVerb is a classic analog Spring Reverb Driver with a few extras. The input signal goes into a state variable filter that is capable of self-oscillation. Then the filtered signal goes to the reverb driver, into the tank and back to a Voltage Controlled Crossfader for a CV-able Wet/Dry. The switch under the filter select switch determins what goes into the “Dry” side of the Crossfader. It can either be pre or post filter. There is a Voltage Controlled Feedback section as well as CV for the Cutoff Frequency and the Resonance of the filter section. The Feedback does exactly what it says, it feeds the Post Tank signal back into the input section. It can go from very subtile to guitar and amp style feedback. The Filter is very similiar to the SeM20, so the Resonance is agressive. The input can be overdriven a little, depending on what the input is. Unlike the SeM20 it doesn’t really clip, but just like the SeM20 when the input is low and the Resonace is high most of what comes out is Sine waves. Outputs: Filtered, Reverb Only and Mix Tank: The SpringVerb comes with a medium size 3 spring tank […]

The post Bubblesound Springverb Eurorack Reverb Module with Tank appeared first on Elevator Sound.

]]> The SpringVerb is a classic analog Spring Reverb Driver with a few extras.

The input signal goes into a state variable filter that is capable of self-oscillation. Then the filtered signal goes to the reverb driver, into the tank and back to a Voltage Controlled Crossfader for a CV-able Wet/Dry. The switch under the filter select switch determins what goes into the “Dry” side of the Crossfader. It can either be pre or post filter.

There is a Voltage Controlled Feedback section as well as CV for the Cutoff Frequency and the Resonance of the filter section.

The Feedback does exactly what it says, it feeds the Post Tank signal back into the input section. It can go from very subtile to guitar and amp style feedback.

The Filter is very similiar to the SeM20, so the Resonance is agressive. The input can be overdriven a little, depending on what the input is. Unlike the SeM20 it doesn’t really clip, but just like the SeM20 when the input is low and the Resonace is high most of what comes out is Sine waves.

Outputs: Filtered, Reverb Only and Mix

Tank: The SpringVerb comes with a medium size 3 spring tank and is compatible with many others.

Specifications
Width: 10hp
Depth: 45mm
Power: +43mA, -30mA
Manufacturer product page here.

The post Bubblesound Springverb Eurorack Reverb Module with Tank appeared first on Elevator Sound.

]]> Happy Nerding FX Aid 1U Eurorack Multi FX Module (Black) https://www.elevatorsound.com/product/happy-nerding-fx-aid-1u-eurorack-multi-fx-module-black/ Sat, 02 Dec 2023 15:59:55 +0000 https://www.elevatorsound.com/?post_type=product&p=86176 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets – stores selected program and all three controls. Spin FV-1 based. Intellijel format 1U. The last used effect, assigns and presets are always remembered. 32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order. Reflashing procedure is quite easy: playing 40 sec long “wav” file of line level amplitude to CV input. Reflashing mode: hold both buttons for 10 sec. By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 2000 Hz or brought up to 48 kHz. Specifications Width: 24hp Depth: 40mm Power: +80mA, -30mA Manufacturer product page here. Product manual here.

The post Happy Nerding FX Aid 1U Eurorack Multi FX Module (Black) appeared first on Elevator Sound.

]]> 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets – stores selected program and all three controls. Spin FV-1 based. Intellijel format 1U.

The last used effect, assigns and presets are always remembered. 32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order. Reflashing procedure is quite easy: playing 40 sec long “wav” file of line level amplitude to CV input. Reflashing mode: hold both buttons for 10 sec. By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 2000 Hz or brought up to 48 kHz.

Specifications
Width: 24hp
Depth: 40mm
Power: +80mA, -30mA
Manufacturer product page here.
Product manual here.

The post Happy Nerding FX Aid 1U Eurorack Multi FX Module (Black) appeared first on Elevator Sound.

]]> Happy Nerding FX Aid 1U Eurorack Multi FX Module (Silver) https://www.elevatorsound.com/product/happy-nerding-fx-aid-1u-eurorack-multi-fx-module-silver/ Sat, 02 Dec 2023 15:54:28 +0000 https://www.elevatorsound.com/?post_type=product&p=86169 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets – stores selected program and all three controls. Spin FV-1 based. Intellijel format 1U. The last used effect, assigns and presets are always remembered. 32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order. Reflashing procedure is quite easy: playing 40 sec long “wav” file of line level amplitude to CV input. Reflashing mode: hold both buttons for 10 sec. By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 2000 Hz or brought up to 48 kHz. Specifications Width: 24hp Depth: 40mm Power: +80mA, -30mA Manufacturer product page here. Product manual here.

The post Happy Nerding FX Aid 1U Eurorack Multi FX Module (Silver) appeared first on Elevator Sound.

]]> 32 unique audio effects arranged in 4 banks of 8 effects. Three effect controls plus analog Dry/Wet control with dedicated CV input. High quality stereo signal pass. Assignable CV input to effect controls or to Sample Rate reducer (changes internal clock). Four user storable presets – stores selected program and all three controls. Spin FV-1 based. Intellijel format 1U.

The last used effect, assigns and presets are always remembered. 32 effects are simultaneously available, but FX AID can be reflashed with other effects in any order. Reflashing procedure is quite easy: playing 40 sec long “wav” file of line level amplitude to CV input. Reflashing mode: hold both buttons for 10 sec. By default it runs on 32.77 kHz and, if sample rate reduction assign is used, this sample rate can be decreased down to 2000 Hz or brought up to 48 kHz.

Specifications
Width: 24hp
Depth: 40mm
Power: +80mA, -30mA
Manufacturer product page here.
Product manual here.

The post Happy Nerding FX Aid 1U Eurorack Multi FX Module (Silver) appeared first on Elevator Sound.

]]> Lateral Sound Clive Eurorack Chaotic Delay/Reverb Module https://www.elevatorsound.com/product/lateral-sound-clive-eurorack-chaotic-delay-reverb-module/ Sat, 11 Nov 2023 17:01:18 +0000 https://www.elevatorsound.com/?post_type=product&p=85388 Meet Clive. He’s Alan’s modular sibling. He does echoes and repeats, sometimes unpredictably. Clive has 3 modes: Cloud (reverb) Echo (delay) Grains (granular delay) Clive can do a tremendous job of adding atmosphere and ambience to whatever you feed him but he’s at his most interesting when you start bringing in the onboard modulation. Clive’s modulation acts on the delay or reverb time. It’s a random stepped wave so he jumps from one setting to the next. This can be a bit of fidgeting about or more dramatic jumps – M-Depth controls how much modulation you get and M-Speed how fast. There’s also an onboard noise generator which can add texture/chaos/aggression depending on your approach. Clive wants your modulation signals too, in fact that’s where he tends to get really interesting. He’s happy to accomodate -5v to +5v CV to interfere with his Time, Modulation Level, Noise Level and Mix controls. Specifications Width: 10hp Depth: 38mm Power: +90mA, -9mA Manufacturer product page here.

The post Lateral Sound Clive Eurorack Chaotic Delay/Reverb Module appeared first on Elevator Sound.

]]> Meet Clive. He’s Alan’s modular sibling. He does echoes and repeats, sometimes unpredictably.

Clive has 3 modes:

  • Cloud (reverb)
  • Echo (delay)
  • Grains (granular delay)

Clive can do a tremendous job of adding atmosphere and ambience to whatever you feed him but he’s at his most interesting when you start bringing in the onboard modulation. Clive’s modulation acts on the delay or reverb time. It’s a random stepped wave so he jumps from one setting to the next. This can be a bit of fidgeting about or more dramatic jumps – M-Depth controls how much modulation you get and M-Speed how fast.

There’s also an onboard noise generator which can add texture/chaos/aggression depending on your approach.

Clive wants your modulation signals too, in fact that’s where he tends to get really interesting. He’s happy to accomodate -5v to +5v CV to interfere with his Time, Modulation Level, Noise Level and Mix controls.

Specifications
Width: 10hp
Depth: 38mm
Power: +90mA, -9mA
Manufacturer product page here.

The post Lateral Sound Clive Eurorack Chaotic Delay/Reverb Module appeared first on Elevator Sound.

]]> Erica Synths Black Stereo Reverb Eurorack Module https://www.elevatorsound.com/product/erica-synths-black-stereo-reverb-eurorack-module/ Mon, 09 Oct 2023 18:27:08 +0000 https://www.elevatorsound.com/?post_type=product&p=83950 The Erica Synths Black Reverb is a versatile hi-fi stereo FX module with lots of unique features based on our custom DSP engine. The reverb sources are selectable Tape, BBD and “dirty BBD” digital; emulations with three modes, each – Room, Hall and Cathedral. Delicate room size control, feedback, feedback tone and stereo spin controls allow for designing extremely delicate reverberation effects. CV control over various parameters and the ability to save up to 10 presets will make this module an integral part of any performance rack. The modules run on new Erica Synths DSP hardware and the effects are developed in collaboration with Dutch company 112.dB who make some of the most beautiful sounding effects. Erica Black Series include high-end, unique functionality and superior quality modules. Only the best, highest-quality components are used, all inputs and outputs are protected against undesired overvoltage. Erica Black Series consist of range of modules that are needed to put together entire synth. Features Reverb based on Tape, BBD and digital delay lines Three room sizes Manual and triggered FREEZE with 1V/oct tracking 10 preset patches CV control over size, feedback, tone, dry/wet mix and preset selection Adjustable stereo spin Specifications Width: 12hp Depth: […]

The post Erica Synths Black Stereo Reverb Eurorack Module appeared first on Elevator Sound.

]]> The Erica Synths Black Reverb is a versatile hi-fi stereo FX module with lots of unique features based on our custom DSP engine. The reverb sources are selectable Tape, BBD and “dirty BBD” digital; emulations with three modes, each – Room, Hall and Cathedral. Delicate room size control, feedback, feedback tone and stereo spin controls allow for designing extremely delicate reverberation effects. CV control over various parameters and the ability to save up to 10 presets will make this module an integral part of any performance rack.

The modules run on new Erica Synths DSP hardware and the effects are developed in collaboration with Dutch company 112.dB who make some of the most beautiful sounding effects.

Erica Black Series include high-end, unique functionality and superior quality modules. Only the best, highest-quality components are used, all inputs and outputs are protected against undesired overvoltage. Erica Black Series consist of range of modules that are needed to put together entire synth.

Features

  • Reverb based on Tape, BBD and digital delay lines
  • Three room sizes
  • Manual and triggered FREEZE with 1V/oct tracking
  • 10 preset patches
  • CV control over size, feedback, tone, dry/wet mix and preset selection
  • Adjustable stereo spin

Specifications

  • Width: 12hp
  • Depth: 35mm
  • Power: +120mA / -39mA

Manufacturer product page here.
Product manual here.

The post Erica Synths Black Stereo Reverb Eurorack Module appeared first on Elevator Sound.

]]> Befaco FX Boy Eurorack Multi-FX Module https://www.elevatorsound.com/product/befaco-fx-boy-eurorack-multi-fx-module/ Wed, 18 Oct 2023 11:00:10 +0000 https://www.elevatorsound.com/?post_type=product&p=83862 FxBoy is a multi-FX module designed in collaboration with several talented manufacturers. This is an effect unit with CV control over the parameters and Dry/wet control, with a Built-in CV controllable four bands EQ. The FX-Boy ships with the ‘Founders Cartridge Park’ with 7 custom effects designed by various synth companies. Each effect is physically hosted in a hot-swappable game cart and designed by a different manufacturer: Touell Skouarn with Skuara a harsh fuzz with overdrive, Instruo with micro Phaser, a two-flavoured Phaser, Feedback modules with a vintage Flanger, XOR with FX-Girl, a digital double effect module: Delay + Granularizer, Making sound machines with an analog Wave folder, Tesseract with a bit crusher and Befaco Trash distortion! Features CV control over all parameters and Dry/wet CV controllable four-band EQ, routable post or pre-effect. Selector for two different flavours of each cart. Open specifications to design your own carts Hot swap for all carts. (A tiny pop can occur depending on the cartridge design) Specifications Width: 12hp Depth: 35mm Power: +125mA, -100mA Manufacturer product page here. Product manual here.

The post Befaco FX Boy Eurorack Multi-FX Module appeared first on Elevator Sound.

]]> FxBoy is a multi-FX module designed in collaboration with several talented manufacturers. This is an effect unit with CV control over the parameters and Dry/wet control, with a Built-in CV controllable four bands EQ. The FX-Boy ships with the ‘Founders Cartridge Park’ with 7 custom effects designed by various synth companies.

Each effect is physically hosted in a hot-swappable game cart and designed by a different manufacturer: Touell Skouarn with Skuara a harsh fuzz with overdrive, Instruo with micro Phaser, a two-flavoured Phaser, Feedback modules with a vintage Flanger, XOR with FX-Girl, a digital double effect module: Delay + Granularizer, Making sound machines with an analog Wave folder, Tesseract with a bit crusher and Befaco Trash distortion!

Features

  • CV control over all parameters and Dry/wet
  • CV controllable four-band EQ, routable post or pre-effect.
  • Selector for two different flavours of each cart.
  • Open specifications to design your own carts
  • Hot swap for all carts. (A tiny pop can occur depending on the cartridge design)

Specifications
Width: 12hp
Depth: 35mm
Power: +125mA, -100mA

Manufacturer product page here.
Product manual here.

The post Befaco FX Boy Eurorack Multi-FX Module appeared first on Elevator Sound.

]]> Erica Synths Black Drum Stereo FX Eurorack Module https://www.elevatorsound.com/product/erica-synths-black-drum-stereo-fx-eurorack-module/ Thu, 01 Feb 2024 16:20:48 +0000 https://www.elevatorsound.com/?post_type=product&p=87758 The STEREO FX module brings hi-fi stereo effects into the Erica Synths Drum Series. Based on our new DSP engine, the module provides a wide range of custom delay and reverb effects. CV control over various parameters and the ability to save up to 10 presets will make this module an integral part of any performance rack. Features Hi-Fi stereo FX module 3 delay and 3 reverb effects Tap and clock synchronization of delay time Delay time divisions and multiplications in sync mode 10 preset patches CV control over delay time, feedback, and preset selection Specifications Width: 10hp Depth: 35mm Power: +123mA / -40mA Manufacturer product page here. Product manual here.

The post Erica Synths Black Drum Stereo FX Eurorack Module appeared first on Elevator Sound.

]]> The STEREO FX module brings hi-fi stereo effects into the Erica Synths Drum Series. Based on our new DSP engine, the module provides a wide range of custom delay and reverb effects. CV control over various parameters and the ability to save up to 10 presets will make this module an integral part of any performance rack.

Features

  • Hi-Fi stereo FX module
  • 3 delay and 3 reverb effects
  • Tap and clock synchronization of delay time
  • Delay time divisions and multiplications in sync mode
  • 10 preset patches
  • CV control over delay time, feedback, and preset selection

Specifications

  • Width: 10hp
  • Depth: 35mm
  • Power: +123mA / -40mA

Manufacturer product page here.
Product manual here.

The post Erica Synths Black Drum Stereo FX Eurorack Module appeared first on Elevator Sound.

]]> After Later Audio Typhoon Eurorack Granular Sampler Module (Mutable Instruments Clouds Clone) https://www.elevatorsound.com/product/after-later-audio-typhoon-eurorack-granular-sampler-module-mutable-instruments-clouds-clone-black/ Fri, 09 Jun 2023 18:35:56 +0000 https://www.elevatorsound.com/?post_type=product&p=79925 This is where Storm and Monsoon meet to create the latest improvements on the original Clouds design.  With Typhoon you get all of the features of Storm combined with sliders and layout of Monsoon in 16hp. Typhoon runs the SuperParasites firmware, so no more having to swap between Parasites and Kammerl firmware options.  Some of the notable features are: Dedicated blend controls for Feedback, Panning, Mix, and Reverb (similar to Monsoon) All eight modes from Parasites and Kammerl Stereo VCAs Input/output mutes Exponential and linear pitch controls Universal CV routing and random CV signals Usage tips: Press and hold time to swap between modes, then press the time to cycle through the options (* = lit LED) *OOO – Granular Clouds (Parasites) O*OO – Pitch Shift / Time Stretch (Parasites) OO*O – Looping Delay (Parasites) OOO* – Spectral Processor (Parasites) O*** – Oliverb (Parasites) *O** – Resonator (Parasites) **O* – Beat Repeat (Kammerl) ***O – Spectral Clouds (Kammerl) Use the buttons next to the VU meters to mute either the input or output. Aux CV input is routed to all CV inputs. Helpful links The original manual gives a great intro to the basics The Microcell manual has a good overview of the additional controls (it […]

The post After Later Audio Typhoon Eurorack Granular Sampler Module (Mutable Instruments Clouds Clone) appeared first on Elevator Sound.

]]> This is where Storm and Monsoon meet to create the latest improvements on the original Clouds design.  With Typhoon you get all of the features of Storm combined with sliders and layout of Monsoon in 16hp. Typhoon runs the SuperParasites firmware, so no more having to swap between Parasites and Kammerl firmware options.  Some of the notable features are:

  • Dedicated blend controls for Feedback, Panning, Mix, and Reverb (similar to Monsoon)
  • All eight modes from Parasites and Kammerl
  • Stereo VCAs
  • Input/output mutes
  • Exponential and linear pitch controls
  • Universal CV routing and random CV signals

Usage tips:
Press and hold time to swap between modes, then press the time to cycle through the options (* = lit LED)

  • *OOO – Granular Clouds (Parasites)
  • O*OO – Pitch Shift / Time Stretch (Parasites)
  • OO*O – Looping Delay (Parasites)
  • OOO* – Spectral Processor (Parasites)
  • O*** – Oliverb (Parasites)
  • *O** – Resonator (Parasites)
  • **O* – Beat Repeat (Kammerl)
  • ***O – Spectral Clouds (Kammerl)

Use the buttons next to the VU meters to mute either the input or output.
Aux CV input is routed to all CV inputs.

Helpful links

  1. The original manual gives a great intro to the basics
  2. The Microcell manual has a good overview of the additional controls (it uses the same firmware)

Open Source Hardware
Original Clouds:

Typhoon:

Specifications

  • Width: 16hp
  • Depth: 25mm
  • Power: +160mA / -35mA

Manufacturer product page here.
Product manual here.

The post After Later Audio Typhoon Eurorack Granular Sampler Module (Mutable Instruments Clouds Clone) appeared first on Elevator Sound.

]]>