Narrow shape of SeventyPWR allows to mount it between two bus boards. A Doubled output terminal connects wires separately to two (or four) bus boards. This minimalize wire length and impedance of power network. SeventyPWR works perfectly with our Filtered bus boards and also with all standard bus boards form other producers. Special feature of SeventyPWR is possibility to adjust of output voltage in safe range. Output voltages +12V and -12V are factory adjusted with accuracy of 0,1% or better. Adjusting feature can compensate voltage drop on wires under load. This feature allows setting very accurate voltage directly on the modules power inputs.

As is our practice SeventyPWR comes with overvoltage, over temperature, over current, short current, over load and input reverse polarity protection. There are two stages of input filters which decrease noise from power brick and electrical grid

Comes with Meanwell PSU and 2 x Konstant Lab Filtered Bus Boards

The post Konstant Lab SeventyPWR Eurorack Power Supply Bundle with PSU and Bus Boards appeared first on Elevator Sound.

A 5A power solution, 28 slots powered by four high-quality DC-DC converters.
ON/OFF 4HP – 3U module with 2 USB-A charging ports and a Power Button.

Friendly Plug and Play, tools are not required.

Features:

• 25 mm height over regulators grid and 15 mm height on the rest of the bus
• Horizontal connectors to maximize space
• 2,5mm barrel power connector
• On/Off 4HP module
• 2 USB-A charging ports

Specs:

• Power brick: 135W 2.5mm Barrel connector center positive (included)
• Current: +12V: 5A, -12V: 2,5A, 5V: 4A
• Measurements: 423 mm x 80mm
• Designed, kits prepared and completed modules assembled in Barcelona

Manufacturer Product Page HERE
Manufacturer Product Manual HERE

The post Befaco Trolley Bus Power Board and Module appeared first on Elevator Sound.

Supplied with Meanwell PSU, IEC cable and 2 x Konstant Lab Filtered Bus Boards.

The post Konstant Lab BoardPWR Eurorack Power Supply Bundle with PSU and Bus Boards appeared first on Elevator Sound.

Depth requirement: 2.5 inches
Included power supply rated for 100-240V input range. 

The post LZX Industries DC Distro 3A Eurorack Power Module appeared first on Elevator Sound.

Warning: make sure the total power draw for all connected modules does not exceed Pod power supply’s maximum power. See Pod manual for details

The post 4ms Multi Power 10 Pin Eurorack Cable appeared first on Elevator Sound.

– 10mm tall
– 41.6cm long
– 14 Horizontal power connectors
– Designed in Barcelona

The post Befaco Passive Bus Board (14 Connectors) appeared first on Elevator Sound.

The post Make Noise Strega Replacement Power Adapter appeared first on Elevator Sound.

The post 4ms Bus Stick – Eurorack Power Board w/ Shrouded Headers appeared first on Elevator Sound.

1UPWR is a powerful, low noise, high-efficiency power supply solution for use with eurorack systems and portable eurorack cases that feature 1U rails. Front panel contains a conveniently placed USB connector so you can charge external devices such as – your smartphone, tablet, lamp, or external sequencer.
1U PWR is also made from quality PCB with copper thickness of 70um, which ensures high reliability of 1UPWR and minimal power losses on dedicated PCB routes.

+12V / 2A
-12V / 1.2A
+5V / 1.5A

Supplied with Meanwell Power brick 18V / 60W

The post Konstant Lab 1U Eurorack Power Module and PSU (Intellijel) appeared first on Elevator Sound.

The right angle barrel cable is perfect for connecting any 4ms Powered Pods to each other or to other power supplies.

The post 4ms Power Barrel Connector Eurorack Cable (Right Angle) appeared first on Elevator Sound.