When used globally, the module offers a powerful window comparator whith CV-controlled top setting. The outputs benefit from three triple-position switches, allowing independently settable polarity and muting. Three LEDs indicate the output logic to keep track of what’s happening.

Features

• Two independent channels, A & B, also useable globally as a window comparator
• Normalized input A copies the signal into input B for window comparison
• Hi and Lo bipolar threshold adjustment knobs
• Hi input adds to the Hi setting knob
• Separate outputs for: above Hi setting, between Hi and Lo settings, below Lo setting
• 3-position switch on each output offers: Inverted Logic, Output Mute, Normal Logic
• Outputs can be ORed with a multiple
• Useable for audio or triggering
• Compact module

Specifications

• Width: 3hp
• Depth: 28mm
• Power: +12V 22mA / -12V 11mA

Manufacturer product page here.

The post Klavis ComPair Eurorack Window Dual Voltage Comparator Module (Silver) appeared first on Elevator Sound.

When used globally, the module offers a powerful window comparator whith CV-controlled top setting. The outputs benefit from three triple-position switches, allowing independently settable polarity and muting. Three LEDs indicate the output logic to keep track of what’s happening.

Features

• Two independent channels, A & B, also useable globally as a window comparator
• Normalized input A copies the signal into input B for window comparison
• Hi and Lo bipolar threshold adjustment knobs
• Hi input adds to the Hi setting knob
• Separate outputs for: above Hi setting, between Hi and Lo settings, below Lo setting
• 3-position switch on each output offers: Inverted Logic, Output Mute, Normal Logic
• Outputs can be ORed with a multiple
• Useable for audio or triggering
• Compact module

Specifications

• Width: 3hp
• Depth: 28mm
• Power: +12V 22mA / -12V 11mA

Manufacturer product page here.

The post Klavis ComPair Eurorack Window Dual Voltage Comparator Module (Black) appeared first on Elevator Sound.

It is a 4 channel selectable logic function module, with each channel having two inputs. All channels share the same logic function and the gate outs are summed with binary weights to create a stepped voltage to generate melodic or modulation signals from the outputs.

It pairs well with the Nibbler, other 4 bit logic modules, or any modules that generates gates (such as clock dividers and sequencers) and can also be used at audio rates.

Features

• 8 switched inputs
• 4 dual input logic functions (AND, OR, ADD, XOR)
• 4 gate outputs
• 1 stepped output
• LED indication for every input and output
• Works at LFO and audio rate

Specifications
Width: 8hp
Depth: 35mm
Power: +26mA, -10mA

Manufacturer product page here.
Product manual here.

The post Schlappi Engineering BTMX Eurorack 4 Channel Logic Module (Silver) appeared first on Elevator Sound.

It is a 4 channel selectable logic function module, with each channel having two inputs. All channels share the same logic function and the gate outs are summed with binary weights to create a stepped voltage to generate melodic or modulation signals from the outputs.

It pairs well with the Nibbler, other 4 bit logic modules, or any modules that generates gates (such as clock dividers and sequencers) and can also be used at audio rates.

Features

• 8 switched inputs
• 4 dual input logic functions (AND, OR, ADD, XOR)
• 4 gate outputs
• 1 stepped output
• LED indication for every input and output
• Works at LFO and audio rate

Specifications
Width: 8hp
Depth: 35mm
Power: +26mA, -10mA

Manufacturer product page here.
Product manual here.

The post Schlappi Engineering BTMX Eurorack 4 Channel Logic Module (Black) appeared first on Elevator Sound.

A comparator has two inputs and an output. The output goes high when the level of one input exceeds the other. Compare an external signal routed to the input with an internal threshold voltage set by the slider. What makes the 2hp CMP V2 a flexible utility is it is also possible to CV control the threshold as well. This makes it possible to compare two external signals. The internal threshold is set by the sum of the offset slide control and the CV input jack at the top of the module.

The range of the internal offset depends upon the position of the central push button switch.
ON – BIPOLAR MODE +/- 10v range
OFF – UNIPOLAR MODE 0-10v

Getting Started

• Patch the output to any module that reacts to gates and triggers, for example an envelope generator.
• Adjust the offset slider.
• The input signal will be compared with the built in offset (set by the slider and top CV jack) producing a gate at the output.
• The output gate will stay high as long as the input signal level is higher than the threshold voltage.
• Check you are in Bipolar mode. With nothing or 0V patched to the input jack the output will go high as the slider moves past the middle position.
• Now apply a bipolar CV signal to the input labeled IN, for example a triangle wave.
• The output will go high depending upon the position of the slider.
• As we increase the internal threshold the pulse width of the output should get smaller as now only the crests of the triangle wave are higher than the internal threshold.
• Now apply another CV signal to the top input jack labeled CV.
• A new threshold level is now created by combining the slider control offset and the CV signal routed to the top jack. This new threshold is compared with the input jack.
• Using two LFOs patched to the input and CV control will produce gate and trigger patterns depending upon the relationship between their levels but also shape and frequencies.

As well as being very useful for creating interesting rhythms the module also responds to audio rate signals. Create PWM type effects by feeding in an oscillator to the input and another oscillator to the CV input new waveforms can be generated.

Specifications

• Width: 2hp
• Depth: 25mm
• Power: +12v 2mA / -12v 4mA

Manufacturer product page here.

The post BeepBoop Electronics 2hp CMP V2 Eurorack Comparator Utility Module appeared first on Elevator Sound.

]]> https://www.elevatorsound.com/product/schlappi-engineering-nibbler-eurorack-shift-register-logic-module-black/ Mon, 11 Dec 2023 12:00:58 +0000 https://www.elevatorsound.com/?post_type=product&p=86393 The Nibbler is a logic module (a CMOS based four bit digital accumulator) which generates two stepped voltages and four gates in sync with an incoming clock. It explores the idea that counting in binary (and its expression in bits) is inherently musical, and with slow clock speeds we can use it to create both rhythms and modulation voltages (or melodies). At audio rate we can generate subharmonics and modem-like sounds (or noise). Features 5 rhythmically related gate outputs (or audio rate square waves) 2 stepped voltage outputs Second stepped voltage has selectable phase offset Cherry MX Brown switch for reset 4 gate inputs for modulation Chainable using carry in and out Reset input can be used as hard sync at audio rate Subtract input can add variation to sequences Synchronous and asynchronous output modes Shift register functionality CMOS logic design Specifications Width: 12hp Depth: 35mm Power: +12V 37mA, -12V 17mA Manufacturer product page here. Product manual here.

The post Schlappi Engineering Nibbler Eurorack Shift Register/Logic Module (Black) appeared first on Elevator Sound.

]]> The Nibbler is a logic module (a CMOS based four bit digital accumulator) which generates two stepped voltages and four gates in sync with an incoming clock.

It explores the idea that counting in binary (and its expression in bits) is inherently musical, and with slow clock speeds we can use it to create both rhythms and modulation voltages (or melodies). At audio rate we can generate subharmonics and modem-like sounds (or noise).

Features

• 5 rhythmically related gate outputs (or audio rate square waves)
• 2 stepped voltage outputs
• Second stepped voltage has selectable phase offset
• Cherry MX Brown switch for reset
• 4 gate inputs for modulation
• Chainable using carry in and out
• Reset input can be used as hard sync at audio rate
• Subtract input can add variation to sequences
• Synchronous and asynchronous output modes
• Shift register functionality
• CMOS logic design

Specifications
Width: 12hp
Depth: 35mm
Power: +12V 37mA, -12V 17mA
Manufacturer product page here.
Product manual here.

The post Schlappi Engineering Nibbler Eurorack Shift Register/Logic Module (Black) appeared first on Elevator Sound.

]]> https://www.elevatorsound.com/product/schlappi-engineering-nibbler-eurorack-shift-register-logic-module-silver/ Sat, 09 Dec 2023 14:42:21 +0000 https://www.elevatorsound.com/?post_type=product&p=86392 The Nibbler is a logic module (a CMOS based four bit digital accumulator) which generates two stepped voltages and four gates in sync with an incoming clock. It explores the idea that counting in binary (and its expression in bits) is inherently musical, and with slow clock speeds we can use it to create both rhythms and modulation voltages (or melodies). At audio rate we can generate subharmonics and modem-like sounds (or noise). Features 5 rhythmically related gate outputs (or audio rate square waves) 2 stepped voltage outputs Second stepped voltage has selectable phase offset Cherry MX Brown switch for reset 4 gate inputs for modulation Chainable using carry in and out Reset input can be used as hard sync at audio rate Subtract input can add variation to sequences Synchronous and asynchronous output modes Shift register functionality CMOS logic design Specifications Width: 12hp Depth: 35mm Power: +12V 37mA, -12V 17mA Manufacturer product page here. Product manual here.

The post Schlappi Engineering Nibbler Eurorack Shift Register/Logic Module (Silver) appeared first on Elevator Sound.

]]> The Nibbler is a logic module (a CMOS based four bit digital accumulator) which generates two stepped voltages and four gates in sync with an incoming clock.

It explores the idea that counting in binary (and its expression in bits) is inherently musical, and with slow clock speeds we can use it to create both rhythms and modulation voltages (or melodies). At audio rate we can generate subharmonics and modem-like sounds (or noise).

Features

• 5 rhythmically related gate outputs (or audio rate square waves)
• 2 stepped voltage outputs
• Second stepped voltage has selectable phase offset
• Cherry MX Brown switch for reset
• 4 gate inputs for modulation
• Chainable using carry in and out
• Reset input can be used as hard sync at audio rate
• Subtract input can add variation to sequences
• Synchronous and asynchronous output modes
• Shift register functionality
• CMOS logic design

Specifications
Width: 12hp
Depth: 35mm
Power: +12V 37mA, -12V 17mA
Manufacturer product page here.
Product manual here.

The post Schlappi Engineering Nibbler Eurorack Shift Register/Logic Module (Silver) appeared first on Elevator Sound.

]]> https://www.elevatorsound.com/product/atovproject-gaeto-eurorack-clock-divider-and-logic-module-black/ Mon, 31 Jul 2023 15:43:22 +0000 https://www.elevatorsound.com/?post_type=product&p=81505 The AtoVproject Gaeto is a new type of clocked logic module. Gaeto is a great module to play around with triggers, gates and legatoes turning one into the other. As a result we decided to name the module Gaeto from “Gate” and “Legato”. Some of the functions that the module can perform are: /2 /3 Clock divider Legato generator Trigger to gate converter Rhythm quantiser Sub octave generator with PWM Generative trigger sequencer The Gaeto’s function is to perform the following operation: “If the signal on the data input has been high, then the output is high at the next clock. If not – the non-output is high.” In other words, if the signal on the input signal goes over 1V then the memory stores a 1 if not it stores a 0. At the next clock the output will be high if a 1 was stored and the non output will be high if a 0 was stored. The output is coupled with an AND gate that allows for the outputs to either follow the pulse width of the clock or be maintained high until the next clock. This function is also CV controllable for interesting rhythm modulations. This […]

The post AtoVproject Gaeto Eurorack Clock Divider and Logic Module (Black) appeared first on Elevator Sound.

]]> The AtoVproject Gaeto is a new type of clocked logic module. Gaeto is a great module to play around with triggers, gates and legatoes turning one into the other. As a result we decided to name the module Gaeto from “Gate” and “Legato”.

Some of the functions that the module can perform are:

• /2 /3 Clock divider
• Legato generator
• Trigger to gate converter
• Rhythm quantiser
• Sub octave generator with PWM
• Generative trigger sequencer

The Gaeto’s function is to perform the following operation:
“If the signal on the data input has been high, then the output is high at the next clock. If not – the non-output is high.”

In other words, if the signal on the input signal goes over 1V then the memory stores a 1 if not it stores a 0. At the next clock the output will be high if a 1 was stored and the non output will be high if a 0 was stored.

The output is coupled with an AND gate that allows for the outputs to either follow the pulse width of the clock or be maintained high until the next clock. This function is also CV controllable for interesting rhythm modulations.

This rather obscure function allows for an extremely wide range of uses. This is a module that rewards exploration.

Additionally, multiple Gaetos can be chained together using the included cable to create shift register functions.

This design relies on CMOS CD4000 series ICs (4013 and 4081). These were selected for their reliability, high speed and low power consumption.

The Module is available with either Grey or Black panels, assembled or as a DIY kit.

Specifications

• Width: 6hp
• Depth: 20mm
• Power: +24mA / -12mA

Manufacturer product page here.
Product manual here.

The post AtoVproject Gaeto Eurorack Clock Divider and Logic Module (Black) appeared first on Elevator Sound.

]]> https://www.elevatorsound.com/product/atovproject-gaeto-eurorack-clock-divider-and-logic-module-silver/ Mon, 31 Jul 2023 15:43:39 +0000 https://www.elevatorsound.com/?post_type=product&p=81508 The AtoVproject Gaeto is a new type of clocked logic module. Gaeto is a great module to play around with triggers, gates and legatoes turning one into the other. As a result we decided to name the module Gaeto from “Gate” and “Legato”. Some of the functions that the module can perform are: /2 /3 Clock divider Legato generator Trigger to gate converter Rhythm quantiser Sub octave generator with PWM Generative trigger sequencer The Gaeto’s function is to perform the following operation: “If the signal on the data input has been high, then the output is high at the next clock. If not – the non-output is high.” In other words, if the signal on the input signal goes over 1V then the memory stores a 1 if not it stores a 0. At the next clock the output will be high if a 1 was stored and the non output will be high if a 0 was stored. The output is coupled with an AND gate that allows for the outputs to either follow the pulse width of the clock or be maintained high until the next clock. This function is also CV controllable for interesting rhythm modulations. This […]

The post AtoVproject Gaeto Eurorack Clock Divider and Logic Module (Silver) appeared first on Elevator Sound.

]]> The AtoVproject Gaeto is a new type of clocked logic module. Gaeto is a great module to play around with triggers, gates and legatoes turning one into the other. As a result we decided to name the module Gaeto from “Gate” and “Legato”.

Some of the functions that the module can perform are:

• /2 /3 Clock divider
• Legato generator
• Trigger to gate converter
• Rhythm quantiser
• Sub octave generator with PWM
• Generative trigger sequencer

The Gaeto’s function is to perform the following operation:
“If the signal on the data input has been high, then the output is high at the next clock. If not – the non-output is high.”

In other words, if the signal on the input signal goes over 1V then the memory stores a 1 if not it stores a 0. At the next clock the output will be high if a 1 was stored and the non output will be high if a 0 was stored.

The output is coupled with an AND gate that allows for the outputs to either follow the pulse width of the clock or be maintained high until the next clock. This function is also CV controllable for interesting rhythm modulations.

This rather obscure function allows for an extremely wide range of uses. This is a module that rewards exploration.

Additionally, multiple Gaetos can be chained together using the included cable to create shift register functions.

This design relies on CMOS CD4000 series ICs (4013 and 4081). These were selected for their reliability, high speed and low power consumption.

The Module is available with either Grey or Black panels, assembled or as a DIY kit.

Specifications

• Width: 6hp
• Depth: 20mm
• Power: +24mA / -12mA

Manufacturer product page here.
Product manual here.

The post AtoVproject Gaeto Eurorack Clock Divider and Logic Module (Silver) appeared first on Elevator Sound.

]]> https://www.elevatorsound.com/product/making-sound-machines-x-divkid-divskip-eurorack-four-channel-trigger-gate-processor-module/ Thu, 19 Sep 2024 13:00:48 +0000 https://www.elevatorsound.com/?post_type=product&p=93488 DivSkip is a 4 channel Trigger / Gate processor for Eurorack. Eight modes on four independent channels make this 8HP module a Swiss Army Knife to chain behind clock utilities, trigger sequencers, logic modules, and LFOs. It processes their output to overlay rhythmic patterns, randomness, chance, speed ramps, ratchets, or variable gate length. A / B outputs allow you to stack multiple modes of logic processing by self-patching the module. Toggle switches and Click-to-Mute knobs facilitate an immediate, improvisational workflow. The visualization on its LED rings keeps it intuitive and easy to understand. DivSkip is the first module collaboration between UK musician and video creator DivKid and Making Sound Machines, a duo of synth makers from Germany. Specifications Width: 8hp Power: +12V 45mA / -12V 15mA Manufacturer product page here. Product manual here.

The post Making Sound Machines X DivKid DivSkip Eurorack Four Channel Trigger Gate Processor Module appeared first on Elevator Sound.

]]> DivSkip is a 4 channel Trigger / Gate processor for Eurorack.

Eight modes on four independent channels make this 8HP module a Swiss Army Knife to chain behind clock utilities, trigger sequencers, logic modules, and LFOs. It processes their output to overlay rhythmic patterns, randomness, chance, speed ramps, ratchets, or variable gate length. A / B outputs allow you to stack multiple modes of logic processing by self-patching the module. Toggle switches and Click-to-Mute knobs facilitate an immediate, improvisational workflow. The visualization on its LED rings keeps it intuitive and easy to understand.

DivSkip is the first module collaboration between UK musician and video creator DivKid and Making Sound Machines, a duo of synth makers from Germany.

Specifications

• Width: 8hp
• Power: +12V 45mA / -12V 15mA

Manufacturer product page here.
Product manual here.

The post Making Sound Machines X DivKid DivSkip Eurorack Four Channel Trigger Gate Processor Module appeared first on Elevator Sound.

]]>