Features

• 1 input / 5 outputs
• 3.5 mm adapter splits line into five 3.5 mm ports
• Connectors: 6 x TS 3.5mm mono socket

The post Befaco Star Multiple Eurorack One Into Five Multiple Adapter (3 Pack) appeared first on Elevator Sound.

Mult Squid is a passive splitter 1×6, a simple but useful complement that lets you send a signal to multiple destinations.

Features

• 6 way passive multiple on patch cable format
• Strong and durable construction
• 1x TS Minijack 3.5mm plug to 6x TS Minijack 3.5 mm sockets
• 20 mm long
• 0HP
• 2 cables per pack

The post Befaco Squid Cable Eurorack One Into Six Multiple Cable (2 Pack) appeared first on Elevator Sound.

For each unit the operating mode can be selected: Toggle or Level controlled. In Toggle mode the rising edge of the CV input or operating the manual control button changes the state of the switch. In Level mode the switch state is defined by the voltage applied to the CV input (low voltage = I/O1, high voltage = I/O2) or by the state of the manual control button (not pressed = I/O1, pressed = I/O2). The modes are programmed very easily: Operating the Toggle/Level button of the program section displays the current state of each switch with the LEDs: left LED on = Toggle mode, right LED on = Level mode. Operating the manual control button of the switch in question changes the toggle/level mode while the Toggle/Level button of the program section is operated. During the programming possibly patched CV signals have to be removed as the CV signals would interfere with the manual operating buttons during the programming process.

In addition it’s possible to define master/slave groups. In such a group the upper unit (= master) controls also the state of the following switches provided that they are defined as slaves. Master/slave programming is also very simple: Operating the Master/Slave button of the program section displays the current state of each switch with the LEDs: left LED on = Master, right LED on = Slave. Operating the manual control button of the switch in question changes the master/slave mode while the Master/Slave button of the program section is operated. During the programming possibly patched CV signals have to be removed as the CV signals would interfere with the manual operating buttons during the programming process.
When all 8 units are defined as master all switches are independent from each other. If for example the sequence is MSSSMSMS the control unit of the first switch also controls the switches 2, 3 and 4. The control unit of switch 5 also controls the switch 6, and the control unit of switch 7 also controls the switch 8. The current states of the slave switches are overwritten by the state of the master switch.

Specifications
Width: 12hp
Depth: 55mm
Power: +40mA, -5mA
Manufacturer product page here.

The post Doepfer A-150-8 Octal Eurorack Programmable Switches Module appeared first on Elevator Sound.

It includes a stereo line input converter for incorporating line level external sources into a Eurorack system, a fixed 4 input mixer with breakout attenuator for combining signals, a gated slew limiter for adding slides to sequences, a sample and hold with analog white noise with a myriad of uses such as generative melodies or producing percussive textures and finally a buffered mult for droop free signal distribution with handy LEDs to monitor.

All sections are normalised to help with typical use cases such as generating random CV from the sample & hold section, a smooth random source from the slew output and breaking out a standalone attenuator from the fourth mixer input.

The ‘MEGA MILTON’ provides essential classic synthesizer building blocks for patching in any Eurorack system.

Features

• Stereo line in to Eurorack level converter & mono splitter.
• Four input summing mixer with break out attenuator.
• Slew limiter circuit with gate input for switching on and off.
• High quality sample & hold circuit with low ‘droop rate’.
• Analog White noise generator.
• Buffered multiple with LED polarity indicators.
• Normalisation between sections for simplified patching.
• Skiff friendly with reverse power protection.
• 2 Year Warranty
• Made in England.

Specifications

• Width: 8hp
• Depth: 32mm
• Power: +12v 70mA / -12v 70mA

Manufacturer product page here.
Product manual here.

The post ALM Busy Circuits Mega Milton Eurorack Utility Module appeared first on Elevator Sound.

Duplication

Mimix has two independent multiples, A and B, each with four available copies of either audio or CV. Unlike passive multiples, these buffered copies use active circuitry to ensure there is no signal loss or interaction between the signals.

Additionally, the input impedance is very high so the source signal is essentially unaltered, and precision components are used so that each copy is identical. This is necessary when copying voltages scaled to 1V/oct for pitch control of oscillators and sound sources.

The two multiple sections, A and B, each have two WHITE LEDs which help to visualize the strengths and polarities of the input signals.
Augmentation

Identical copies are ideal for many applications, but not necessarily for experimentation. For this reason, the fourth output of each multiple is an augmented copy derived from the source signal.

Multiple A has an inverted copy labeled A INV, which has its polarity flipped. When the source signal voltage is positive, this output is negative. When the source signal voltage is negative, this output is positive. This is useful for patching opposing modulation signals.

Multiple B has a rectified copy labeled B RECT, which outputs a full-wave rectified copy of the source signal that is always positive. When the voltage of the source signal is negative, the output is inverted. This is useful to control parameters which typically require a positive modulation signal, such as VCAs. It can also be used to distort audio signals, and much more.

Combination

The last of the module’s three sections is a 4-input mixer. The summing circuit combines all four inputs at unity gain to the SUM output. This is useful for creating interesting modulations or mixing several audio signals together to a single output.

By default, the first two inputs, [A] and [B], are normalled to the inputs of the two multiples. However, they may be replaced by plugging other signals into their respective input jacks. Inputs C and D are for additional external sources which can be added to the mix.

Similar to the two multiple sections, there are two WHITE LEDs to indicate the strength and polarity of the mixed signal at the SUM output jack.

Features

• 1 to 4 buffered multiple with inverted 4th copy
• 1 to 4 buffered multiple with rectified 4th copy
• 4 to 1 unity mixer normalled to the two multiples
• Bipolar LED signal indicators for each section

Specifications

• Width: 6hp
• Depth: 25mm
• Power: +40mA / -40mA

Manufacturer product page here.
Product manual here.

The post Boredbrain Mimix Eurorack Dual Multiple and Unity Mixer Module appeared first on Elevator Sound.

Intellijel Format

Specifications
Width: 10hp
Depth: 20mm
Power: 15mA @ +12V, 15mA @ -12v

Manufacturer product page here.

The post Plum Audio Buffered Multiple 1U (Black) appeared first on Elevator Sound.

Intellijel Format

Specifications
Width: 10hp
Depth: 20mm
Power: 15mA @ +12V, 15mA @ -12v

Manufacturer product page here.

The post Plum Audio Buffered Multiple 1U (Silver) appeared first on Elevator Sound.

Features

• 4 channel passive multiple.
• Durable plastic enclosure.
• High quality gold-plated PCB-mounted jacks.
• Fully serviceable (just undo two screws to access the jacks).
• Optional Super strong rare-earth neodymium magnets on both sides of the enclosure. The magnets allow the hubs to be stacked or attached to metal or magnetic strips on your case. They can even attach to screws.

Manufacturer product page here

The post Intellijel Hub 4 Channel Passive Eurorack Signal Multiplier (With Magnet) appeared first on Elevator Sound.

The compact combination of different circuits into 4hp makes this a very useful utility for all types of system.

All sections are DC coupled for use with both audio and DC signal and feature bipolar LEDs for signal monitoring.

This Bonds & structures is a redesign of the original Mutable instruments Links module built with the same high quality parts.

Lovingly hand built at Beepboop Electronics Workshop in Bristol, UK. Includes power ribbon, mounting screws and 1 year Warranty

Specifications
Width: 4hp
Depth: 35mm
Power: 15 mA +12V, 15 mA -12V

Product manual here.

The post BeepBoop Electronics Bonds & Structures Eurorack Mutable Links Clone Module appeared first on Elevator Sound.

Specifications
Width: 4hp
Depth: 25mm
Power: +11mA, -8mA

Manufacturer product page here.
Product manual here.

The post Acid Rain Technology Junction Eurorack Attenuverter/Mixer/Multiple Module appeared first on Elevator Sound.