Scale Archives - Elevator Sound https://www.elevatorsound.com/product-category/modular/modular-utility/modular-scale/ Eurorack Modular, Synthesizer & Electronic Music Hardware Store Thu, 12 Dec 2024 16:37:46 +0000 en-GB hourly 1 https://wordpress.org/?v=6.7.1 Klavis Tweakers Plus Eurorack Dual Gain Offset Polarity Mute CV Processor Module (Black) https://www.elevatorsound.com/product/klavis-tweakers-plus-eurorack-dual-gain-offset-polarity-mute-cv-processor-module-black/ Thu, 14 Nov 2024 16:13:31 +0000 https://www.elevatorsound.com/?post_type=product&p=94937 The Tweakers Plus is a 1U slim companion module that allows fine tuning your modulations. Two channels offer control over gain and offset. A three-position switch allows muting the channel and inverting the modulation polarity without impacting the offset. A pair of LEDs tell the amplitude and polarity of the output signal; with audio signals, both LEDs light up together! Normalizing of the inputs avoids using a multiple when a signal is dispatched to two targets. Normalizing of the outputs offers an extra mixer, summing the two channels, very handy as an audio mixer too. The Tweakers Plus is a perfect companion for modules whose modulation inputs lack such amenities. Activating predefined settings at the flick of a switch is paramount for live situations. Being able to prepare two sets of carefully adjusted settings for a given signal is even more useful. Features Two independent channels also useable jointly as a mixer or splitter Offset setting is independent of the polarity switch Normalized input A can distribute the signal in both channels Normalized outputs can mix the two channels on out B Useable for audio Specifications Width: 16hp Depth: 33mm Power: +12V 23mA / -12V 25mA Manufacturer product page here.

The post Klavis Tweakers Plus Eurorack Dual Gain Offset Polarity Mute CV Processor Module (Black) appeared first on Elevator Sound.

]]> The Tweakers Plus is a 1U slim companion module that allows fine tuning your modulations.

Two channels offer control over gain and offset. A three-position switch allows muting the channel and inverting the modulation polarity without impacting the offset. A pair of LEDs tell the amplitude and polarity of the output signal; with audio signals, both LEDs light up together!

Normalizing of the inputs avoids using a multiple when a signal is dispatched to two targets. Normalizing of the outputs offers an extra mixer, summing the two channels, very handy as an audio mixer too.

The Tweakers Plus is a perfect companion for modules whose modulation inputs lack such amenities. Activating predefined settings at the flick of a switch is paramount for live situations. Being able to prepare two sets of carefully adjusted settings for a given signal is even more useful.

Features

  • Two independent channels also useable jointly as a mixer or splitter
  • Offset setting is independent of the polarity switch
  • Normalized input A can distribute the signal in both channels
  • Normalized outputs can mix the two channels on out B
  • Useable for audio

Specifications

  • Width: 16hp
  • Depth: 33mm
  • Power: +12V 23mA / -12V 25mA

Manufacturer product page here.

The post Klavis Tweakers Plus Eurorack Dual Gain Offset Polarity Mute CV Processor Module (Black) appeared first on Elevator Sound.

]]> Make Noise Channel Saver Eurorack Attenuverter Mixer Module https://www.elevatorsound.com/product/make-noise-channel-saver-eurorack-attenuverter-mixer-module/ Mon, 29 Apr 2024 16:00:30 +0000 https://www.elevatorsound.com/?post_type=product&p=90065 The Channel Saver music synthesizer module is a small utility module, offering several channels of signal-processing that will be useful in just about any modular system. As a condensation/extension of the sum/offset/attenuversion aspects of MATHS, it continues the great tradition of sculpting the control signals we use to sculpt our sound signals. Features Scale, amplify, attenuate, or invert an incoming signal using Channels 1 or 2 Generate DC offsets when Channel 1 or 2 is unpatched Crossfade between two signals, or attenuate one signal, using Channel 3 SUM and INVerted Sum Bus for addition, subtraction, mirroring, inversion etc. Individual Channel Outputs for Channels 1 and 2 allow independent use of all three channels Anywhere you need more subtle modulation, Ch. Svr is there for you… now all your eurorack slivers may have subtle and intentional modulation they deserve! Specifications Width: 6hp Depth: 30mm Power: +12v 20mA / -12v 10mA Manufacturer product page here. Product manual here.

The post Make Noise Channel Saver Eurorack Attenuverter Mixer Module appeared first on Elevator Sound.

]]> The Channel Saver music synthesizer module is a small utility module, offering several channels of signal-processing that will be useful in just about any modular system. As a condensation/extension of the sum/offset/attenuversion aspects of MATHS, it continues the great tradition of sculpting the control signals we use to sculpt our sound signals.

Features

  • Scale, amplify, attenuate, or invert an incoming signal using Channels 1 or 2
  • Generate DC offsets when Channel 1 or 2 is unpatched
  • Crossfade between two signals, or attenuate one signal, using Channel 3
  • SUM and INVerted Sum Bus for addition, subtraction, mirroring, inversion etc.
  • Individual Channel Outputs for Channels 1 and 2 allow independent use of all three channels
  • Anywhere you need more subtle modulation, Ch. Svr is there for you… now all your eurorack slivers may have subtle and intentional modulation they deserve!

Specifications

  • Width: 6hp
  • Depth: 30mm
  • Power: +12v 20mA / -12v 10mA

Manufacturer product page here.
Product manual here.

The post Make Noise Channel Saver Eurorack Attenuverter Mixer Module appeared first on Elevator Sound.

]]> Tiptop Audio ART V/Oct Quantizer Eurorack Module https://www.elevatorsound.com/product/tiptop-art-v-oct-quantizer-eurorack-module/ Tue, 27 Feb 2024 14:09:54 +0000 https://www.elevatorsound.com/?post_type=product&p=88404 Is a four channel CV to ART Quantizer to play ART oscillators from CV sequencers, LFOs and anything that outputs CV. This is our second ART controller option and is designed for those of us playing ART without a computer or MIDI source. The inputs take in positive, negative, bipolar CV voltages. Scales include Major Minor and the five other modes (Dorian, Lydian, etc). The module is simple to set up with a simple menu and one knob with switch for navigation. The 4th channel can be set to generate Chords and polyphonic note streams for ART Polyphonic oscillators. Specifications Width: 8hp Depth: 40mm Power: +38mA, -4mA Manufacturer product page here. Product manual here.

The post Tiptop Audio ART V/Oct Quantizer Eurorack Module appeared first on Elevator Sound.

]]> Is a four channel CV to ART Quantizer to play ART oscillators from CV sequencers, LFOs and anything that outputs CV. This is our second ART controller option and is designed for those of us playing ART without a computer or MIDI source. The inputs take in positive, negative, bipolar CV voltages. Scales include Major Minor and the five other modes (Dorian, Lydian, etc). The module is simple to set up with a simple menu and one knob with switch for navigation. The 4th channel can be set to generate Chords and polyphonic note streams for ART Polyphonic oscillators.

Specifications
Width: 8hp
Depth: 40mm
Power: +38mA, -4mA
Manufacturer product page here.
Product manual here.

The post Tiptop Audio ART V/Oct Quantizer Eurorack Module appeared first on Elevator Sound.

]]> ALM Busy Circuits Mega Milton Eurorack Utility Module https://www.elevatorsound.com/product/alm-busy-circuits-mega-milton-eurorack-utility-module/ Fri, 19 Jan 2024 14:00:35 +0000 https://www.elevatorsound.com/?post_type=product&p=87322 The ‘MEGA MILTON’ is a smorgasbord of handy all analog utilities in just 8HP that will greatly extend the functionality of your Eurorack system. It includes a stereo line input converter for incorporating line level external sources into a Eurorack system, a fixed 4 input mixer with breakout attenuator for combining signals, a gated slew limiter for adding slides to sequences, a sample and hold with analog white noise with a myriad of uses such as generative melodies or producing percussive textures and finally a buffered mult for droop free signal distribution with handy LEDs to monitor. All sections are normalised to help with typical use cases such as generating random CV from the sample & hold section, a smooth random source from the slew output and breaking out a standalone attenuator from the fourth mixer input. The ‘MEGA MILTON’ provides essential classic synthesizer building blocks for patching in any Eurorack system. Features Stereo line in to Eurorack level converter & mono splitter. Four input summing mixer with break out attenuator. Slew limiter circuit with gate input for switching on and off. High quality sample & hold circuit with low ‘droop rate’. Analog White noise generator. Buffered multiple with LED […]

The post ALM Busy Circuits Mega Milton Eurorack Utility Module appeared first on Elevator Sound.

]]> The ‘MEGA MILTON’ is a smorgasbord of handy all analog utilities in just 8HP that will greatly extend the functionality of your Eurorack system.

It includes a stereo line input converter for incorporating line level external sources into a Eurorack system, a fixed 4 input mixer with breakout attenuator for combining signals, a gated slew limiter for adding slides to sequences, a sample and hold with analog white noise with a myriad of uses such as generative melodies or producing percussive textures and finally a buffered mult for droop free signal distribution with handy LEDs to monitor.

All sections are normalised to help with typical use cases such as generating random CV from the sample & hold section, a smooth random source from the slew output and breaking out a standalone attenuator from the fourth mixer input.

The ‘MEGA MILTON’ provides essential classic synthesizer building blocks for patching in any Eurorack system.

Features

  • Stereo line in to Eurorack level converter & mono splitter.
  • Four input summing mixer with break out attenuator.
  • Slew limiter circuit with gate input for switching on and off.
  • High quality sample & hold circuit with low ‘droop rate’.
  • Analog White noise generator.
  • Buffered multiple with LED polarity indicators.
  • Normalisation between sections for simplified patching.
  • Skiff friendly with reverse power protection.
  • 2 Year Warranty
  • Made in England.

Specifications

  • Width: 8hp
  • Depth: 32mm
  • Power: +12v 70mA / -12v 70mA

Manufacturer product page here.
Product manual here.

The post ALM Busy Circuits Mega Milton Eurorack Utility Module appeared first on Elevator Sound.

]]> Joranalogue Bias 2 Eurorack Precision Scaler and Offsetter Module https://www.elevatorsound.com/product/joranalogue-bias-2-eurorack-precision-scaler-and-offsetter-module/ Mon, 03 Jul 2023 17:12:41 +0000 https://www.elevatorsound.com/?post_type=product&p=80628 Voltage control is the basic tenant of modular synthesis: parameters may be modulated by changing control voltages (CVs), simply by plugging in a patch cable. However, during patching it’s common to encounter incompatible voltage ranges, with signal outputs and inputs having different amplitudes and sensitivities. An indispensable utility module, Bias 2 provides a compact yet precise solution to quickly interface signals between modules within a Eurorack modular system, without interrupting your creativity. Comprising of two independent sections, each with dual inputs and dual outputs, its carefully selected combination of normalised reference voltages and amplification/attenuation factors makes it a breeze to convert between the most common signal ranges: -5 to +5 V, 0 to +5 V and 0 to +10 V. Precision comes standard on Bias 2, with meticulously engineered analogue signal paths providing absolutely transparent performance for any Eurorack signal: CV, audio or gates/triggers. Beyond the voltage conversion application, Bias 2 is a true all-rounder, capable of functioning as a pair of dual input unity gain mixers, -6 and +6 dB audio gain stages or a multi-output fixed voltage source. Features Precision analogue dual scaler/offsetter in an ultra-narrow 2 HP. Designed to simplify interfacing between common Eurorack voltage ranges: -5 […]

The post Joranalogue Bias 2 Eurorack Precision Scaler and Offsetter Module appeared first on Elevator Sound.

]]> Voltage control is the basic tenant of modular synthesis: parameters may be modulated by changing control voltages (CVs), simply by plugging in a patch cable. However, during patching it’s common to encounter incompatible voltage ranges, with signal outputs and inputs having different amplitudes and sensitivities.

An indispensable utility module, Bias 2 provides a compact yet precise solution to quickly interface signals between modules within a Eurorack modular system, without interrupting your creativity.

Comprising of two independent sections, each with dual inputs and dual outputs, its carefully selected combination of normalised reference voltages and amplification/attenuation factors makes it a breeze to convert between the most common signal ranges: -5 to +5 V, 0 to +5 V and 0 to +10 V.

Precision comes standard on Bias 2, with meticulously engineered analogue signal paths providing absolutely transparent performance for any Eurorack signal: CV, audio or gates/triggers.

Beyond the voltage conversion application, Bias 2 is a true all-rounder, capable of functioning as a pair of dual input unity gain mixers, -6 and +6 dB audio gain stages or a multi-output fixed voltage source.

Features

  • Precision analogue dual scaler/offsetter in an ultra-narrow 2 HP.
  • Designed to simplify interfacing between common Eurorack voltage ranges: -5 to +5 V, 0 to +5 V and 0 to +10 V.
  • Each section can be configured to add or average signals.
  • Top section has a +5 V reference normal and ÷2 attenuation output, bottom section a ?5 V normal and ×2 gain output.
  • High gain accuracy, very low offset, noise and distortion, flat bandwidth to 20 kHz: suitable for any signal.
  • Impedance-compensated outputs.
  • Precision-milled 2 mm anodised aluminium front panel with high-resolution, non-erasable graphics.
  • Bullet-proof design: polarised power header and MOSFET protection circuit.
  • Includes 16-to-10-pin Eurorack power ribbon cable.
  • Premium mounting hardware: black screws, black nylon washers and matching hex key.
  • High-quality components and assembly; designed and made in Belgium.

Specifications

  • Width: 2hp
  • Depth: 40mm
  • Power: +20mA / -20mA

Manufacturer product page here.

The post Joranalogue Bias 2 Eurorack Precision Scaler and Offsetter Module appeared first on Elevator Sound.

]]> Apollo View IOU Eurorack CV Attenuator And Offseter Module https://www.elevatorsound.com/product/apollo-view-iou-eurorack-cv-attenuator-and-offseter-module/ Thu, 16 May 2024 16:32:55 +0000 https://www.elevatorsound.com/?post_type=product&p=90586 IOU is designed for versatile signal processing, suitable for both CV and audio inputs. It features a single-channel attenuverter and a slider potentiometer, which provides up to +5V of precise offset control. A unique feature, resulting from a request by DivKid, is the ability to apply the offset either Pre or Post-attenuverter. When set to Pre-attenuverter, IOU allows for detailed, granular offsets across the entire slider range, offering fine-tuned control. Additionally, the IOU includes a selectable gain setting, allowing a choice between 1x and 2x. This feature is useful for amplifying subtle inputs or extending the Offset control range up to +10V with the 2x setting. Equipped with both standard and inverted outputs, the IOU efficiently generates the necessary CV for other modules to implement techniques like sidechain compressor effects. This capability greatly enhances the versatility of any Eurorack setup, allowing for more intricate and creative patching possibilities. IOU is an indispensable tool for signal scaling, inversion, and voltage offset. Features Compact Design – 2HP Eurorack module, ideal for space-efficient setups Single-Channel Attenuverter – Allows precise scaling and inversion of incoming signals Slider Potentiometer – Provides up to +5V offset control for detailed signal modulation Switchable Offset Functionality – Inspired […]

The post Apollo View IOU Eurorack CV Attenuator And Offseter Module appeared first on Elevator Sound.

]]> IOU is designed for versatile signal processing, suitable for both CV and audio inputs. It features a single-channel attenuverter and a slider potentiometer, which provides up to +5V of precise offset control. A unique feature, resulting from a request by DivKid, is the ability to apply the offset either Pre or Post-attenuverter. When set to Pre-attenuverter, IOU allows for detailed, granular offsets across the entire slider range, offering fine-tuned control.

Additionally, the IOU includes a selectable gain setting, allowing a choice between 1x and 2x. This feature is useful for amplifying subtle inputs or extending the Offset control range up to +10V with the 2x setting.

Equipped with both standard and inverted outputs, the IOU efficiently generates the necessary CV for other modules to implement techniques like sidechain compressor effects. This capability greatly enhances the versatility of any Eurorack setup, allowing for more intricate and creative patching possibilities. IOU is an indispensable tool for signal scaling, inversion, and voltage offset.

Features

  • Compact Design – 2HP Eurorack module, ideal for space-efficient setups
  • Single-Channel Attenuverter – Allows precise scaling and inversion of incoming signals
  • Slider Potentiometer – Provides up to +5V offset control for detailed signal modulation
  • Switchable Offset Functionality – Inspired by DivKid, with the option to apply offset Pre or Post-attenuverter for nuanced control
  • 1x and 2x Gain Switch – Offers flexibility in amplifying input signals, suitable for both subtle and more pronounced adjustments
  • Dual Outputs – Standard and inverted outputs for versatile patching and complex signal processing
  • Facilitates Creative Patching – Generates the necessary CV for enabling other modules to perform techniques like sidechain compressor effects, thereby enriching the dynamics in mixes
  • Essential Signal Processing Tool – Effective for both CV and audio signals, aiding in precise modulation and control within a Eurorack system

Specifications

  • Width: 2hp
  • Depth: 30mm
  • Power: +12v 15mA / -12v 5mA

Manufacturer product page here.
Product manual here.

The post Apollo View IOU Eurorack CV Attenuator And Offseter Module appeared first on Elevator Sound.

]]> Plum Audio VASAT Eurorack Attenuvert Mix and Offset Module (1U – Silver) https://www.elevatorsound.com/product/plum-audio-vasat-eurorack-attenuvert-mix-and-offset-module-1u-silver/ Thu, 22 Dec 2022 14:45:52 +0000 https://www.elevatorsound.com/?post_type=product&p=72077 VASAT is a dual channel expandable Mixer / Attenuverter / Offset and precision voltage source with variable range. Features VASAT can process two channels of audio or CV. Polarity push buttons can configure knobs to work as attenuators or as attenuverters. Unconnected inputs are normalized to an internal precision voltage source which can produce either a +2.5V, +5V, +7.5V or +10V. VASAT outputs are limited to -/+ 10V to protect against clipping. VASAT outputs are daisy-chained allowing channels to be mixed. VASATis expandable – Several units can be chained together to get a bigger mixer. Specifications Width: 10hp Depth: 20mm Power: +20mA / -20mA Manufacturer product page here. Product manual here.

The post Plum Audio VASAT Eurorack Attenuvert Mix and Offset Module (1U – Silver) appeared first on Elevator Sound.

]]> VASAT is a dual channel expandable Mixer / Attenuverter / Offset and precision voltage source with variable range.

Features

  • VASAT can process two channels of audio or CV.
  • Polarity push buttons can configure knobs to work as attenuators or as attenuverters.
  • Unconnected inputs are normalized to an internal precision voltage source which can produce either a +2.5V, +5V, +7.5V or +10V.
  • VASAT outputs are limited to -/+ 10V to protect against clipping.
  • VASAT outputs are daisy-chained allowing channels to be mixed.
  • VASATis expandable – Several units can be chained together to get a bigger mixer.

Specifications

  • Width: 10hp
  • Depth: 20mm
  • Power: +20mA / -20mA

Manufacturer product page here.
Product manual here.

The post Plum Audio VASAT Eurorack Attenuvert Mix and Offset Module (1U – Silver) appeared first on Elevator Sound.

]]> Plum Audio VASAT Eurorack Attenuvert Mix and Offset Module (1U – Black) https://www.elevatorsound.com/product/plum-audio-vasat-eurorack-attenuvert-mix-and-offset-module-1u-black/ Thu, 22 Dec 2022 14:42:35 +0000 https://www.elevatorsound.com/?post_type=product&p=72072 VASAT is a dual channel expandable Mixer / Attenuverter / Offset and precision voltage source with variable range. Features VASAT can process two channels of audio or CV. Polarity push buttons can configure knobs to work as attenuators or as attenuverters. Unconnected inputs are normalized to an internal precision voltage source which can produce either a +2.5V, +5V, +7.5V or +10V. VASAT outputs are limited to -/+ 10V to protect against clipping. VASAT outputs are daisy-chained allowing channels to be mixed. VASATis expandable – Several units can be chained together to get a bigger mixer. Specifications Width: 10hp Depth: 20mm Power: +20mA / -20mA Manufacturer product page here. Product manual here.

The post Plum Audio VASAT Eurorack Attenuvert Mix and Offset Module (1U – Black) appeared first on Elevator Sound.

]]> VASAT is a dual channel expandable Mixer / Attenuverter / Offset and precision voltage source with variable range.

Features

  • VASAT can process two channels of audio or CV.
  • Polarity push buttons can configure knobs to work as attenuators or as attenuverters.
  • Unconnected inputs are normalized to an internal precision voltage source which can produce either a +2.5V, +5V, +7.5V or +10V.
  • VASAT outputs are limited to -/+ 10V to protect against clipping.
  • VASAT outputs are daisy-chained allowing channels to be mixed.
  • VASATis expandable – Several units can be chained together to get a bigger mixer.

Specifications

  • Width: 10hp
  • Depth: 20mm
  • Power: +20mA / -20mA

Manufacturer product page here.
Product manual here.

The post Plum Audio VASAT Eurorack Attenuvert Mix and Offset Module (1U – Black) appeared first on Elevator Sound.

]]> After Later Audio Monocle Eurorack VC Polarizer Module (Mutable Instruments Blinds Clone) https://www.elevatorsound.com/product/after-later-audio-monocle-eurorack-vc-polarizer-module-mutable-instruments-blinds-clone/ Mon, 14 Nov 2022 19:36:38 +0000 https://www.elevatorsound.com/?post_type=product&p=69771 Monocle is half of a Mutable Instruments Blinds. It has in/out pin headers on the back of the module so you can daisy chain multiple together. You can also daisy chain with our DVCA module as well. Specifications Width: 4hp Depth: 25mm Power: +35mA / -35mA Manufacturer product page here. Product manual here.

The post After Later Audio Monocle Eurorack VC Polarizer Module (Mutable Instruments Blinds Clone) appeared first on Elevator Sound.

]]> Monocle is half of a Mutable Instruments Blinds. It has in/out pin headers on the back of the module so you can daisy chain multiple together. You can also daisy chain with our DVCA module as well.

Specifications

  • Width: 4hp
  • Depth: 25mm
  • Power: +35mA / -35mA

Manufacturer product page here.
Product manual here.

The post After Later Audio Monocle Eurorack VC Polarizer Module (Mutable Instruments Blinds Clone) appeared first on Elevator Sound.

]]> Befaco x Molten Modular Motion MTR 3U Eurorack Attenuverter, Mixer and Visualiser Module https://www.elevatorsound.com/product/molten-modular-motion-mtr-eurorack-attenuverter-mixer-and-visualiser-module/ Tue, 15 Nov 2022 19:00:55 +0000 https://www.elevatorsound.com/?post_type=product&p=69763 Motion MTR allow you to mix, attenuate and invert signals while having clear visual feedback of their levels. Each channel can function as: Audio level control with VU meter CV attenuator with voltage meter CV inverter with voltage meter Each input is normalled to 10v, so you can use each of them to generate fixed voltages. Also, the outputs of channels 1 and 2 are summed into Out 3 to be used as a mixer. Patch it wildly to make it work as an attenuverter with offset, as a mixer, a VU meter or a combination of them all! Features Three channels attenuator CV and inverted CV visualization Audio VU meter mode Normalled inputs to 10v Outputs summed at OUT3 Specifications Width: 6hp Depth: 30mm Power: +110mA / -43mA Manufacturer product page here. Product manual here.

The post Befaco x Molten Modular Motion MTR 3U Eurorack Attenuverter, Mixer and Visualiser Module appeared first on Elevator Sound.

]]> Motion MTR allow you to mix, attenuate and invert signals while having clear visual feedback of their levels. Each channel can function as:

  • Audio level control with VU meter
  • CV attenuator with voltage meter
  • CV inverter with voltage meter

Each input is normalled to 10v, so you can use each of them to generate fixed voltages. Also, the outputs of channels 1 and 2 are summed into Out 3 to be used as a mixer. Patch it wildly to make it work as an attenuverter with offset, as a mixer, a VU meter or a combination of them all!

Features

  • Three channels attenuator
  • CV and inverted CV visualization
  • Audio VU meter mode
  • Normalled inputs to 10v
  • Outputs summed at OUT3

Specifications

  • Width: 6hp
  • Depth: 30mm
  • Power: +110mA / -43mA

Manufacturer product page here.
Product manual here.

The post Befaco x Molten Modular Motion MTR 3U Eurorack Attenuverter, Mixer and Visualiser Module appeared first on Elevator Sound.

]]>